• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.1-10
• /
• 2021

The electro-hydrostatic actuators (EHA) are widely used in various industrial fields since they can independently execute the function of the hydraulic power source and have high efficiency. Particularly, in the aviation field, the EHA is mainly designed as dual redundant asymmetric tandem actuator to mitigate failure and minimize installation space. However, aviation EHAs designed in the form of dual redundant asymmetric tandem actuator have the disadvantage of decreased durability performance due to the occurrence of force fighting. In this paper, the controller is designed based on backstepping technique to improve control performance and reduce force fighting for aviation EHA. The augmented state observer is proposed to estimate the states required for control. Through simulation, it was verified that the proposed controller had superior control performance and significantly reduces the force fighting compared to the general PI controller.

• Journal of the Korean Society of Radiology
• /
• v.16 no.6
• /
• pp.703-708
• /
• 2022

A detector module measuring the depth of interaction(DOI) was designed to improve the spatial resolution of positron emission tomography(PET). The scintillation pixel array consists of two layers, and a light guide is inserted between the layers to make the light generated through the gamma-ray event different for each layer. There are four light guides, and one light guide is designed to be coupled to a 2 × 2 array of scintillation pixels. The light generated from the top layer is moved to the photosensor with a wider distribution through the light guide, and the light generated from the bottom layer is incident on the photosensor with a narrower distribution than the top layer. When a flood image is reconstructed based on the signals obtained from the photosensor by different distributions, scintillation pixels are imaged at different positions for each layer. To verify this, a DETECT2000 simulation tool that simulates the behavior of light in a scintillator was used. By designing a scintillation pixel array, a detector consisting of a light guide and a photosensor, a gamma ray event was generated in all scintillation pixels to obtain a flood imgae. As a result, it was confirmed that the top and bottom layers were imaged at different positions and completely separated. When this detector is applied to PET, it is considered that image quality can be improved through imporved spatial resolution.

• Journal of Aerospace System Engineering
• /
• v.16 no.2
• /
• pp.63-72
• /
• 2022

As interest in microsatellites increases, research has been actively conducted recently on the performance and use, as well as the orbital design and deployment techniques, for the microsatellite constellations. The purpose of this study was to investigate orbital deployment techniques using thrust and differential atmospheric drag control (DADC) for the Walker-delta constellation. When using thrust, the time and thrust required for orbital deployment vary, depending on the separation speed and direction of the satellite with respect to the launch vehicle. A control strategy to complete the orbital deployment with limited performance of the propulsion system is suggested and it was analyzed. As a result, the relationship between the deployment period and the total thrust consumption was derived. It takes a relatively longer deployment time using differential air drag rather than consuming thrusts. It was verified that the satellites can be deployed only with differential air drag at a general orbit of a microsatellite constellation. The conclusion of this study suggests that the deployment strategy in this paper can be used for the microsatellite constellation.

• Journal of Software Assessment and Valuation
• /
• v.16 no.1
• /
• pp.55-63
• /
• 2020

Lasers for optical broadband communication systems should have excellent frequency selectivity and modal stability. DFB lasers have low lasing frequency shift during high speed current modulation. In this paper, when a refractive index grating and a gain grating are simultaneously present in a DFB laser having a wavelength of 1.55 ㎛, the dielectric film is coated so that reflection does not occur on the right mirror surface, so that ρ_r=0. For the first mode, which requires a minimum gain at the threshold, the beam distribution of the oscillation mode in the longitudinal direction and the radiated power ratio P_l/P_r were analyzed and compared for the cases of the phase of ρ_l=π and π/2. If the phase of ρ_l=π, in order to obtain a low threshold current and high frequency stability, κL should be greater than 8. In the case of the phase of ρ_l=π/2, for low threshold current, κL is necessary to be 1.0, where the oscillation frequency coincides with the lattice frequency. DFB lasers with an anti-reflection coated mirror have excellent mode selectivity than 1.55um DFB lasers with two mirror facets

• Journal of Navigation and Port Research
• /
• v.46 no.4
• /
• pp.321-330
• /
• 2022

Busan New Port manages the largest volume of traffic among Korean ports, and accounts for 68.5% of the total volume of the Busan port. Due to this increase in volume, ultra large container ships call at Busan New Port. When the additional south container terminal as well as ongoing construction project of the west container terminal are completed, various encounters may occur at the Busan New Port entrance, which may cause collision risk.s Thus, the purpose of this study was to provide a plan to improve the safety of vessel traffic, in the in/out bound fairway of Busan New Port. For this purpose, the status of arrivals and departures of vessels in Busan New Port, was examined through maritime traffic flow analysis. Additionally, risk factors and safety measures were identified, by AHP analysis with ship operators of the study area. Also, based on the derived safety measures, scenarios were set using the Environmental Stress model (ES model), and the traffic risk level of each safety measure was identified through simulation. As a result, it is expected that setting the no entry area for one-way traffic would have a significant effect on mitigating risks at the Busan New Port entrance. This study can serve as a basis for preparing safety measures, to improve the navigation of vessels using Busan New Port. If safety measures are prepared in the future, it is necessary to verify the safety by using the traffic volume and flow changes according to the newly-opened berths.

