• Journal of the Korea Concrete Institute
• /
• v.11 no.3
• /
• pp.153-160
• /
• 1999

Water soluble hydroxyalkyl methycellulose ethers are used in a variety of applications incluing building industry as a supplementary agent used for incresing adhesives, water retention capacity, workability and viscosity modify. Water retention capacity(WRC) is the capability to contain water in the ploymer chain under condition of being mixed with cement. In general, the WRC is affected by the viscosity, the adding amount, the particle size, the rate of dissolving and the amount of substituted chemical in cellulose ethers. In the other words, WRC is increased as higher the viscosity, more adding amount, finer the particle size and longer the dissolving time of cellulose ethers. This thesis investigated each factor that effect the WRC, particularly the relation between degree of substitution(DS), molar of substitution(MS) and WRC. It is observed that WRC is not nearly affected by DS of cellulose ethers, but is changes proportionally as MS increases in the narrow range(0.10~2.25)

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.691-694
• /
• 2004

The effects of polymer-cement ratio and antifoamer content on the setting time and durability of high-fluidity polymer-modified mortars using redispersible polymer powder are examined. As a result, the setting time of the polymer-modified mortars using redispersible polymer powder tend to delayed with increasing polymer-cement ratio, regardless of the antifoamer content. The water absorption and chloride ion penetration depth of the high-fluidity polymer-modified mortars using redispersible polymer powder decrease with increasing polymer-cement ratio and antifoamer content. The water absorption and chloride ion penetration improvement is attributed to the improved bond between cement hydrates and aggregates because of the incorporation of redispersible polymer powder.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.731-734
• /
• 2004

Admixture compounds for reducing setting time and accelerating early strength development of redispersible polymer powder-modified mortars were made by mixing various inorganic accelerating inorganic materials. Redispersible polymer powder-modified mortars are prepared with various accelerator contents, and it was tested for setting time, flexural and compressive strengths. As a result, the accelerators contribute to strength development of the mortars in the early curing age of 12h or less. In the viewpoint of early strength development of redispersible polymer powder-modified mortars, an accelerator content of $20\%$ is recommended.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.465-468
• /
• 2006

This paper investigates the effect of curing conditions on the strength improvement of polymer-modified mortars using epoxy resin with various curing methods. The polymer-modified mortars using epoxy resin are prepared with various polymer-cement ratios, and subjected to standard, hot water, heat cure and autoclave cures. The epoxy-modified mortars are tested for flexural and compressive strengths at desired curing methods. From the test results, the flexural and compressive strengths of the epoxy-modified mortars are hardly improved by the autoclave and hot water cures compared to the ideal cure of $20^{\circ}C$. Among the four types of curing methods, the strengths of the heat cured epoxy-modified mortars is largely improved. Especially, it is obtained in the mortars sealed with PVDC film.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.617-620
• /
• 2006

The EVA polymer is used as a modifier in the repair mortar, which contains various admixtures and mineral admixtures. It has been reported that the effect of polymer in cement mortar by the cement-polymer ratio only, but effect of admixtures over the polymer mortar was unknown. In this study, the fresh and mechanical properties of polymer cement mortar influenced by the range of silica fume ratio were investigated. It was found that with increasing the ratio of silica fume, mechanical properties(compressive strength, flexural strength, adhesive strength) of repair mortar is improved and drying shrinkage is increased.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.103-104
• /
• 2017

This paper is to provide a method to prevent air loss of the concrete using reject ash based ternary blended aggregate due to absorption of AE agents by reject ash by adding AE agents into reject ash before mixing concrete. Test results indicate that air loss due to presence of reject ash in ternary blended aggregate can be recovered by over use of AE agents into aggregate directly before mixing.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.41-42
• /
• 2011

In this study, VA/E/MMA-modified mortars with nitrite-type hydrocalumite were prepared with various calumite contents and polymer binder-ratios, and tested for chloride ion penetration, carbonation and drying shrinkage. As a result, the chloride ion penetration and carbonation depths were somewhat increased with calumite contents, but those were remarkably decreased depending on the polymer-binder ratios. The 28-d drying shrinkage showed a tendency to increase with polymer-binder ratios and calumite contents. VA/E/MMA-Modified mortars with a calumite of 10 % were dissatisfied with KS requirements. Accordingly, a calumite content of 5 % for the VA/E/MMA-modified mortars with calumite is recommended.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.77-78
• /
• 2011

This study is analysis of effect of binder types and replacement ratio on the properties of blast furnace slag mortar using the recycled fine aggregates. The results of the study were was follows. Compressive strength was increased according to an increase in replacement ratio of fine particle cement and gypsum. Absorption was reduced according to an increase in replacement ratio of fine particle cement and recycled aggregate fine powder.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1416-1417
• /
• 2006

The increase of carbon contents in fly ashes accelerate the corrosion of steel embedded in ordinary portland cement mortar. Cement losses its identity of colour, when the % of carbon is increased. More than 60[%] area was rusted, when carbon content is increased beyond 8[%] for the exposure period of one year. Comparable corrosion rate with OPC was obtained up to 6[%] carbon level only. The tolerable limit of replacement for various admixed carbon system under aggressive alternate wetting and drying condition with 3[%] NaCl was found to be 6 to 8[%].

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.68-69
• /
• 2019

Integrating 3D printing into architecture is gaining attention because it allows construction of construction structures without formwork. Among them, 3D printing construction materials must have high flow performance and at the same time ensure the performance that does not collapse during lamination. Therefore, in this study, we tried to determine the fluidity and lamination properties of mortar formulations, and set the thickener incorporation ratio as the formulation parameters. As a result of this experiment, it was confirmed that the lamination performance was secured from the thickening agent mixing rate of 1.5%.