• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.5
• /
• pp.767-774
• /
• 2015

In recent decades, health concerns related to sodium intake have caused an increased demand for salt or sodium-reduced foods. Umami substance can enhance taste sensitivity to NaCl and may offer a unique approach to replace and reduce the sodium content in foods. In this study, hot water extraction conditions of Wando sea tangle with high umami taste were investigated. Wando sea tangle harvested in June was selected for hot water extraction based on its free amino acids composition. The quality properties of sea tangle extract were investigated at various extraction temperatures ($60^{\circ}C$, $80^{\circ}C$, and $100^{\circ}C$) and times (1 h, 2 h, and 3 h). Sea tangle extracts at the extraction temperature of $100^{\circ}C$ contained the highest soluble solids (35.47%~36.93%), and crude protein (3.75%~4.00%). Viscosities of sea tangle extracts decreased with increasing extraction temperature. Umami amino acids (glutamic acid and aspartic acid) and sensory characteristics were best at extraction conditions of $100^{\circ}C$ for 2 h. Saltiness enhancement of sea tangle extract powder was determined. Saltiness intensities of NaCl solution after adding 1% sea tangle extract powder were enhanced (1.84~4.25-fold). At the same saltiness intensity, sodium contents of NaCl solution with 1% sea tangle extract powder were 12.24~24.33% lower than that of NaCl solution. These results suggest that it is possible to reduce sodium in foods with sea tangle extract as a natural salt enhancer without lowering overall taste intensity.

• Analytical Science and Technology
• /
• v.26 no.4
• /
• pp.256-261
• /
• 2013

The efficiency of the two extractions (refluxing extraction and heating-block extraction) was compared to develop the simple analytical method for the determination of capsaicinoids, including capsaicin and dihydrocapsaicin in red pepper powder. For the method development, the parameters, including particle size, extraction time and sample size, were evaluated using ultra high performance liquid chromatography (u-HPLC). It was found that the most effective extraction time of the refluxing extraction was 3 hr. The higher extraction efficiency was obtained with the fine particle of a mild red pepper powder, while the particle size did not affect the extraction efficiency in case of the hot red pepper powder. The higher extraction efficiency was obtained with the small size of sample taken because of the ratio of the large extracting solvent to sample amount. The extraction efficiency of the refluxing method was 3-9% higher than that of the heating-block method, however, the heating-block method could be applied to the determination of capsaicinoids in the red pepper powder for the purpose of quality control of the product.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.7
• /
• pp.817-823
• /
• 2009

This study was conducted to determine the optimal extraction conditions for maca by comparing the yields, total polyphenol contents, superoxide dismutase (SOD)-like activity and the nitrite scavenging ability. The proximate composition analysis showed 6.57% moisture, 12.83% crude protein, 1.05% crude fat, 4.80% ash and 74.75% carbohydrate. Maca was extracted with 7 different solvents (water, methanol, ethanol, acetone, ethyl acetate, chloroform and hexane) and the extracts were tested for biological activities. The extraction yields of water, methanol and ethanol extracts were 46.2%, 21.4% and 16.8%, respectively. Acetone, ethyl acetate, chloroform and hexane exhibited very low extraction yield, ranging from 0.2 to 1.0%. Total polyphenol contents and the nitrite scavenging ability were the highest in water extract. Electron donating ability and the SOD-like activity were the highest in methanol extract. When water extract was drawn out at different extraction temperatures (30, 70, $100^{\circ}C$) and time (1, 3, 5 hr), the improved biological activities (total polyphenol contents, electron donating ability, SOD-like activity and nitrite scavenging ability) were found in extracts treated at $100^{\circ}C$ for 3 or 5 hrs.

