• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제12권3호
• /
• pp.221-229
• /
• 1992

A series of experiments on the resuspension of deposited fine-grained sediments were carried out in a recirculating straight flume to investigate the influence of the sediment type, water content and bed shear stress (${\tau}_b$) on the resuspension characteristics of the sediments. The sediments were sampled from Youngkwang coast and Youngdo coast which are located in the western sea and southeastern sea of Korea, respectively. Critical bed shear stress (${\tau}_c$) for resuspension was deduced for each experimental series. For the same sediment, critical bed shear stress for resuspension decreased but suspension mass or rate increased with increasing water content. The resuspension of deposited fine-grained sediments depended strongly on the water content, and the sediment type characterizing the inter-particle bond strength. It has been found that critical bed shear stress for resuspension in the unidirection flow is about 4 times higher than that in the combined wave-current flow, In case of lower bed shear stress, after an initially high suspension, suspension mass approaches a constant value due to the bed hardening with increasing time, but in case of higher bed shear stress, suspension mass increased successively due to the bed softening with time. Initial suspension rate, $E={\alpha}_3({\tau}_b/{\tau}_c-1)^{\beta}$ (where ${\alpha}_3$ and ${\beta}$=empirical constants), was estimated for each experimental series, ${\alpha}_3$ and ${\beta}$ values for the same sediment increased with water content.

• The Korean Journal of Pesticide Science
• /
• 제20권2호
• /
• pp.172-180
• /
• 2016

This study was conducted to evaluate the relations between the exposure level of organophosphates (OPs) pesticide and application factors among rural farmers. The urinary dialkylphosphates, metabolites of organophosphorus pesticides, including DMP, DEP, DMTP and DETP were analyzed by GC/MSD and GC/MS/MS. The DMP and DMTP were detected more in the use of a speed sprayer without cap than with a capped one. Also, the less farmers wore the personal protective equipment (PPE), the more these were detected. The amount of organophosphorus exposure was the highest in the use of a power sprayer. However, it was low when a farmer applied pesticides with a speed sprayer with cap and wore more PPE. In this study, the detection rate was analyzed by chi-square test, the exposure level of OPs was analyzed by a generalized linear model.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.234-234
• /
• 2023

유해 남조 대발생(Harmful Algal blooms, HABs)이 담수호에 발생하면 마이크로시스틴과 같은 독성물질과 맛·냄새 물질을 생성하여 상수원이용과 친수활동을 방해한다. 그래서 유해 남조 대발생 전 유해남조 세포수를 예측하여 선제적 대응하는 것은 중요하다. 따라서 본 연구는 머신러닝기반 Random Forest(RF)를 활용하여 팔당댐 앞의 유해남조 세포수를 예측하는 모델을 개발하고 성능을 평가하고자 한다. 모델 구축을 위해 2012년 4월부터 2021년 12월까지의 팔당호(삼봉리, 경안천) 및 남북한강(의암댐~이포보)권역의 조류, 수질, 수리/수문, 기상 자료를 수집하여 입력 및 출력 자료로 이용하였다. 수집된 데이터에는 다양한 입력변수들이 있어 남조 세포수 예측 성능 비교를 위한 전체 26개 변수 적용과 통계학적으로 상관관계가 높은 12개 변수 적용을 통해 모델을 구축하였다. 입력, 출력 자료로 이용한 유해남조 세포수는 로그변환된 값으로 사용하였으며 일반적인 조류 시료 채취기간이 7일이므로 7일 후를 예측하기 위한 모델을 구축하였다. 구축한 모델의 성능은 실측데이터와 예측데이터의 R²로 산출하여 평가하였다. 전체 26개 입력변수로 모델 구축 후 학습 및 검증 수행 결과 R²의 학습 0.803, 검증 0.729로 나타났고, 유해남조 세포수와 유의미한 상관관계를 보이는 12개 입력변수로 모델 구축 후 학습 및 검증 수행 R²은 학습 0.784, 검증 0.731로 나타났다. 두 모델의 성능을 살펴본 결과 입력변수 개수의 변화에 따른 성능차이는 크지 않은 것으로 나타났으며, 남조세포수 예측을 위한 모델로서 활용가능함을 알 수 있었다. 향후 연구에서는 Random Forest 외 다른 기계학습 모델들과 딥러닝 모델을 통해 남조세포수 예측 성능이 높은 모델을 구축해볼 필요성이 있다.

• Composites Research
• /
• 제35권6호
• /
• pp.447-455
• /
• 2022

Currently, the problem of pollution of the marine environment by microplastics is emerging seriously internationally. In this study, to develop a lightweight portable microplastic collection device, the types and number of microplastics in 21 coastal areas nationwide in Korea were investigated. And CFRP (Carbon Fiber Reinforced Plastic), GFRP (Glass Fiber Reinforced Plastic), ABS (Acrylonitrile Butadiene Styrene copolymer) and aluminum were applied for design and analysis of microplastic collection device to have the durability, corrosion resistance and lightweight. As a result of sample collection and classification from the shore, it was confirmed that microplastics were distributed the most in Hamdeok beach, and the polystyrene was found to be mainly distributed microplastics. Particle information through coastal field survey and CFD (Computational Fluid Dynamics) analysis were used to analyze the flow rate and distribution of particles such as sand and impurities, which were applied to the structural analysis of the cyclone device using the finite element method. As a result of structural analysis considering the particle impact inside the cyclone device, the structural safety was examined as remarkable in the order of CFRP, GFRP, aluminum, and ABS. In the view of weight reduction, CFRP could be reduced in weight by 53%, GFRP by 47%, and ABS by 61% compared to aluminum for the cyclone device.

