• Journal of KIISE:Information Networking
• /
• v.35 no.5
• /
• pp.437-452
• /
• 2008

IEEE 802.16j MR networks introduce RSs (Relay Stations) within the IEEE 802.16 system in order to enhance the data throughput and extend the coverage. However, the current standardization defines that the BS (Base Station) controls MS's (Mobile Station's) handover, not only it induces the large signaling overhead but also handover latency could increase. In this paper, we propose a handover protocol in the MR networks where the high capability RSs that can process the MS's control functions are deployed. First, we classify the handover scenarios for the MR networks with the high capability RSs. Then, we define the MAC handover procedure, corresponding MAC management messages and the transmission routes for the proposed messages so that an 802.16e MS can perform seamless handover without noticing it is attached to an MR network. The simulation results show that the proposed handover protocol not only reduces the MAC management message overhead transferred through the wireless links compared to IEEE 802.16j/D1, which is the current standard for MR networks, but also performs the rapider and more secure MS handover than IEEE 802.16e and IEEE 802.16j/D1.

• Journal of Digital Contents Society
• /
• v.14 no.4
• /
• pp.557-564
• /
• 2013

An important research challenge about the traditional Internet environment is to enable open networking architecture on which end users are able to innovate the Internet based on the technologies of network programmability, virtualization, and federation. The SDN (Software Defined Network) technology that includes OpenFlow protocol specifications, is suggested as a major driver for the open networking architecture, and is closely coupled with the classical Internet (non-SDN). Therefore, it is very important to keep the integrated SDN and non-SDN network infrastructure reliable from the view point of network operators and engineers. Under this background, this paper proposes an operations and management framework for the combined software defined network environment across not only a single-domain network, but also multi-domain networks. The suggested framework is designed to allow SDN controllers and DvNOC systems to interact with each other to achieve sustainable end-to-end user-oriented SDN and non-SDN integrated network environment. Plus, the proposed scheme is designed to apply enhanced functionalities on DvNOC to support four major network failure scenarios over the combined network infrastructure, mainly derived from SDN controllers, SDN devices, and the connected network paths.

• Land and Housing Review
• /
• v.6 no.3
• /
• pp.117-127
• /
• 2015

Korean government has launched a new public rental housing policy for younger generation suffering from instable housing conditions in CBD area. This paper is to analyze the financial feasibility of urban public rental housing projects, based on its cash flows. Urban rental housing projects should find out the way to reduce costs and to secure cheap land, because of the high land price in CBD area and complex relationship of legal rights. Project types are categorized by the land acquisition method and district characteristics. For 10 sample projects, financial feasibility was analyzed. Cash flows were calculated on the design plan and 16 scenarios were made by combining 4 important variables. The variables are increase rate of land price, increase rate of monthly rents, ratio of public and market rents, and the interest rate of National Housing Fund. The findings are as follows. Government land rent-type can reduce initial costs because it is not necessary to buy land. However, total NPV is lowered at the time of liquidation due to the land return. Private land acquisition-type require more initial costs. But the NPV at liquidation time increases with land disposal. To improve financial feasibility, acquisition-type should be preferred in high land-price area and rent-type should be preferred in low land-price area. Among influencing variables, the rate of increase in land price and the ratio of public and market rents turned out to be the most important. Although the ratio of public and market rents can be controllable, high ratio will cause the burden of tenants. Therefore, interest rate adjustment of National Housing Fund is more desirable.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2000.04a
• /
• pp.357-364
• /
• 2000

