• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.457-463
• /
• 2015

A gas turbine engine plays an important role as a prime mover that is used in the marine transportation field as well as the space/aviation and power plant fields. However, it has a complicated structure and there is a time delay element in the combustion process. Therefore, an elaborate mathematical model needs to be developed to control a gas turbine engine. In this study, a modeling technique for a gas generator, a PLA actuator, and a metering valve, which are major components of a gas turbine engine, is explained. In addition, sub-models are obtained at several operating points in a steady state based on the trial running data of a gas turbine engine, and a method for controlling the engine speed is proposed by designing an NPID controller for each sub-model. The proposed NPID controller uses three kinds of gains that are implemented with a nonlinear function. The parameters of the NPID controller are tuned using real-coded genetic algorithms in terms of minimizing the objective function. The validity of the proposed method is examined by applying to a gas turbine engine and by conducting a simulation.

• Journal of Energy Engineering
• /
• v.8 no.4
• /
• pp.592-604
• /
• 1999

The steady state and dynamic characteristics of large cell area MCFC stacks were analyzed to solve the problems such as temperature difference generated in stacks and pressure difference between anode and cathode. Manipulated variables (current density, duel utilization rate, oxidant utilization rate) and controlled variables (temperature difference, anode and cathode pressure difference) which had an important effect on the MCFC stack performance were determined using operation results of two types of MCFC stacks (5kW (3,000 $\textrm{cm}^2$, 20 ea). 3kW (6,000 $\textrm{cm}^2$, 5ea)). The stability and transfer function representing system dynamics were obtained by steady state gain rate which showed the relative change between MVs and CVs. The transfer function was a 3$\times$3 matrix and a typical first order system without time delay. The optimal operating condition of large cell area MCFC stacks could be determined by analyzing dynamic characteristics. In case of a 5 kW MCFC stack, pressurized operation with recycle flow should be used to control the outlet temperature less than 68$0^{\circ}C$ and to control the MCFC system effectively. MIMO control or decoupler should be used to remove the interaction between MVs and CVs. This result will be used as important data in determining the control structure design and operation mode of large cell area MCFC systems in the future.

• The Journal of Society for e-Business Studies
• /
• v.12 no.3
• /
• pp.211-234
• /
• 2007

In e-business, XML is a major format of data and it is essential to efficiently process queries against XML data. XML query caching has received much attention for query performance improvement. In employing XML query caching, some efficient technique of cache replacement is required. The previous techniques considered as a replacement unit either the whole query result or the path in the query result. The former is simple to employ but it is not efficient whereas the latter is more efficient and yet the size difference among the potential victims is large, and thus, efficiency of caching would be limited. In this paper, we propose a new technique where the element in the query result is are placement unit to overcome the limitations of the previous techniques. The proposed technique could enhance the cache efficiency to a great extent because it would not pick a victim whose size is too large to store a new cached item, the variance in the size of victims would be small, and the unused space of the cache storage would be small. A technique of XML semantic cache replacement is presented which is based on the replacement function that takes into account cache hit ratio, last access time, fetch time, size of XML semantic region, size of element in XML semantic region, etc. We implemented a prototype XML semantic cache system that employs the proposed technique, and conducted a detailed set of experiments over a LAN environment. The experimental results showed that our proposed technique outperformed the previous ones.

• Journal of Bio-Environment Control
• /
• v.13 no.3
• /
• pp.135-142
• /
• 2004

The objective of this study was carried out to determine which method is effective for improving seed germination in carrot and onion among osmotic or solid matrix priming. Seeds were osmotic primed with -0.5 MPa polyethylene glycol 8000 (PEG) solution and solid matrix primed with Micro Cel E (seed, Micro Cel E, and water mixed with the ratio of 4.0：2.0：8.0 by weight for carrot, and the ratio of 4.0：1.2：5.0 for onion at $20^{\circ}C$ for 4 days). Seeds were rapidly absorbed water after osmotic priming and solid matrix priming treatment. The moisture content of solid matrix primed seeds was lower than that of osmotic primed seeds in carrot and onion. Osmotic priming and solid matrix priming did not influenced on increasing of percent germination, but $T_{50}$ of treated seeds was shorter than those of untreated seeds at four temperature regimes. The effects of osmotic or solid matrix priming in reducing the $T_{50}$ was greater when the seeds were germinated at $15^{\circ}C$ than at $25^{\circ}C$ and $30^{\circ}C$ temperature. Solid matrix primed seeds germinated faster than osmotic primed seeds at all temperature in both carrot and onion. After priming, surface-dried seeds germinated faster than dried-back seeds in carrot and onion. Emergence speed of carrot and onion seeds was faster than untreated seeds by osmotic priming or SMP treatment although the final emergence percentage was not significantly influenced. On the other hand, early growth was not significantly influenced by osmotic priming or SMP treatment of carrot and onion seeds.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.4
• /
• pp.329-333
• /
• 2005

