• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.175-181
• /
• 2002

BIS(Bus arrival Information System) is a system that informs Passengers waiting at bus stops of the bus arrival time of next buses. However, when operating this system, it is not exactly known what type of bus arrival information should be provided. The purpose of this paper is to develop a model of the optimal bus arrival time to be informed for BIS. Analyzing Efficiency in the Seoul's Urban Bus Industry Using Data Envelopment Analysis. Two basic types of bus arrival information can be considered. One is Bus Locations : Where next buses are located and under what situation they are, such as the next bus departed from the previous stop, The other is Expected Arrival Time. Time to the arrivals of next buses. Characteristics of these two types of bus arrival time information provided for passengers waiting at bus stops for BIS are examined. The waiting time of passengers at bus stops is derived as a function of the bus arrival time to be informed. Some basic principles about the optimal bus arrival time to be informed are found. Finally, a case study assuming several simplifications is performed. One of the key findings is that there exists optimal arrival time to be informed other than the average arrival time. The optimal arrival time to be informed should be closer to the average arrival time for small and very large standard deviations and be earlier for certain amounts of standard deviations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4B
• /
• pp.379-387
• /
• 2002

In this paper, we present a procedure to obtain the transient scattering response from three-dimensional arbitrarily shaped and closed conducting bodies using time-domain magnetic field integral equation (TD-MFIE) with triangular patch functions. This approach results in accurate and comparably stable transient responses from conducting scatterers. Detailed mathematical steps are included, and several numerical results are presented and compared with results from a time-domain electric field integral equation (TD-EFIE) and the inverse courier transform solution of the frequency domain results.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.70-77
• /
• 2012

Dial-a-ride is the most widely available transit service for disabled persons or seniors in the United States and Europe. This paper studies a static dial-a-ride problem considering multiple depots, heterogeneous vehicles, and soft time windows. In this paper, we apply a heuristic based on clustering first-routing second(HCR) to a real-world large dial-a-ride problem from Maryland Transit Administration(MTA). MTA's real operation is compared with the results of developed heuristic for 24 cases. The objective function of the proposed model is to minimize the total cost composed of the service provider's cost and the customers' inconvenience cost. For the comparison, the objective function values of HCR do not include waiting cost, delay cost, and excess ride cost. The objective function values from HCR are better than those from MTA's operation for all cases. This result shows that our heuristic method can make the real operation better and more efficient.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.2
• /
• pp.159-164
• /
• 2010

This paper focuses on the stability analysis and stabilization for networked control system with neutral type of time-delay. By utilizing the delay partitioning idea, new stability criteria are proposed in terms of linear matrix inequalities(LMIs). These conditions are developed based on the Lyapunov-Krasovskii functionals. Based on the derived criteria, a sufficient condition for te solvability of this problem is obtained in terms of linear matrix inequality without decomposing the original system matrices. Also, it is shown that the proposed controller design method is general for networked control systems. Finally, illustrative examples are presented to show the applicability of the proposed method.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.612-615
• /
• 2006

본 논문에서는 Late 암으로부터 측정된 상관 값을 보정하여 상관함수의 비대칭을 완화시키고 다중경로 신호 오차를 제거하는 새로운 상관기 설계법을 제안하였다. 다중경로 오차에 의한 신호 추적 오차는 상관함수의 Early-Late 간 비대칭과 관련이 있으므로, 다중상관기 구조를 이용하여 상관함수의 Early-Late간 상관값 차를 측정하면 상관함수의 비대칭 정도를 추정할 수 있다. 상관값 차를 이용하여 추정한 상관함수 비대칭을 감소시키면 다중경로 신호에 의한 코드 추적 오차를 줄일 수 있다. 제안한 상관기는 4개의 암과 보정치 생성 블록으로 구성된다. 제안한 상관기의 다중경로 오차 제거 성능은 시뮬레이션을 이용하여 확인하였다. 여러 가지 지연시간 및 신호 진폭을 가지는 다중경로 신호에 대하여 일반 수신기와의 위상 추적 오차를 비교하여 성능을 평가하였다. 시뮬레이션 결과에서 제안한 상관기는 우수한 다중경로 오차 제거 성능을 가지며 일반상관기와 유사한 평균 신호 획득시간을 가짐을 알 수 있다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.6
• /
• pp.102-107
• /
• 2008

