• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.12
• /
• pp.28-33
• /
• 2007

We present a space-time trellis coded OFDM system in flow fading channels. Generalized principal ratio combining (GPRC) is also analyzed theoretically in frequency domain. The analysis show that the decoding metric of GPRC include the metrics of maximum likelihood (ML) and PRC. The computer simulations with M-PSK modulation are obtained in frequency flat and frequency selective lading channels. The decoding complexity and simulation running times are also evaluated among the decoding schemes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.217-225
• /
• 2003

In this paper, in order to investigate the near field distribution characteristic of the Loop Antenna we simulated and measured the near field of a Loop Antenna using optical electric-field sensor in a large Chamber(8.5 m x 7 m x 7 m). The simulation methods were used MoM for frequency domain and FDTD for time domain. From the analysis results, it can be seen that the simulation and measurement results are very aggregated, and the optical electric-field sensor is a certificate of validity. In frequency domain, in case of the optical sensor with vertical polarization is located above the near vertical line of the Loop Antenna the signal strength level is more 15 ㏈ than with horizontal polarization. But in case of the optical sensor located above horizontal line of the Loop Antenna, signal strength level is not different. And, in the time domain, although input signal is positive, in the case of the optical sensor with vertical polarization is located above horizontal line of the Loop Antenna, it can be seen that the received pulse shape is negative.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.956-964
• /
• 2017

This study contributes to deepening understand of the characteristics of fishing vessel rolling motions to improve the development of capsizing alarm systems. A time domain rolling motion simulation was performed. In order to verify capsizing alarm systems, it is necessary to carry out experiments assuming a capsizing situation and perform actual fishing vessel measurements, but these tasks are impossible due to the danger of such a situation. However, in many capsizing accidents, a close connection with rolling motion was found. Accordingly, the rolling motion of a fishing boat, which is the core of a fishing vessel capsizing alarm system, has been accurately measured and a time domain based on a rolling motion simulation has been performed. This information was used to verify the algorithm for a capsizing alarm system. Firstly, the characteristics of rolling motion were measured through a motion experiment. For small vessels such as fishing vessels, it was difficult to interpret viscosity due to analytical methods including CFD and potential codes. Therefore, an experiment was carried out focusing on rolling motion and a rolling mode RAO was derived.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.10a
• /
• pp.254-262
• /
• 1999

실시간 시뮬레이션에서 주어지는 다양한 종류의 불연속적인 파라미터 값을 가지는 데이터 테이블에서 실시간의 제약 하에서의 검색을 수행하기 위해서는 최적의 기법이 요구된다. 실시간의 제약 하에서 최적 기법의 기준이 되는 것은 보통의 알고리즘들과는 달리 평균 속도가 아니라 worst case에서의 속도가 된다. 검색 알고리즘 들은 iteration을 거치게 되므로 총 탐색에 걸리는 시간은 iteration의 수(logical speed)와 1 probe를 수행하는 데 걸리는 시간(실제 수행속도)의 곱으로 정의된다. 본 연구에서 총 탐색에 걸리는 시간을 이론적으로 계산한 검색 속도 기존의 수행한 수치비교시험의 결과와 대체로 일치하였고, 이분 검색법이 iteration의 수와 실제 수행시간 모두에 있어서 가장 우수하다. 한편, 검색하고자 하는 파라미터 값의 dynamics를 이용하여 주어진 데이터 테이블 내의 검색 영역을 축소시키는 dynamic-window 개념을 도입하여 검색 알고리즘의 속도를 향상시킬 수 있었다. 이 개념의 도입은 데이터 테이블의 형태에 민감한 보간 검색법(interpolation method)과 그 응용 기법들에 대해 탁월한 효과를 나타내었다. 결론적으로 일반적 데이터 테이블에 있어서는 이분 검색법이 logical speed와 실제 수행속도가 우수하고, dynamic-window 개념을 도입한 보간 검색법과 그 변형들은 logical speed가 탁월하게 향상된다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.9
• /
• pp.1847-1853
• /
• 2011

Analysis of an indoor propagation channel has conventionally used the ray-tracing method. But, in this paper, we had modelling the channel for three dimensional indoor structure by the finite difference time domain method for three dimensional full wave analysis. An excitation signal of the FDTD method used plane wave. The plane wave was excited using the total field/scattered field method. And absorbing boundary condition used the perfectly matched layer method with 7 layers. An living room for the simulation of indoor channel modeling is surrounded the wall that be composed of the wood, the conductor, the glass and concrete. When there are furniture in the living room or not, it were simulated, respectively. As simulation results, we could identify the fading effect of multipath at indoor propagation environment, calculated mean excess delay and rms delay spread for the receiver design.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.4 s.334
• /
• pp.45-52
• /
• 2005