To identify the effect of engineered barriers on the leach rate of cesium from spent PWR fuel under a synthetic granitic groundwater, the related leach tests with and without bentonite or metals have been performed up to about 6 years. The leach rates were decreased as a function of leaching time and then became a constant after a certain period. The period in a bare spent fuel was much longer than that with bentonite or metal sheets. The cumulative fraction of cesium released from the spent fuel with bentonite or with copper and stainless steel sheets was steadily increased, but the fraction from bare fuel was rapidly and then sluggishly increased. However, the values deducted its gap inventory from the cumulative fraction of cesium released from the bare fuel was almost very close to the others. These suggest that the initial release of cesium from bare fuel might be dependant on its gap inventory and the effect of engineered barriers on the long-term leach rate of cesium would be insignificant but the rate with engineered barriers could be reduced in the initial transient period due to their retardation effect. And the long-term leach rate of cesium from spent fuel in a repository would be approached to a constant rate of $2\times10^{-2}g/m^2-day$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.3
• /
• pp.131-135
• /
• 2004

This study was carried out for the analysis of temperature characteristics on soil surface using soil heat flux which is one of the important parameters forming soil temperature. Soil surface temperature was estimated by using the soil temperature measured at 10 cm soil depth and the soil heat flux measured by flux plate at 5 cm soil depth. There was time lag of two hours between soil temperature and soil heat flux. Temperature changes over time showed a positive correlation with soil heat flux. Soil surface temperature was estimated by the equation using variable separation method for soil surface temperature. Arithmetic mean using temperatures measured at soil surface and 10 cm depth, and soil temperature measured at 5 cm depth were compared for accuracy of the value. To validate the regression model through this comparison, F-validation was used. Usefulness of deductive regression model was admitted because intended F-value was smaller than 0.001 and the determination coefficient was 0.968. It can be concluded that the estimated surface soil temperatures obtained by variable separation method were almost equal to the measured surface soil temperature.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.2
• /
• pp.167-174
• /
• 2012

Purpose: The respiration is one of the most important factors in respiratory gating radiation therapy (RGRT). We have developed an unique respiratory guidance system using an audio-visual system in order to support and stabilize individual patient's respiration and evaluated the usefulness of this system. Materials and Methods: Seven patients received the RGRT at our clinic from June 2011 to April 2012. After breathing exercise with the audio-visual system, we measured their spontaneous respiration and their respiration with the audio-visual system respectively. With the measured data, we yielded standard deviations by the superficial contents of respiratory cycles and functions, and analyzed them to examine changes in their breathing before and after the therapy. Results: The PTP (peak to peak) of the standard deviations of the free breathing, the audio guidance system, and the respiratory guidance system were 0.343, 0.148, and 0.078 respectively. The respiratory cycles were 0.645, 0.345, and 0.171 respectively and the superficial contents of the respiratory functions were 2.591, 1.008, and 0.877 respectively. The average values of the differences in the standard deviations among the whole patients at the CT room and therapy room were 0.425 for the PTP, 1.566 for the respiratory cycles, and 3.671 for the respiratory superficial contents. As for the standard deviations before and after the application of the PTP respiratory guidance system, that of the PTP was 0.265, that of the respiratory cycles was 0.474, and that of the respiratory superficial contents. The results of t-test of the values before and after free breathing and the audio-visual guidance system showed that the P-value of the PTP was 0.035, that of the cycles 0.009, and that of the respiratory superficial contents 0.010. Conclusion: The respiratory control could be one of the most important factors in the RGRT which determines the success or failure of a treatment. We were able to get more stable breathing with the audio-visual respiratory guidance system than free breathing or breathing with auditory guidance alone. In particular, the above system was excellent at the reproduction of respiratory cycles in care units. Such a system enables to reduce time due to unstable breathing and to perform more precise and detailed treatment.

• Journal of the Korean Vacuum Society
• /
• v.21 no.5
• /
• pp.264-272
• /
• 2012

In this paper, we report THz generation and detection characteristics investigated by InGaAs semiconductor epilayers, as results of a basic study obtained from the InGaAs-based THz transmitter/receiver (Tx/Rx). High-temperature and low-temperature (LT) grown InGaAs epilayers were prepared by the molecular beam epitaxy technique for the characterization of THz generation and detection, respectively, and the surface emission based on the photo-Dember effect was tried for THz generation. THz wave was generated by irradiation of a Ti:Sapphire fs pulse laser (60 ps/83 MHz), and a LT-GaAs Rx was used for the THz detection. The frequency band shown in the spectral amplitudes Fourier-transformed from the measured current signals was ranging in 0.5~2 THz, and the signal currents were exponentially increased with the Tx beam power. The THz detection characteristics of LT-InGaAs were investigated by using an Rx with dipole (5/20 ${\mu}m$) antenna, and the cutoff frequency was ~2 THz.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.693-697
• /
• 2007