• Journal of the Society of Disaster Information
• /
• v.19 no.1
• /
• pp.161-172
• /
• 2023

Safety education delivered to construction workers in a lecture manner has limitations in concentration and immersion, so delivery power and interest are low. In order to improve unstable behavior through education and prevent safety accidents, it is necessary to change the paradigm to hands-on education. Purpose: Experiential safety education aims to contribute to preventing accidents for construction workers by quickly recognizing risks, improving emergency response skills, and verifying the effectiveness of pre- and post-learning. Method: Based on a survey of workers who experienced the same work environment as the actual construction site, an opinion survey on the pre- and post-safety experience education and a variable measurement tool were planned, and a research hypothesis was established. Results: The Bayesian theory and MC simulation analysis were used to analyze the structural equation model, and the change in construction worker behavior was confirmed through the intended safety (A), non-experiential education in the sub-area of anxiety (B), average, standard deviation, and minimum and maximum values. Conclusion: The effect of education and industrial accidents are reduced only when construction workers are motivated to participate.

• Journal of the Korean Society of Radiology
• /
• v.17 no.2
• /
• pp.175-184
• /
• 2023

Based on the actual shape of the detector and the data provided by the manufacturer, the shape of the detector was implemented through Penelope simulation and applied to the appropriate four-layer thickness based on the efficiency obtained from the measurements. Efficiency calculations to determine the effect of the simulated number of Full Energy Peak Efficiency(FEPE) channels in the detector and the outside contact layer in the crystal on the Full Energy Peak Efficiency were performed for various four-layer thicknesses of 0.3, 0.5, 0.7, 1.0, 1.2, and 1.4 mm using the Penelope Code. When the thickness of the external contact layer was increased by 5 times, the Full Energy Peak Efficiency decreased by about 36% for 59.50 keV, and the Full Energy Peak Efficiency decreased by 10% for 1836. In addition, as it increased by 10 times, the Full Energy Peak Efficiency decreased by about 20% for 59.54 keV, and 7% for 1836.01 keV. The Penelope simulated Full Energy Peak Efficiency channel decreases exponentially with the increase in the four layers. In addition, it was confirmed that the total effect curve was well matched with a relative difference of less than 3.5% in the 0.3-1.4 mm dead layer thickness region. However, it was found that the inhomogeneous dead layer is still a parameter in the Monte Carlo model.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.4
• /
• pp.16-30
• /
• 2023

As the concept of metaverse has received great attention, interest in metaverse related to landscape architecture is also increasing. The aim of this research is to understand the potential and tasks of applying metaverse in the field of landscape architecture by analyzing the user experience of a metaverse platform. The object of the research is Meta-Everland built in the Roblox platform, which has the most users among landscape architectural metaverses in Korea. NPS of 30 users who have been to Everalnd was investigated after using Meta-Everland with interviews. NPS before the metaverse experience was -16 and NPS after the experience was -24. This result means that the promotion level was lowered after the experience of the metaverse. There were three causes of lowered NPS: lack of users, low-quality graphics and interface, and lack of content. The factor of lack of users was the result of the other two problems. The factor of low technical quality is hard to be improved in a short period of time. Therefore, the main task to improve the metaverse is developing better metaverse content related to landscape architecture. It is more appropriate to develop metaverse-specific content rather than improve reality issues. Applying AR and VR devices, enhancing communication function, and developing potential as a simulation device are needed to be considered.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.4
• /
• pp.349-361
• /
• 2019

Objectives: The purpose of this study was to investigate nursing students' knowledge, awareness and performance and to identify the influencing factors on performance of standard precaution for Healthcare-associated Infection. Methods: Subjects were 334 nursing students who were 3rd and 4th years in the nursing university in Gwangju. Data were collected using questionnaires from April 24 to May 25, 2018. The collected data was analyzed by descriptive statistics, pearson's correlation coefficient and stepwise multiple regression using IBM SPSS 21.0 program. Results: Mean scores of knowledge, awareness and performance about standard precaution for Healthcare-associated Infection were 19.95±2.43, 4.71±0.37, 4.55±0.49, respectively. Statistically significant differences were shown in the performance of standard precaution related to grade(t=-3.627, p=.000) and experience of infection prevention education(t=3.239, p=.001). Significant relationships were found among knowledge(r=.201, p=.000), awareness(r=.522, p=.000) and performance of standard precaution in nursing students. The results of stepwise multiple regression indicates that awareness(β=.507, p=.000) and grade(β=.169, p=.000) and experience of infection prevention education(β=.094, p=.043) predicts 30.8% in performance of standard precaution(F=50.520, p=.000). Conclusions: to enhance performance of standard precaution for nursing students, it is necessary to develop and utilize a program that experience of infection prevention education according to the appropriate grade group and enhances awareness.

• Journal of the Korean Society of Radiology
• /
• v.17 no.2
• /
• pp.207-213
• /
• 2023

Computed tomography (CT) images are used as the basis for proton Bragg peak position estimation and treatment plan simulation. During the Hounsfield Unit (HU) based proton stopping power ratio (SPR) estimation, small differences in the patient's density and elemental composition lead to uncertainty in the Bragg peak positions along the path of the proton beam. In this study, we investigated the potential of dual-energy computed tomography image-based proton SPRs prediction accuracy to reduce the uncertainty of Bragg peak position prediction. Single- and dual-energy images of an electron density phantom (CIRS Model 062M electron density phantom, CIRS Inc., Norfolk, VA, USA) were acquired using a computed tomography system (Somatom Definition AS, Siemens Health Care, Forchheim, Germany) to estimate the SPRs of the proton beam. To validate the method, it was compared to the SPRs estimated from standard data provided by the National Institute of Standards and Technology (NIST). The results show that the dual-energy image-based method has the potential to improve accuracy in predicting the SPRs of proton beams, and it is expected that further improvements in predicting the position of the proton's Bragg peak will be possible if a wider variety of substitutes with different densities and elemental compositions of the human body are used to predict the SPRs.