• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.87-88
• /
• 2013

본 논문에서는 모듈형 멀티레벨 컨버터(Modular Multi-level Converter, MMC)의 제어기를 설계에 있어 시간 지연을 고려한 디지털 제어기 설계 방법을 제시한다. 제안된 방법으로 설계한 디지털 제어기를 사용하면 시간 지연으로 인한 시스템의 성능저하를 완화할 수 있으며, 11-Level로 구현된 MMC HVDC 시스템 모델에 적합한 디지털 제어기의 설계 방법에 관해 기술하고 제안한 방법의 타당성을 아날로그 제어기와의 성능비교를 Psim를 통해 검증하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12C
• /
• pp.199-207
• /
• 2001

We propose an adaptive shaping controller equipped with the technologies of shaping and buffering VoIP packets arriving at the receiving end by the CAM-type controller. In order to conceal interarrival packet delay variation, the conventional jitter buffers force them to be too large, thereby causing the audio quality to suffer excessive delay. However, by using our proposed method, the delay caused by shaping operation dynamically increases or decreases on the level of jitter that exists with in the IP network. This makes the delay accommodates adaptively the network jitter condition. The less jitter network has the fewer delay the shaping controller requires for jitter elimination. And the CAM-type method generally makes the shaping operation faster and leads to processing packets in as little time as can. We analyse the packet loss and delay performance dependency on the average talk ratio and the number of jitter buffer entries in shaping controller. Surprising, we show that the average delay using our shaping controller is about 70msec. This performance is much better than with the delay equalization method which forces the receiving end to delay about 60msec.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.3
• /
• pp.337-342
• /
• 2009

This paper concerns delay-range-dependent robust stability and stabilization for time-delay nonliner system via T-S fuzzy model approach. The time delay is assumed to be a time-varying continuous function belonging to a given range. On the basis of a novel Lyapunov-Krasovskii functional, which includes the information of the range, delay-range-dependent stability criteria are established in terms of linear matrix inequality. It is shown that the new criteria can provide less conservative results than some existing ones. Moreover, the stability criteria are also used to design the stabilizing state-feedback controllers. Numerical examples are given to demonstrate the applicability of the proposed approach.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.6
• /
• pp.689-694
• /
• 1998

본 논문에서는 상태와 제어입력에 시간지연을 가지는 이산 불확실성 시스템의 견실 H/sub ∞/ 상태궤환 제어기 설계문제를 다룬다. 동일한 제어기에 대해서, 파라미터 불확실성을 가지는 시간지연 시스템이 자승적 안정성(quadratic stability)과 폐루프 시스템의 H/sub ∞/ 노옴의 한계를 유지하면서 파라미터 불확실성이 없는 등가의 시스템으로 변형된다. 그리고 주어진 이산 불확실성 시간지연 시스템의 견실 H/sub ∞/ 상태궤환 제어기가 존재할 충분조건과 제어기 설계 알고리듬을 제시한다. 또한 변수치환과 Schur 여수(complement) 정리를 이용하면 구한 충분조건은 LMI(linear matrix inequality) 형태로 쓸 수 있다. 예제를 통하여 제시한 결과의 타당성을 보인다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.2
• /
• pp.52-60
• /
• 2009

This paper proposes a digital controller for a nonlinear multi-input/multi-output(MIMO) system with time-delayed input. A nonlinear system with multi-input time delay is discretized using Taylor's discretization method, and the discretized system can be converted into a general nonlinear system. Consequently, general nonlinear controller synthesis can be applied to the discretized time-delay system We adopted MAC controller synthesis and verified the performance of the proposed method by conducting computer simulations. The results of the simulation showed that the proposed controller synthesis performs well and the proposed method is useful for controlling a nonlinear time-delay system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.1
• /
• pp.23-29
• /
• 2016

This paper presents balancing control of a two-wheel mobile robot (TWMR). TWMR is aimed to maintain balance while moving. Although TWMR can be controlled by linear controllers such as PD controller, time-delayed controller is employed for robustness. Performances of PD controllers and time-delayed controllers are compared. Especially, experimental studies on different acceleration estimation for the time-delayed controller are conducted. Performances by different acceleration estimations of the balancing angle, of the position, and of both angle and position are compared empirically.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2185-2187
• /
• 2004

시간지연 상태추정 기법을 이용한 시간지연 관측기가 최근 제안되었다. 시간지연 관측기는 설계시 모델이 필요하지 않아 파라미터 변동 및 외란 등에 둔감하며 계산이 간단하여 실제 시스템으로의 적응이 용이하다. 본 논문에서는 시간지연 제어이론이 위치제어기로 적용된 유도무기용 BLOC 모터 구동시스템에서 속도센서를 사용하지 않는 시간지연 관측기의 설계내용을 기술하였다. 시간지연 관측기를 위한 최적의 고유치를 갖는 오차동력학 특성방정식을 선정하고 BLDC 모터 구동시스템에 대해 비선형 시뮬레이션을 수행하였으며 파라미터 변동에 대해 비교하였다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1501-1502
• /
• 2008

제어대상 시스템에 시간지연과 외란이 동시에 존재하는 경우, 스미스 예측기와 외란 관측기를 함께 사용하면 시간지연과 외란으로 인한 시스템의 성능저하를 완화할 수 있다. 하지만 시간지연이 유동적인 경우에는 설계된 스미스 예측기와 외란 관측기의 역할을 기대하기 어렵다. 본 논문은 시간지연을 갖는 2차 시스템 모델링 기법에 기반한 PID 제어기를 이용하여 시간 지연의 유동성에 대해 스미스 예측기와 외란 관측기의 강인성을 향상시키는 방법을 제안한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.2
• /
• pp.159-164
• /
• 2010

This paper focuses on the stability analysis and stabilization for networked control system with neutral type of time-delay. By utilizing the delay partitioning idea, new stability criteria are proposed in terms of linear matrix inequalities(LMIs). These conditions are developed based on the Lyapunov-Krasovskii functionals. Based on the derived criteria, a sufficient condition for te solvability of this problem is obtained in terms of linear matrix inequality without decomposing the original system matrices. Also, it is shown that the proposed controller design method is general for networked control systems. Finally, illustrative examples are presented to show the applicability of the proposed method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.15-19
• /
• 2005

The practical control problems for the lime-delay system is considered. The delay-free characteristics of the Smith Predictor is available only when both the process and it's model are exactly matched. So it does not used widely in practical industrial processes. In this paper, using the 2nd-order plus dead time model in place of the plant model of the Smith Predictor, the proposed controller shows the improved performance in case of the very long time delay. And the range of integral constant of the PI controller is also proposed.