• Food Science and Preservation
• /
• v.10 no.3
• /
• pp.370-375
• /
• 2003

To obtain the oil sesame, walnut, whole wheat, and rice bran were extracted for 1, 3, or 6 hr by a shanking water bath(35$^{\circ}C$ and 100 rpm), and by soxhlet extractor(80$^{\circ}C$) for 1, 3 or 6 hr, respectively. The highest yield of extracted oil was obtained from the walnut(63.07％ weight) and the whole wheat showed the lowest extraction yield of oil(1.13％ weight). Major fatty acids from the extracted oils were linoleic, oleic, and palmitic acid. The maximum contents of total phytosterol in sesame, walnut, whole wheat, and rice bran were 0.44, 1.57, 2.25, and 2.03(％ weight), respectively. Besides, total tocopherol contents in sesame, walnut, whole wheat, and rice bran were maxima 3.42, 0.16, 2.92, and 0.07(％ weight), respectively. From the extracted oils, structured lipids(SL) were synthesized by the interesterification reaction with conjugated linoleic acid(CLA) in a shanking water bath at 55$^{\circ}C$. When the reactions(1:3 substrate molar ratio, extracted oil:CLA) were conducted for 24 hr, maxima 23.75 mol％ of CLA incorporation was obtained from walnut oil and, in other cases, 16.28 - 19.15 mol％ of CLA was found in the produced SL triacylglycerol molecules.

• Korean Journal of Food Science and Technology
• /
• v.22 no.7
• /
• pp.858-864
• /
• 1990

In an attempt to establish efficient extraction conditions of beef extract by hot water extraction, effects of extraction time, temperature and amount of added water were investigated. Beef extract was prepared with three different extraction conditions and quality parameters for optimization of extraction condition were content of total nitrogen, non protein nitrogen and collagen in terms of extractability. As a result, in order to produce beef extract from beef by hot water extraction, it was efficient to extract at $97^{\circ}C$ for 75 minutes with the addition of 2.5 times water. Proper extraction condition under pressure was at $125^{\circ}C$ for 30 minutes with the addition of 2 times water.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.3
• /
• pp.384-390
• /
• 2009

Extraction characteristics of citron (Citrus junos Sieb. ex Tanaka) seeds and functional properties of corresponding extract were monitored by response surface methodology (RSM). Maximum extraction yield of 20.23% was obtained at extraction temperature of $50.23^{\circ}C$, extraction time of 3.03 hr, and shaking velocity of 400.06 rpm. At extraction temperature, extraction time, and shaking velocity of $49.88^{\circ}C$, 2.72 hr, and 400.39 rpm, respectively, maximum polyphenol content was 4.37 mg/g. At extraction temperature, extraction time, and shaking velocity of $50.28^{\circ}C$, 3.42 hr, and 399.96 rpm, respectively, maximum electron donating ability (EDA) was 49.69%. Maximum nitrite scavenging activity (NSA) was 47.79% at extraction temperature, extraction time, and shaking velocity of $49.19^{\circ}C$, 0.68 hr, and 602.95 rpm, respectively. Based on superimposition of 3-dimensional RSM with respect to extraction yield, polyphenol, EDA, and NSA, optimum ranges of extraction conditions were extraction temperature of $50^{\circ}C$, extraction time of about 3 hr, and shaking velocity of 400 rpm.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.4
• /
• pp.320-326
• /
• 2001

To obtain the basic data for preparing edible or biodegradable film, fish meal protein isolates (FMPI) were prepared through alkaline extraction. And FMPI's properties and the ester compounds permeability of FMPI film were measured. FMPI were extracted under various extracting time with 0.2 N NaOH solution at $60^{\circ}C$, Recovery ratios of FMPI extracted from fish meal were increased with extracting time increasing. Surface hydrophobicity of FMPI extracted for 1 hr showed highest value. Emulsifying activity index (EAI) was increased with the increasement of extracting time but its emulsifying stability index (ESI) showed an inverse results. Viscosity of FMPI solution showed the highest value at pH 2 but showed the lowest value at pH 4, The higher concentration of sorbitol as plasticizer showed the higher ethyl acetate permeability of FMPI film, Ethyl acetate permeability of FMPI films according to kind of plasticizers showed different degree and increased in order as follow: polyethylene glycol, glycerol and sorbitol. Ester compounds having the lower molecular weight showed the higher permeability. Increment of temperature increased the ethyl acetate permeability of FMPI film. FMPI haying higher surface hydrophobicity made FMPI film be higher tensile strength. On elongation of FMPI films, kinds of plasticizer were more effective than surface hydrophobicity of FMPI.