This paper presents the characterization of through hole vias on printed circuit board (PCB) through the time domain and frequency domain measurements. The time domain measurement was performed on a single via using the TDR, and the model parameters were extracted by the fitting simulation using HSPICE. The frequency domain measurement was also performed by using 2 port VNA, and the model parameters were extracted by fitting simulation with ADS. Using the ABCD matrices, the do-embedding equations were derived probing in the same plane in the VNA measurement. Based on the single via characterization, the differential via characterization was also performed by using TDR measurements. The time domain measurements were performed by using the odd mode and even mode sources in TDR module, and the Parameter values were extracted by fitting with HSPICE. Comparing measurements with simulations, the maximum calculated differences were $14\%$ for single vias and $17\%$ for differential vias.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.5A
• /
• pp.836-845
• /
• 2001

본 논문에서는 시간 선택성 다중경로 이동 무선 채널을 다양한 방법으로 모델링 하고 그에 따른 여러 가지 특성평가를 제시하였다. 모델링 방법에는 Jakes 방식과 시간 영역에서 독립적인 두 개의 가우시안 잡음 발생기와 정형필터(shaping filter)를 사용하는 방식 및 주파수 영역에서 필터링 하는 방식이 있다. 이 세 가지 모델링 방법의 성능을 진폭의 자기상관함수, 상호상관함수, 누적분포함수(Cumulative Distribution Function), 레벨 교차율(Level Crossing Rate), 평균 페이딩 지속 시간(Average Duration of Fades), 위상차의 확률 밀도, 위상차의 자기상관함수 등의 측면에서 시뮬레이션하고 그 결과치와 이론치 간의 특성 비교를 제시하였다. 특히, 확산 대역 시스템을 고려했을 때 이상적인 채널 추정을 가정한 레이크 수신기에서의 BER 성능을 다중경로 개수에 따라 보임으로써 여러 가지 채널 모델링 중에서 주파수 영역에서 필터링 하는 방식이 이동 무선 채널을 모델링 하는데 있어 가장 적합하다는 것을 보였다. 마지막으로 비대칭 도플러(Doppler) 스펙트럼을 모델링 하는 것도 주파수 영역에서 필터링 하는 방식이 편리하다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2004.05a
• /
• pp.179-182
• /
• 2004

무선통신분야에서 LMS5(Least Mean Square) 알고리즘은 식이 간단하고 계산량이 비교적 적기 때문에 널리 사용되고 있다. 그러나 시간영역에서 처리할 경우 입력신호의 고유치 변동폭이 넓게 분포되어 수렴속도가 저하하는 문제점이 있다. 이를 해결하기 위하여 신호를 FFT(Fast Fourier Trasnform)나 DCT(Discrete Cosine Transform)로 변환하여 신호간의 상관도를 제거함으로써 시간영역에서 LMS알고리즘을 적용할 때 보다 수렴속도를 크게 향강시킬 수 있다. 본 논문에서는 수렴속도 향상을 위해 시간영역의 적응 알고리즘을 직교변환인 고속웨이브렛(wavelet)변환을 이용하여 변환영역에서 수행하며, 짧은 필터계수를 가지는 DWT(Discrete Wavelet Transform)특성에 맞는 Fast running FIR 알고리즘을 이용하여 WTLMS(Wavelet Transform LMS)적응알고리즘을 통신시스템에 적용한다. 적응 알고리즘의 성능향상을 위하여 시간에 따라 적응상수의 크기를 가변시켜 수렴 초기에는 큰 적응상수로 따른 수렴이 가능하도록 하고 점차 적응상수의 크기를 줄여서 misadjustment도 줄이는 방법의 적응 알고리즘을 제안하였다. 제안한 알고리즘을 실제로 적응잡음제거기(adaptive noise canceler)에 적용하여 컴퓨터 시뮬레이션을 하였으며, 각 알고리즘들의 계산량, 수렴속도를 이용하여 각각 비교, 분서하여 그 성능이 우수함을 입증하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4C
• /
• pp.418-424
• /
• 2007

This paper proposes a scheme to track channel response in OFDM systems with null sub-carriers. The proposed channel tracking scheme estimates the channel response first in the frequency domain by using the decision directed data. The time domain channel estimation is then performed to remove additive white Gaussian noise (AWGN) components further. Due to the channel estimation in the frequency domain, no inverse matrix calculation is required in the time domain channel estimation. Computational reduction in the proposed method is about 93%, compared with the conventional time domain channel estimation method. Mean square error (MSE) and bit error rate (BER) performances are evaluated by using computer simulation. The proposed method shows the same performance as that of the conventional time domain channel estimation even though the significant computational reduction.

• Journal of the Korea Society for Simulation
• /
• v.32 no.4
• /
• pp.11-18
• /
• 2023

This study analyzes the effect of a handshake location of an AS/RS with twin cranes for mixed-model production line at an automobile plant. Implementing a handshake operation has the advantage for preventing route interference between twin cranes that operate without crossing into each other's working areas. However the handshake operation requires additional unloading and loading processes to retrieve assembly parts beyond the handshake area. Therefore the decision regarding the handshake location is crucial to improve efficiency of storage and retrieval operations. Simulation results show that the handshake operation with the optimal handshake location reduces the average response time of storage requests to 87% compared to non-handshake operation.