• Journal of Korean Society of Transportation
• /
• v.22 no.1 s.72
• /
• pp.33-42
• /
• 2004

지하철역별 수요는 개통 후 경과 연도에 따라서 S자 형태로 증가한다. 즉 개통 초기에는 잠재되어 있던 지하철 수요가 시간의 경과에 따라 계속적으로 증가하다가, 개통 후 10$\sim$13년 정도가 경과하면 최대를 나타낸 후 거의 정체하는 현상을 보인다. 그러나 지금까지 지하철 수요를 추정하기 위해서 이용되었던 4단계 모형은 이러한 지하철 수요의 증가 추세를 반영할 수 없기 때문에 실제 수요와 많은 차이를 보였다. 따라서 본 연구에서는 이러한 문제를 해결해 보고자 서울시 지하철 2$\sim$8호선의 실제 수요를 토대로 지하철역별 수요, 특히 순수한 승차인원을 추정하는 모형을 개발하였다. 모형에 적용되는 함수식은 실제 지하철역별 수요와 가장 유사한 형태를 보이고 있는 로지스틱 함수식을 이용하였다. 또한 각각의 지하철역별로 나타나는 상이한 특성은 카테고리로 분류하여 모형에 반영하였다. 카테고리는 토지이용도, 사회경제활동의 규모, 그리고 지하철역의 특성에 따라 분류하였다. 각 카테고리별 특성을 대표하는 독립 변수로 인구 종사자수, 학생수와 개통 후 경과 연도 등을 선정하였다. 그 결과 카테고리별로 추정된 지하철역별 수요는 통계적으로 매우 유의한 것으로 나타났다. 본 연구는 지하철역별로 승차하는 순수한 수요를 보다 정확하게 추정하기 위한 모형을 개발하는 것이 주된 목적이다. 반면에 본 모형을 이용하여 지하철역별 하차 수요 및 횐승 수요를 추정하는 것은 어렵다. 따라서 기존에 지하철 수요를 추정하는 데에 가장 많이 사용된 4단계 모형과 접목하여야 하며, 이에 대한 방안도 본 연구에서 제시하였다.

• Journal of the KSME
• /
• v.36 no.9
• /
• pp.855-866
• /
• 1996

승요차 앞자축에 장착되어 회전하면서 동력을 전달하는 드라이브축은 운행중에 주로 비틀림하중을 받는다. 따라서 동 부품의 피로해석 및 설계를 위해서는 실제 운행중에 받는 서비스토크의 크기, 주파수 등에 관한 데이터가 필요하다. 차량에 탑재된 엔진의 토크와 회전수 등의 규격으로부터 드라이브축에 부가되는 최대 토크 값을 예측할 수 있으나, 자동차 운행주에는 승차인원, 도로조건, 운전자의 운전습관 등 여러가지 외적인 영향으로 인하여 서비스토크가 불규칙하게 변할 것으로 예상되므로 서비스토크를 정확히 예측하기는 어려운 실정이다. 또한, 최근의 자동차 구조부품에 대한 설계개념이 무한수명 설계에서 경량화 설계로 변화되고 있으며, 따라서 자동차 드라이브축도 실제 운용하중을 바탕으로 한 정확한 수명예측 및 강도설계가 요구되고 있다. 본 연구에서는 4륜구동형 승용차용 드라이브축에 대해 실제 운용하중에서의 피로수명을 예측하기 위해 1)텔리메트리를 이용하여 토크를 측정하고, 2) 일정진촉하중하에서의 드라이브축의 비틀림 피로시험을 수행하고, 3) 일정진폭하중하에서의 드라이브축의 비틀림 피로시험을 수행하고, 4) 축류 소재의 피로특성 데이터를 구성하여 5) 자체 개발한 프로그램으로 피로수명을 예측하고자 한다.

• 한국가스학회:학술대회논문집
• /
• 2006.11a
• /
• pp.129-137
• /
• 2006

• Journal of the Korean Society for Railway
• /
• v.16 no.2
• /
• pp.144-150
• /
• 2013

This paper presents an analysis of door design for the Ui LRT based on experiments to predict doorway flow-time and their analyses results. A similar railway vehicle (from Gimhae LRT) and operational conditions are utilized to assess the doorway flow-time through repetitive experiments. Design of the experiments consists of four scenarios, and the experiments are repeated 39 times in total. We use the results of the experiments to verify the design of doors of Ui LRT (e.g. the required number of doors and their width). Various statistical analyses are carried out for the flow-time with respect to the number of boarding/alighting passengers. We make three category levels of boarding/alighting passengers, and analyze the mean and variance for each category, and then carry out One-Way ANOVA to analyze how the number of boarding/alighting and onboard passengers impact flow-time. The results of this paper can be used for making decisions about doors of the LRT vehicle.

