• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.66-72
• /
• 2019

To improve ride quality and running stability of high speed train(HST), it is important that connection between coaches adopts the articulated bogies by using a gangway ring, unlike the conventional independent bogies assembled with car bodies. Although the gangway ring should be ensured absolute safety against passenger movement between coaches during train operation, there is still a lack of quantitative durability criteria of that. Therefore, in order to improve the passenger safety of HST, it is important to study the test requirements on durability evaluation for the ring. In this study, seven mixed loading cases were derived from the triaxial loading(vertical/lateral/longitudinal) modes. The safety factor of each component is at least 2.4 or more from the results of the finite element analysis. In addition, fatigue safety was evaluated through durability analysis from the viewpoint of strain-life design. Durability tests for the gangway ring carried out a total of 10 million cycles in 4 phases load conditions. After the durability test, the defect of each component was investigated using nondestructive testing techniques.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1187-1191
• /
• 2011

In this paper, the development of an adjustable load limiter is presented, which is a component of the seat belt. The adjustable load limiter is loaded at different levels for varied weights and heights of occupant. The recent regulation FMVSS 208 demands strict safety standards for different percentiles of dummy size. In this work, high- and low-level load conditions are proposed according to dummy scale and thoracic injury criteria. The suggested load conditions were verified by performing a sled test using the benchmark model. A dual-level load limiter has been developed on the basis of these tests. Experiments were conducted on the product performance, and finite element analysis was carried out; the results confirmed the points for improvement.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.4
• /
• pp.6-15
• /
• 2019

Since introducing the offset frontal impact test in EuroNCAP in 1997, the vehicle has been constantly changing according to its usage and purpose. As of 2019, many vehicles have been released to the public, which has led to a large structural mass difference between small, medium and large vehicles. Also, the geometry of the front of the vehicle is completely different for each vehicle and tends not to be perfectly aligned at frontal collisions. The difference in mass of each of these vehicles and less performing structures for offset crashes have led to dramatically worse outcome in a car to car offset frontal impact tests. Even though a decade later passenger cars have become much safer due to consumer test programs and regulatory requirements, the aggressiveness and compatibility that can cause damage to the opponent car in the event of car to car collision is not considered in the above-mentioned section, and therefore much improvement is needed. After many years of study to solve this problem, EuroNCAP has developed a new mode MPDB offset front test that considers the aggressiveness and compatibility that can affect the opponent cars that have collided. This paper introduces the development process of aggressiveness and compatibility evaluation method of MPDB in EuroNCAP which will be implemented from 2020. Several impact tests have been conducted at different test conditions to rate the vehicle structure performance only focused on aggressiveness and compatibility of MPDB.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.345-353
• /
• 2020

On conventional railway lines, trains with different speeds are operated. Therefore, trains moving on curved sections with cants must accept various ranges of balanced cants, cant deficiency, and cant excess, which is essential for the comfort and safety of train operation. In this study, the correlation between the curve radius, cant, and train speed on a track was analyzed to check the cant range that satisfies the criteria of train types, operation speed, cant deficiency, and cant excess. Also, the range of setting the cant by the curve radius and balanced cant were calculated by a regression analysis of train speed according to the frequency of operation in the case of mixed trains. The results could make it possible to improve the speed of the operation route, reduce the loss of ride quality, reduce the risk of derailing caused by cant deficiency, and minimize the load deflection by excess cant. This will ensure the safety of trains running on curves and improve the efficiency of track maintenance.