지하수 함양량을 산정하기 위해서 유역물수지 모형 또는 지하수위 변동곡선법등이 활용되어 왔으며, 각각의 장단점에 대한 많은 논의가 있었다. 지역내의 지하수 관리계획을 위해서는 유역물수지 모형이 적합한 반면, 실제(actual) 함양량의 정확성 문제가 있으며, 지하수위 변동곡선법은 실제 지하수의 증감을 통해 실제 함양변화를 잘 표현하는 반면, 그 영향권이 관측공에 의해 제한된다는 단점이 있다. 이와 같은 두 방법의 장점을 살리고 단점을 보완하기 위해 본 연구에서는 유역유출모의와 지하수위 변동을 동시에 고려하여 지하수 함양량을 추정하는 방안을 제시하였다. 수문학적 과정으로 함양을 분석하기 위해 준분포형 수문모형인 SWAT과 완전분포형 지하수 유동해석 모형인 MODFLOW의 결합모형을 이용한 유역단위 유출해석을 수행한다. 실제로 하천변에 위치한 관측공에서의 지하수위는 하천유출시계열과 유사한 양상을 보이며, 상류 경사지에 위치한 관측공의 지하수위는 토양수의 지체와 감수현상을 나타내므로 이같이 시간적으로 상이한 지체 양상을 반영하기 위해 모형내의 비포화대를 통과하는 함양의 거동을 기존의 단일 저수지 모형에서 다단 저수지 모형으로 개선하고 지체함수와 관련된 매개변수를 보정함으로써 모의 함양 시계열과 관측 지하수위 시계열간의 상관성 분석을 수행할 수 있다. 아울러 모의 및 관측 지하수위 분포의 비교를 통해 공간적인 지하수 분포에 대한 검증을 수행함으로써 함양량 산정 절차가 완성된다. 이같은 일련의 절차는 기존의 유역물수지 모형과 지하수위 변동법을 동시에 고려한 새로운 방식의 지하수 함양량 산정기법으로 제시할 수 있을 것이다.성빈맥(1예), 저심박출증(3예), 재수술이 필요했던 출혈(2예), 흉골 지연봉합(2예), 급성 신부전(2예), 폐렴(1예), 대동맥내 풍선펌프로 인한 혈전색전증(1예),수술 후 섬망(2예) 등이 있었다. 생존한 10명의 환자들 중 1명을 제외한 나머지 9명의 환자에서 $38{\pm}40$개월간의 추적관찰이 되었는데, 추적 관찰 기간 중에 3명이 사망하였고 생존한 6명의 환자는 모두 양호한 상태(NYHA 기능등급, $I{\sim}II$)를 보였으며, 그 중 3명에서는 혈역학적으로 큰 의미가 없는 잔여단락이 있었다. 결론: 급성 심근경색증 후 심실중격 결손은 수술위험도가 높은 질환이지만, 수술 전 대동맥내 풍선펌프를 삽입하고 조기에 심실중격 결손부의 infarct exclusion 술식과 함께 관상동맥우회술을 시행함으로써 만족할 만한 수술 및 중기 결과를 얻을 수 있었다.출물 투여로 저하되었으나 NC군보다는 높게 나타났다. 간 중 중성지질 함량은 참나물 에탄올 추출물 투여 용량에 따른 유의차가 없었으나, 총콜레스테롤 함량은 고용량 병합투여한 HC-PBH군만 유의하게 저하되었다. 혈청 및 간 중의 지질 함량 변화는 정상식이를 급여한 NC군과 NC-PB군 간에는 유의차가 없었다. 따라서 고콜레스테롤식이를 급여하면서 참나물 에탄올 추출물을 병합투여 시에만 지질대사 개선 효과가 있는 것으로 여겨지며, 고용량 병합투여 시 효능이 더 큰 것으로 나타났다. 고콜레스테롤식이로 인한 산화적 스트레스가 고콜레스테롤혈증을 유발하였으며, 이는 참나물 에탄올 추출물에 함유된 항산화물질을 포함한 여러 생리활성물질

• Journal of KIISE:Information Networking
• /
• v.32 no.3
• /
• pp.391-403
• /
• 2005

Several nv6 mobility support protocols for mobile Internet services are proposed in IETP : Mobile Ipv6, Hierarchical Mobile Ipv6, and Fast Handovers over Mobile Ipv6. Recently, IEEE 802.11 network has also been widely deployed in public areas for mobile Internet services. In the near future, IPv6 mobility support over IEEE 802.11 network is expected to be a key function to actualize the All If-based mobile various services. For appropriate application of these protocols, the IPv6 mobility support protocols should be analyzed according to their characteristics in terms of signaling, handover latency, lost packets, and required buffer sire as well as the impact of lower layer such as IEEE 802.11 network. In this paper, we analyze the performance of the protocols over IEEE 802.11 network. We define a packet-level traffic model, a network system model, and a mobility model. From these models, we construct a framework for the performance analysis. We also make cost functions to formalize each protocol's performance. Lastly, we analyze the effect of varying parameters used to show diverse numerical results, and compare with each other. From the analysis results, it is concluded that each Protocol has contrary or contrastive advantages with other Protocols, so there is no protocol that holds a dominant position.