• Journal of Internet Computing and Services
• /
• v.16 no.4
• /
• pp.39-50
• /
• 2015

In information retrieval process through search engine, some users want to retrieve several documents that are corresponding with specific time period situation. For example, if user wants to search a document that contains the situation before 'Japanese invasions of Korea era', he may use the keyword 'Japanese invasions of Korea' by using searching query. Then, search engine gives all of documents about 'Japanese invasions of Korea' disregarding time period in order. It makes user to do an additional work. In addition, a large percentage of cases which is related to historical documents have different time period between generation date of a document and record time of contents. If time period in document contents can be extracted, it may facilitate effective information for retrieval and various applications. Consequently, we pursue a research extracting time period of Joseon era's historical documents by using historic literature for Joseon era in order to deduct the time period corresponding with document content in this paper. We define historical objects based on historic literature that was collected from web and confirm a possibility of extracting time period of web document by machine learning techniques. In addition to the machine learning techniques, we propose and apply the similarity filtering based on the comparison between the historical objects. Finally, we'll evaluate the result of temporal indexing accuracy and improvement.

• Korean Journal of Food Science and Technology
• /
• v.35 no.6
• /
• pp.1104-1109
• /
• 2003

Response surface methodology (RSM) was used to investigate the effects of the processing parameters on supercritical $CO_2\;(SC-CO_2)$. extraction of total carotenoids and ${\beta}$-cyptoxanthin from Citrus unshiu press cake. The parameters tested were $SC-CO_2$ pressure, dynamic extraction time, and concentration of ethanol added as the modifier to $CO_2$. Experimental data correlated well with the processing parameters (p<0.01), and there was a high statistically significant multiple regression relationship for the extraction of total carotenoids and ${\beta}-cyrptoxanthin$ ($R^2=0.9789$ and 0.9796, respectively). The optimal processing conditions were extraction pressure 33.4 and 37.3 MPa, extraction time 39.6 and 41.0 min, ethanol concentration 18.6 and 17.0% for total carotenoids and ${\beta}-cryptozanthin$, respectively. Maximum extraction yields predicted by RSM were 61.1 and 95.8% ppm, respectively. The extraction yield of total carotenoids increased asymptotically with the increase of the extraction pressure. It increased in proportion to extraction time and concentration of the cosolvent. The extraction yield of ${\beta}-cryptoxanthin$ increased with extraction pressure, extraction time, and concentration of the cosolvent. The extraction time and the concentration of the cosolvent, and the interaction between extraction time and the concentration of the cosolvent significantly affected the extraction yields of carotenoids from C. unshiu press cake.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1021-1024
• /
• 2009

현재 사용되고 있는 통행시간 분류방법은 하나의 통행시간을 대푯값으로 가지고 있다. 이에 문제점은 고속도로 특성으로 규정 속도 이상의 속도로 주행하는 차량, 규정 속도 및 휴게소 이용차량, 운전자의 운전 습성, 통행 목적, 피로의 정도, 운전자 성향과 도로상황에 따라 통행시간이 다르게 나타나는 점이다. TCS(Toll Collection System) 자료는 고속도로의 다양한 특성이 포함되어 있으며, 대상 구간의 거리가 멀수록 목적지에 도달하는 통행시간의 분산이 커지는 특성 또한 보인다. 따라서 이를 처리하기 위한 효율적인 통행시간 분류, 구간대표통행시간 추출 알고리즘이 필요하다. 기존의 방법은 전체 통행차량의 통행시간을 감안한 방법으로 통행시간 예측시 정확성이 저하된다. 본 연구에서는 TCS 자료를 Fuzzy c-means 알고리즘을 이용하여 일일 고속도로 통행시간의 시간별 주행특성을 고려한 대푯 값을 추출하는 알고리즘을 제안하였다. 실제 서울-청주 구간을 운행한 TCS 자료를 가지고 실시한 실험으로, 주행특성 및 도로상황을 고려한 Fuzzy c-means를 이용한 통행시간 분류방법과 기존의 통행시간 분류 방법을 통한 통행시간을 PIFAB를 사용 TCS 자료의 실제 통행시간과 경로통행시간을 비교 평가하였다. 평가한 결과 본 연구에서 제안하는 Fuzzy c-means기법은 기존 방법인 MAD기법보다 75%, 신뢰구간(95%) 추출법 대비 81%의 정확성을 제고하였다.