• Korean Journal of Construction Engineering and Management
• /
• v.22 no.2
• /
• pp.12-20
• /
• 2021

Unsafe working environments slow down working speed in that it takes a lot of time to respond in case of an accident, greatly reducing the productivity of construction work. Therefore, proper safety management that does not impede the productivity of construction works is a very important factor for successful construction project. However especially in mega project, the mutual effects of safety management and productivity are complex. Therefore, this study establishes a causal model between safety management and productivity influencing factors based on effectiveness metrics, and analyzes the effect of increased site congestion due to excessive personnel input, irregular safety measures and inefficient change of work schedules. The result of this study, is expected to contribute to enhancing the competitiveness of the construction industry as the basis for establishing a safety management plan that can secure appropriate productivity.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.75-88
• /
• 2009

This paper presents a video quality assessment method based on quality degradation factors of real-time multimedia streaming services. The video quality degradation is caused by video source compression and network states. In this paper, we propose a blocky metric on an image domain to measure quality degradation by video compression. In this paper, the proposed boundary strength index for the blocky metric is defined by ratio of the variation of two pixel values adjacent to $8{\times}8$ block boundary and the average variation at several pixels adjacent to the two boundary pixels. On the other hand, unnatural image movement caused by network performance deterioration such as jitter and delay factors can be observed. In this paper, a temporal-Jerkiness measurement method is proposed by computing statistics of luminance differences between consecutive frames and play-time intervals between frames. The proposed final Perceptual Video Quality Metric (PVQM) is proposed by consolidating both blocking strength and temporal-jerkiness. To evaluate performance of the proposed algorithm, the accuracy of the proposed algorithm is compared with Difference of Mean Opinion Score (DMOS) based on human visual system.

• Journal of Korea Multimedia Society
• /
• v.15 no.5
• /
• pp.651-663
• /
• 2012

Networked digital signage downloads necessary multimedia contents from a large-sized storage on WAN to its local disk of a limited size before starting their playback. If the required time to download the entire contents gets longer, a start time to play the contents at the digital signage could be delayed. In this paper, we propose a hybrid storage architecture that not only inserts an iSCSI storage layer between the existing local disk and the WAN storage, but offers a contents caching scheme in order to obtain all the necessary contents in digital signage rapidly. The proposed caching scheme determines how to place the downloaded contents both in the local disk and the iSCSI storage. Uniquely, the proposed caching scheme manages the iSCSI storage space by dividing it into two regions: (1) in one region, the digital signage can play the contents directly without downloading them into the local disk; (2) in the other region, the digital signage cannot. Performance evaluations on a simulator and an actual system with workloads of various contents show that a contents-downloading time of the hybrid storage architecture is at maximum three times shorter than that of the existing storage architecture.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.1
• /
• pp.44-52
• /
• 2000

This paper is contented with packet transmission scheduling problem for repeating all-to-all broadcasts in WDM optical passive-star networks in which there are N nodes and k wavelengths. It is assumed that each node has one tunable transmitter and one fixed-tuned receiver, and each transmitter can tune to k different wavelengths. The tuning delay represents the time taken for a transmitter to tune from one wavelength to another and represented as ${\delta}$(>0) in units of packet durations. We define all-to-all broadcast as the one where every node transmits packets to all the other nodes except itself. So, there are in total N(N-1) packets to be transmitted for an all-to-all broadcast. The optimal transmission scheduling is to schedule In such a way that all packets can be transmitted within the minimum time. In this paper, we propose the condition for optimal transmission schedules and present an optimal transmission scheduling algorithm for arbitrary values of N, k, and ${\delta}$ The cycle length of the optimal schedules is $max{[\frac{N}{k}](M-1)$, $k{\delta}+N-1$}.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.3
• /
• pp.196-202
• /
• 2007

The performance characteristics of the polymer electrolyte fuel cells (PEFCS) were investigated under various humidification conditions at steady-state and transient conditions. The PEFC studied in this study was characterized by I-V curves in the potentiostatic mode and EIS (electrochemical impedance spectroscopy). The I-V curves representing steady-state performance were obtained from OCV to 0.25 V, and the dynamic performance responses were obtained at some voltages. The effects of anodic external humidification were measured by varying relative humidity of hydrogen from 20% to 100% while dry air was supplied in the cathode. At the high voltage region, the performance became higher with the increase of the temperature, while at the low voltage region, the performance decreased with the increase of temperature. The EIS showed that ohmic losses were larger at the dry condition of membrane and the effects of mass transport losses increased remarkably when the external and self-humidification were high. The dynamic responses were also monitored by changing the voltage of the PEFC instantly. As the temperature increased, the current reached steady-state earlier. The self-humidification with the generated water delayed the stabilization of the current except for low voltage conditions.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.5
• /
• pp.76-82
• /
• 1997