기존의 웹 디자인은 웹이라는 매체의 특성 상 디자인적인 요소가 매우 중요함에도 불구하고 디자인은 위한 구체적인 방법론이 미약하다. 특히, 많은 소비자들을 유인하고 구매를 촉발시켜야 하는 인터넷 쇼핑몰의 경우에는 더욱 더 그럼하에도 불구하고 이를 위한 전략적인 방법론이 부족하다. 즉, 기존 연구들은 제품의 다양성, 서비스, 촉진, 항해량, 편리성, 사용자 인터페이스 등이 중요하다고 하였지만 실제 인터넷 쇼핑몰을 디자인하는 입장에서는 활용하기가 상당히 애매하다. 그 이유는 이들 요인들은 서로 영향관계를 가지고 있어서 사용자 인터페이스가 복잡하면 항해량이 늘어나 편리성이 감소하고, 제품이 늘어나더라도 검색엔진을 사용하면 상대적으로 항해량이 감소하게 되어 편리성이 증가한다. 따라서, 이들 요인을 활용하여 인터넷 쇼핑몰을 구축하려면 요인간의 영향관계를 면밀히 파악하고 이 영향요인이 소비자의 구매행동에 어떠한 영향을 주는지가 충분히 검토되어야 한다.이에 본 연구에서는 퍼지인식도를 이용하여 인터넷 쇼핑몰 상에서 소비자의 구매행동에 영향을 주는 요인을 추출하고 이들 요인간의 인과관계를 도출하여 보다 구체적이고 전략적으로 인터넷 쇼핑몰을 디자인할 수 있는 방법으로 web-Cogmulator를 제시한다. Web-Cogmulator는 소비자의 쇼핑몰에 대한 암묵지식 형태의 구매행동을 형태지식화하여 지식베이스 형태로 가지고 있기 때문에 인터넷 쇼핑몰의 다양한 요인의 변화에 따른 소비자의 구매행동을 추론 시뮬레이션하는 것이 가능하다. 이에 본 연구에서는 기본적인 인터넷 쇼핑몰 시나리오를 바탕으로 추론 시뮬레이션을 실시하여 Web-Cogmulator의 유용성을 검증하였다.를, 지지도(support), 신뢰도(confidence), 리프트(lift), 컨빅션(conviction)등의 관계를 통해 다양한 방법으로 모색해본다. 이 연구에서 제안하는 이러한 개념계층상의 흥미로운 부분의 탐색은, 전자 상거래에서의 CRM(Customer Relationship Management)나 틈새시장(niche market) 마케팅 등에 적용가능하리라 여겨진다.선의 효과가 나타났다. 표본기업들을 훈련과 시험용으로 구분하여 분석한 결과는 전체적으로 재무/비재무적 지표를 고려한 인공신경망기법의 예측적중률이 높은 것으로 나타났다. 즉, 로지스틱회귀 분석의 재무적 지표모형은 훈련, 시험용이 84.45%, 85.10%인 반면, 재무/비재무적 지표모형은 84.45%, 85.08%로서 거의 동일한 예측적중률을 가졌으나 인공신경망기법 분석에서는 재무적 지표모형이 92.23%, 85.10%인 반면, 재무/비재무적 지표모형에서는 91.12%, 88.06%로서 향상된 예측적중률을 나타내었다.ting LMS according to increasing the step-size parameter $\mu$ in the experimentally computed. learning curve. Also we find that convergence speed of proposed algorithm is increased by (B+1) time proportional to B which B is the number of recycled data buffer without complexity of computati

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.22-28
• /
• 2007

Spectrum spreading, in its general form, can be conceived as an artificial expansion of the signal bandwidth with respect to the minimum Nyquist band required to transmit the desired information. Spreading can be functional to several objectives, including resilience to interference and jammers and reduction of power spectral density levels. In the paper, signal spreading is manly used for increasing the received energy, thus satisfying link budget constraints, for terminals with low aperture antennas, without increasing the transmitted EIRP. As a matter of fact, in many mobile scenarios, even when MODCOD configurations with very low spectral efficiency (i.e. QPSK-1/4) in DVB-S2 standard, are used, the link budget cannot be closed. Spectrum spreading has been recently proposed as a technique to improve system performance without introducing additional MODCOD configurations under the constraint of fixed power spectrum density level at the transmitter side. To this aim, the design of spectrum spreading techniques shall keep into consideration requirements such as spectrum mask, physical layer performance, link budget, hardware reuse, robustness, complexity, and backward compliance with existing commercial equipments. The proposed implementation allows to fully reuse the standard DVB-S2 circuitry and is inserted as an 'inner layer' in the standard DVB-S2 chain.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.47-58
• /
• 2018

The heterogeneous cellular network (HCN) is most significant as a key technology for future fifth generation (5G) wireless networks. The heterogeneous network considered consists of randomly macrocell base stations (MBSs) overlaid with femtocell base stations (BSs). The stochastic geometry has been shown to be a very powerful tool to model, analyze, and design networks with random topologies such as wireless ad hoc, sensor networks, and multi- tier cellular networks. The HCNs can be energy-efficiently designed by deploying various BSs belonging to different networks, which has drawn significant attention to one of the technologies for future 5G wireless networks. In this paper, we propose switching off/on systems enabling the BSs in the cellular networks to efficiently consume the power by introducing active/sleep modes, which is able to reduce the interference and power consumption in the MBSs and FBSs on an individual basis as well as improve the energy efficiency of the cellular networks. We formulate the minimization of the power onsumption for the MBSs and FBSs as well as an optimization problem to maximize the energy efficiency subject to throughput outage constraints, which can be solved the Karush Kuhn Tucker (KKT) conditions according to the femto tier BS density. We also formulate and compare the coverage probability and the energy efficiency in HCNs scenarios with and without coordinated multi-point (CoMP) to avoid coverage holes.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.9
• /
• pp.11-18
• /
• 2011