• Annual Conference of KIPS
• /
• 2023.11a
• /
• pp.530-533
• /
• 2023

대중교통은 현대 사회에서 필수적인 요소이며 특히 출퇴근 시간대에는 도로 교통 상황에 영향을 덜 받는 지하철의 수요가 높은 편이다. 그러나 제한된 물리적 자원으로 인해 열차 내 혼잡도 증가와 열차 운행 지연은 불가피한 상황이다. 본 논문에서는 이를 해결하기 위한 한 가지 방법으로 강화학습기반 DQN 알고리즘을 이용한 열차 정차 시간 최적화 기법을 제안했다. 열차 정차 시간과 승차 인원 모두 고려하면서 최적화를 진행했을 때와 그렇지 않았을 때를 비교하면서 실험을 진행하여 성능을 분석했다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.3
• /
• pp.363-370
• /
• 2023

Due to the spread of COVID-19, the use of public transportation such as urban railroads has changed significantly since the beginning of 2020. Therefore, in this study, daily time series data for each urban railway station were collected for three years before COVID-19 and after the spread of COVID-19, and the similarity of time series analysis was evaluated through DTW (Dynamic Time Warping) distance method to derive regression centers for each cluster, and the effect of various external events such as COVID-19 on changes in the number of users was diagnosed as a time series impact detection function. In addition, the characteristics of use by cluster of urban railway stations were analyzed, and the change in passenger volume due to external shocks was identified. The purpose was to review measures for the maintenance and recovery of usage in the event of re-proliferation of COVID-19.

• Spatial Information Research
• /
• v.19 no.4
• /
• pp.11-20
• /
• 2011

In accordance with low carbon and green growth paradigm, a subway is one of major public transit systems for resolving traffic congestion and decreasing traffic accidents. In addition, as subway networks expand, passengers' travel pattern in the subway network change and consequently affect the urban structure. Generally, new subway route has been planned and developed, mainly considering a travel demand forecast. However, it is desired to conduct an empirical analysis on the forecast model regarding change of travel accessibility and passenger demand pattern according to new subway line. Therefore, in this paper, an alternative method, developed based upon a spatial syntax model, is proposed for evaluating new subway route in terms of passenger's mobility and network accessibility. In a case study, we constructed subway network data, mainly targeting the no 9 subway line opened in 2009. With an axial-map analysis, we calculated spatial characteristics to describe topological movement interface. We then analyzed actual modal shift and change on demand of passengers through the number of subway passenger between subway stations and the number of passenger according to comparative bus line from Smart Card to validate suggested methods. Results show that the proposed method provides quantitative means of visualizing passenger flow in subway route planning and of analyzing the time-space characteristics of network. Also, it is expected that the proposed method can be utilized for predicting a passengers' pattern and its impact on public transportation.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.262-269
• /
• 2016

Subway station scales are determined by peak predictions. In this study, the purpose behind the installation of a subway is public transportation convenience and public interest, but economic validity is also important. By proving that the scale of the station is excessive with regard to the target station size for Seoul subway Line 5-8, a reasonable plan. can be sought. According to station installation standards, the area of the station under investigation here is out of the service levels by six stages (A~F), and it must be four or more levels (D). The Actual level for the B level is a two-step design. The Actual ratio for over- Peak predictions is only 17.8% on average. The results of measurements of the excess area and determination of the excessive costs were analyzed by subdividing the area and by calculating it based on the B level, finding that it is possible to provide benefits for customers only in the current design, with an area ratio of 16.3%. Given the weight, it was estimated that current conditions can meet the needs of only 18.6% of the current area. Simplifying the scale calculation method of the station, it is convenient, safe, and advantageous to move citizens only if the scale can be streamlined. Then, with a reduced initial investment, maintenance costs during the operation can be reduced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.74-79
• /
• 2016

The Seoul Metropolitan Subway, which started operating in 1974, plays a major role in transporting 7,289 thousands passengers daily. This trend of a steadily increase in passengers from 2012 has increased the congestion rate because of the limited capacity and time. To solve this problem, Seoul city is consistently working on improving the subway facilities, such as the construction of a detour path. This project, however, has only a slight effect on improving the congestion rate and is too expensive to construct the facilities. Hence, this study suggests The Congestion Standardization System based on the IoT for improving the subway congestion rate. Based on the system, the expected effect analysis was performed, which resulted in a decrease in ride passengers from 34 to 20. In addition, this expected effect analysis shows that the number of subway vehicles can increase from 20 to 24. The suggested system will have a significant effect on the efficiency of the management system.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.175-186
• /
• 2006

In the 21C, each nation controls exhaust fumes from automobiles and makes an effort to develop alternative energy because of serious environmental problem. Jechon area has many historical and cultural archeological sites. And Jechon city sponsors various cultural events. But the way of transportation which is connected with Jecheon and around sightseeing places is general and not ready yet. Therefore, if a special means of vehicle is developed, it could play an another role of sightseeing resources. Special identity of Jecheon area for establishment of green vehicle traffic system which gives Jecheon area specific character was investigated for theoretical background. Traffic system was studied for establishment of direction through existent successful case study. Moreover content, method, structure and advantage & shortcoming etc. of vehicle that use green energy resource such as solar car, fuel cell car, hybrid car, natural gas car etc. were examined. The suitable means of vehicle for Jechon area was proposed to three directions with research and investigation. After comparison and investigation by inquiry of each section's experts, the most suitable traffic system of which energy resource of car, form of vehicles, the complement, dimension of vehicles etc. were decided. Design proposal should be drawn according to process of automobile design in decided direction. Special Exterior design of vehicle that use green energy resource connecting Jecheon and around area should be suggested in Jecheon City Hall and Chungchong-bukdo provincial office for vivify image of cleanliness area.