• Korean Journal of Environmental Biology
• /
• 제37권3호
• /
• pp.433-445
• /
• 2019

This study was designed to develop simple tools to easily and efficiently predict the occurrence of algal bloom in agricultural lakes. Physicochemical water quality parameters were examined to reflect the phytoplankton productivity in 182 samples collected from 15 agricultural lakes from April to October 2018. Total phytoplankton abundance was significantly correlated with chlorophyll-a (Chl-a) (r=0.666) and Secchi depth (SD) (r= -0.351). The abundances of cyanobacteria and harmful cyanobacteria were also correlated with Chl-a (r=0.664, r=0.353) and SD (r= -0.340, r= -0.338), respectively, but not with total nitrogen (TN) and total phosphorus (TP). The Chl-a concentration was correlated with SD (r= -0.434), showing a higher similarity than phytoplankton abundance. Therefore, Chl-a and SD were selected as diagnostic factors for algal bloom prediction, instead of analyzing the standing crop of harmful cyanobacteria used in algae alarm systems. Specifically, accurate diagnoses were made using realtime SD measurements. The algal bloom diagnostic tool is an inverse cone-shaped container with an algal bloom diagnosis chart that modified SD and turbidity measurement methods. Lake water was collected to observe the number of rings visible in the container or the number indicated in each ring, depending on the degree of algal bloom,and to determine the final stage of algal blooming by comparison to the colorimetric level on the diagnosis chart. For an accurate diagnosis, we presented 4-step diagnostic criteria based on the concentration of Chl-a and the number of rings and a fan-shaped algal bloom diagnosis chart with Hexa code names. This tool eliminated the variables and errors of previous methods and the results were easily interpreted. This study is expected to facilitate the diagnosis of algal bloom in agricultural lakes and the establishment of an efficient algal bloom management plan.

• Korean Journal of Soil Science and Fertilizer
• /
• 제12권1호
• /
• pp.1-14
• /
• 1979

The fertility which is the combined factor is one of the important capability determiants of paddy soils. In this study, we aimed at attaining a quantitative evaluation of soil fertility and further establishing an objective fertility classification on the basis of the fertility evaluation. The samples used in this series studies were collected from Korean paddy field. They include deltas, flood plains, coastal plains, valley plains, fans and low terraces. On the basis of correlation analysis, factor analysis was applied to a set of 15 variables. As a result of factor analysis, five mutually independent and clearly definable fertility component factors were extracted from the 15 variables for the whole 90 surface soil samples. The fertility status of each sample soil could be objectively designated by the score of the five factors. As a means of summarizing the information obtained, taxonomic distances between all pairs of the samples were computed from these five factor scores further to be subjected to numerical taxonomy. Seven fertility groups were formulated, each of which was characterized by one or more of the fertility components. As this fertility classification was based on the present state of soil properties, it would be useful in pointing to the proper direction of further fertility amelioration and improvement for each group to enhance potential productivity of Korean paddy fields.

• Radiation Oncology Journal
• /
• 제18권2호
• /
• pp.138-149
• /
• 2000

Purpose : It was studied that the relationship between radiation dose, dose rate and the frequency of chromosomal aberrations in peripheral lymphocytes. Methods and Materials : Peripheral lymphocytes were irradiated in vitro with 6 MeV X-ray at dose ranges from 50 cGy to 800 cGy. The variations of the frequency of chromosomal aberrations were observed according to different radiation dose rate from 20 cGy/min to 400 cGy/min at constant total dose of 400 cGy which it was considered as factor to correct biological radiation dose measurement. Results : The yields of lymphocytes with chromosomal aberrations (dicentric chromosome, ring chromosome, acentric fragment pairs) are 0% at 50 cGy, 9% at 100 cGy, 20% at 200 cGy, 27% at 300 cGy, 55% at 400 cGy, 88% at 600 cGy, and 100% at 800 cGy. The value of Ydr is 0.000 at 50 cGy, 0.093 at 100 cGy, 0.200 at 200 cGy, 0.354 at 300 cGy, 0.612 at 400 cGy, 2.040 at 600 cGy, and 2.846 at 800 cGy. The relationship between radiation (D) and the frequency of dicentrlc chromosomes and ring Chromosomes (Ydr) can be expressed as Ydr=0.188${\times}$10$^{-2}$ D/Gy+0.422${\times}$10$^{-4}$/Gy$^{2}$${\times}$D$^{2}$ The Value of Qdr is 0.000 at 50 cGy, 1.000 at 100 cGy, 1.000 at 200 cGy, 1.333 at 300 cGy, 1.118 at 400 cGy, 2.318 at 600 cGy, and 2.846 at 800 cGy. When 400 cGy is irradiated with different dose rate each of 20, 40, 60, 80, 100, 160, 240, 320, and 400 cGy/min, Ydr is each of 0.982, 0.837, 0.860, 0.732, 0.763, 0.966, 0.909, 1.006, and 0.806, and Qdr is each of 1.839, 1.555, 1.654, 1.333, 1.381, 1.750, 1.6000, 1.710, and 1.318. Conclusion : There are not the significant variations of Ydr and Qdr values according to different dose rate. And so radiation damage is influenced by total exposed radiation doses and is influenced least of all by different dose rate when it is acute single exposure.