We propose an autotuning algorithm for PI controller with unknown plant. The proposed algorithm uses a saturation function and time delay element as a test signal. Since the integral element of PI controller reduces a phase margin in the closed loop system, the closed loop system could be resulted in unstable with PI controller. To avoid unstable in the closed loop system with PI controller, the proposed algorithm identifies one point information in the 3rd quadrant of Nyquist plot with a time delay element. The proposed method improves an accuracy of one point identified information with one saturation function. We demonstrate a performance of the proposed method via a simulation.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.2
• /
• pp.46-56
• /
• 1999

A predictive controller is designed based upon stochastic methods for compensation time-delay effect on a system which has inherent time-delay caused by the spatial separation between controllers and actuators. The predictive controller estimates current outputs through linear prediction methods and probability functions utilizing previous outputs, and minimizes the malicious phenomena caused by the time-delay in precision control systems. To demonstrate effectiveness of this control methodology, we applied this algorithm for the control of a tele-operated DC servomotor. The experimental results show that this predictive controller is superior to the PID controller in terms of convergence-characteristics, and show that this controller expands the maximum allowable time-delay for a system maintaining the stability. Since the proposed predictor does not require models of plants - it requires only stochastic information for outputs --, it is a general scheme which can be applied for the control of systems which are difficult to model or the compensator of PID control.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.6
• /
• pp.15-22
• /
• 1992

i.i.d 신호의고차 모멘트와 스펙트럼의 성질에 대하여 4차까지 고찰하였으며 이의 결과를 이용하 여 2차 Volterra 급수로 표시되고, i.i.d. 입력 신호를 갖는 시불변 비선형 시스테므이 파라메타들을 추정 하는 알고리즘을 시간 영역과 주파수 영역에서 각각 제안하였다. 비록 2차 Volterra 급수가 i.i.d. 입력 신호에 대하여 orthogonal 모델이 아닐지라도 입력 신호의 각종 시간지연에 대한 모멘트나 역행렬의 계 산등이 요구되지 않으며 선형 전달함수와 2차 전달함수를 추정할 수 있는 알고리즘이 존재하는 것을 보 았다.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.3
• /
• pp.16-24
• /
• 1994

A single channel adaptive noise canceling (ANC) technique is presented for removing effects of additive noise on the speech signal. The conventional method obtains a reference signal using the pitch estimated on a frame basis from the input speech. The proposed method, however, gets the reference signal using the delay estimated recursively on a sample by sample basis. To estimate the delay, we derive recursion formula of autocorrelation function and average magnitude difference function. The performance of the proposed method is evaluated for the speech signals distorted by the additive white Gaussian noise. Experimental results with normalized least mean square (NLMS) adaptive algorithm demonstrate that the proposed method improves the perceived speech quality quite well besides the signal-to-noise ratio.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2262-2264
• /
• 2003

본 논문에서는 도선의 결함 유무와 결함 위치를 측정하는 방법으로 널리 사용되고 있는 시간 영역 반사파 처리 기법(Time Domain Reflectometry : TDR)의 성능 향상을 위하여 가우시안 형태를 가지는 입력 신호와 상호 상관 관계 함수를 이용한 신호 처리 방법을 제안한다. 일반적으로 TDR은 입력 신호와 반사 신호의 시간 지연을 측정해서 결함 위치를 측정하게 되므로, TDR 방법으로 결함 위치를 측정하는데 있어 시간축 분해능의 정도에 따라 측정 방법의 성능이 크게 좌우된다. 따라서, 본 논문에서는 제한된 시간축 분해능에서 결함 위치 측정의 정확도를 향상시키기 위해 가우시안 형태를 갖는 입력 신호 및 반사 신호와의 상호 상관관계 함수를 사용한다. 한편, 실제 도선에 적용하여 기존의 TDR 방법과 측정 성능을 비교 분석함으로써 본 논문에서 제안하는 방법의 우수성을 검증한다.