The paper describes simulations and experimental results using a measuring system which utilizes the acoustic holographic method in order to exactly estimate an absolute position of a sound source. The measuring surface is installed to satisfy with a far field to the sound source and is composed of linear arrayed seven microphones. A measurement is simultaneously recorded by a reference microphone setting up a neighbour sound source and the linear arrayed seven microphones which are moved to the same interval. An absolute position of sound source is estimated by the cross-spectrum method to the received sounds between a reference and the measuring microphones. Phase differences of each microphone and time delays during scanning are compensated to the reference microphone and the measuring time of the first column. An optimal interval for each microphone in the measuring surface is decided by a numerical simulation. A source signal makes use of a sinusoid, and S/N ratio is 30dB in the experiment. The optimal microphone's interval in the simulation and the experiment is decided in order to satisfy with the Nyquist space sampling condition related to the wave length of 2kHz sinusoid. Mainlobe width of a estimated 3D hologram in the case of 2kHz source signal is decreased to 87% and 30% in comparison to 500Hz and 1kHz, and then a valid of simulation results is confirmed. Therefore, we verified a utilization of the study for a sound source estimation using 3ㅇ acoustic holographic method.

• The KIPS Transactions:PartA
• /
• v.17A no.6
• /
• pp.265-274
• /
• 2010

As the process technology scales down and integration densities continue to increase, interconnection has become one of the most important factors in performance of recent multi-core processors. Recently, to reduce the delay due to interconnection, 3D architecture has been adopted in designing multi-core processors. In 3D multi-core processors, multiple cores are stacked vertically and each core on different layers are connected by direct vertical TSVs(through-silicon vias). Compared to 2D multi-core architecture, 3D multi-core architecture reduces wire length significantly, leading to decreased interconnection delay and lower power consumption. Despite the benefits mentioned above, 3D design technique cannot be practical without proper solutions for hotspots due to high temperature. In this paper, we propose three floorplan schemes for reducing the peak temperature in 3D multi-core processors. According to our simulation results, the proposed floorplan schemes are expected to mitigate the thermal problems of 3D multi-core processors efficiently, resulting in improved reliability. Moreover, processor performance improves by reducing the performance degradation due to DTM techniques. Power consumption also can be reduced by decreased temperature and reduced execution time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4C
• /
• pp.341-348
• /
• 2009

In this paper, we propose a grouping technique for the SDD(Synchronous Digital Duplexing) based on OFDMA(Orthogonal Frequency Division Multiple Access). The SDD has advantages of increasing data efficiency and flexibility of resource since SDD can transmit uplink signals and downlink signals simultaneously by using mutual time information and mutual channel information, obtained during mutual ranging process. However, the SDD has a disadvantage of requiring additional CS to maintain orthogonality of OFDMA symbols when the sum of mutual time difference and mutual channel length between AP(access point) and SS(subscriber station) or among SSs are larger than CP length. In order to minimize the length of CS for the case of requiring additional CS in SDD, we proposes a grouping technique which controls transmit timing and receive timing of AP and SS in a cell by classifying them into groups. Performances of the proposed grouping technique are evaluated by computer simulation.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.328-334
• /
• 2013

A greenhouse heating system to improve heat pump performance using inside and outside air of greenhouse as a heat source selectively and cut $CO_2$ enrichment costs by delay of greenhouse ventilation was developed. In this system, thermal storage modes divided into inside circulation mode using surplus solar energy and outside circulation mode using outside air heat. The thermal storage modes were designed to be switched mutually according to inside greenhouse temperature and six temperature values were input to control the heat pump operating, thermal storage mode switching and greenhouse heating automatically. Operating characteristics of this system were tested in a plastic greenhouse of non-ventilation condition. The results of test showed that the inside circulation mode began at about 11:00 and lasted for about 210 minutes and inside greenhouse temperature was maintained between $20{\sim}28^{\circ}C$ in spite of non-ventilation. System heating COP of the inside circulation mode in the daytime was 3.35, which was 36% and 25% higher than that of the outside circulation modes in the nighttime and daytime respectively.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.5
• /
• pp.485-495
• /
• 2000

The parallel computer system that uses parallel program on the application such as a large scale business or complex operation is required. One of crucial operation of parallel computer system is synchronization. A representative method of synchronization is barrier synchronization. A barrier forces all process to wait until all the process reach the barrier and then releases all of the processes. There are software schemes, hardware scheme, or combinations of these mechanism to achieve barrier synchronization which tends to use hardware scheme. Besides, barrier synchronization lets parallel computer system fast because it has fewer start-up overhead. In this paper, we propose a new switch module that can implement fast and fault-tolerant barrier synchronization in hardware scheme. A proposed barrier synchronization is operated not in full-switch-driven method but in processor-driven method. An effective barrier synchronization is executed with inexpensive hardware supports. Therefore, a new proposed hardware barrier synchronization is designed that it is operated in arbitrary network topology. In this paper, we only show comparison of barrier synchronization on Multistage Interconnection Network. This research results in 24.6-24.8% reduced average delay. Through this result, we can expect lower average delay in irregular network.