This paper proposes a novel planning method for computer generated forces (CGFs) in war games that plans the behaviors of CGFs according to a given mission and situations. CGFs which are received their missions first plan their tasks for accomplishing the mission and then plan their behaviors for accomplishing each task. After that, they execute their planned behaviors considering the conditions of environments (in other words situations). The tasks and behaviors are hierarchically composed and include start conditions for beginning those and termination conditions for stopping those. CGFs first check whether the start condition of the planned behavior for accomplishing a task is satisfied or not in some degree and perform the behavior if satisfied continuously until the termination condition of the behavior will be met. If the termination condition is satisfied, then they check the start condition of the next planned behavior. This process will be repeated for accomplishing the mission. If the situations of CGFs are different by changing the environments from those of planning time, it may cause the start condition of the planned behavior to be dissatisfied. In this case, CGFs can decide a new behavior using fuzzy rule base. We realized our planning system and tested CGFs with a scenario. Experimental results showed that our system worked well and actively coped with situation changes. It will be possible to make CGFs that can do more autonomous behaviors if we continually develop our method.

• Smart Media Journal
• /
• v.9 no.2
• /
• pp.51-62
• /
• 2020

Starting with the "Smart Grid National Road Map" in 2010, the Smart Grid 2030 was introduced through the basic plan and implementation plan of the intelligent power grid with the goal of building the world's first national smart grid. In this paper, we intend to build a power domain ontology based on the power business platform based on the upper and lower conceptual models of the "Smart Grid Interoperability Standard Framework and Roadmap", the standard of implementation plan. Ontology is suitable for expressing and utilizing the smart grid conceptual model because it considers hierarchical structure as knowledge defines the properties of entities and relationships between entities, but there is no research related to them. Therefore, in this paper, the upper ontology was defined as a major category for smart grid-related fields, and the lower ontology was defined as detailed systems and functions for the upper ontology to construct the ontology. In addition, scenarios in various situations that could occur in the power system were constructed and significant inference results were derived through inference engines and queries.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.2
• /
• pp.531-542
• /
• 1997

In this paper,we propose applicable methodology using simple scenarios for the architecture and its procedure of sibnalling at the NNI for B-ISDN in Korea.By the recent technologies,the flexible and intergrated networks of the future are designed, and the infrastructure hardware and software of those networks are sdsigned based on the modular concepts.Also the ATM-based B-ISDN must be able to support the broadband transmission function for providing various services with diverse bandwidths such as multimedia serivce and the function for controlling services and bandwidth is necessaty.Currently,the trquirements at the NNI for B-ISDN in korea atr based on the network mode connection type which is connection setup strucuture.They must show the upper/lower layer conformance to have the flexibility in new services and guarantee the interoperability between the network functions.But,network functions and protocol specifications described in this paper are limity to the first stage target system in korea.Therefore,we present the modular architecture which is corresponding to the B-ISUP of HAN/B-ISDN with those characteristics.Currently applicable architecture and procedure for B-ISUP and the functions of expandable modular architecture are also proposed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.5
• /
• pp.543-551
• /
• 2014

This study has searched to find a program in order to manage simply and practically use the expelled AtoN database from the AtoN Simulator and to support the idea decision for the AtoN placement. It examines a program that manages AtoN database through the hierarchy structure, history card and endowment with condition same as a scenario. And accomplishes this study's goal owing to realizing AtoN operational software that helps for visual, hearing sense, fixed amount verification upon AtoN placement project. The AtoN operational software contributes not only flexible control like a newly establishment, relocation etc, but also supports idea decision for AtoN placement plan through many functions such as condition search, virtual sailing and fixed amount appraisal result exhibition, etc. Through utilization of this, it is to help upon the presupposition of the impact to ship or sailor about many designs and in addition, upon the judgment of whether or not for the efficiency and appropriation of the design. It is expected to reduce possible failure costs and management costs due to AtoN design and placement plans, because to compare more various designs thru the easier verification method.