• Journal of Mushroom
• /
• v.9 no.1
• /
• pp.34-38
• /
• 2011

In this study, temperature and relative humidity during growth of fruit body were applied to oyster mushroom (Pleurotus ostrestus) to elucidate the prolongation effect of storage. Although there were not big differences among conditions of cultivation, weight loss and change of pileus color were slight increased and hardness and springness of fruit body were little decreased with storage period. When whole mushrooms (250~300g) were packaged with wrap and stored at $4{\pm}1^{\circ}C$, the shelf life of the oyster mushrooms were cultivated at $16^{\circ}C$ and at $13^{\circ}C$ was 18 day and 24days, respectively. Therefore, it was elucidated that the treatment of low-temperature at the step of fruit body development affected extension of shelf life in oyster mushroom.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.12
• /
• pp.70-78
• /
• 2000

A novel capacitance deviation-to-time interval converter based on ramp-integration is presented. It consists of two current mirrors, two schmitt triggers, and control digital circuits by the upper and lower sides, symmetrically. Total circuit has been with discrete components. The results show that the proposed converter has a linearity error of less than 1% at the time interval(pulse width) over a capacitance deviation from 295 pF to 375 pF. A capacitance deviation of 40pF and time interval of 0.2 ms was measured for sensor capacitance of 335 pF. Therefore, the high-resolution can be known by counting the fast and stable clock pulses gated into a counter for time interval. The application of a novel capacitance deviation-to time interval converter to a digital humidity controller is also presented. The presented circuit is insensitive to the capacitance difference in disregard of voltage source or temperature deviation. Besides the accuracy, it features the small MOS device count integrable onto a small chip area. The circuit is thus particularly suitable for the on-chip interface.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.134-134
• /
• 2003

SnO$_2$를 모물질로 하는 가스센서는 n형 산화물 반도체로서 공기중의 산소의 흡탈착 및 전자의 수수에 의해 전기전도도의 변화로 특정 가스를 감지한다. 지금까지 반도체식 가스센서의 모물질로 가장 많이 연구되어 왔지만 아직도 선택성, 안정성 등 여러 가지 문제를 안고 있다. 그리고 개선방안으로 귀금속 촉매의 첨가 및 입자의 크기의 조절 등이 흔히 연구되어 왔다. 따라서 본 연구에서는 순수한 SnO$_2$ 를 이용하여 소결 온도 및 입자 크기에 의한 영향을 CO가스 및 수분에 대한 감도, 반응 시간을 통해 알아보았다. 수열 합성 및 침전 법으로 나노 크기의 SnO$_2$ 분말을 합성하여 스크린 인쇄법으로 후막 가스센서를 제조하였다 침전법에서 SnCl$_4$에 암모니아수로 pH=10.5로 적정하여 SnO$_2$ 분말을 얻었다. 그리고 입자 크기를 조절하기 위해 수열 합성 시 autoclave 내의 수열처리 온도를 100, 150, 20$0^{\circ}C$로 조절하여 SnO$_2$ 분말을 제조하고 입자 크기와 성분분석을 위해 XRD, SEM, TEM, BET 측정을 하였다. 그 결과 침전법으로 제조한 입자의 크기는 20nm 정도였으며 수열 처리한 SnO$_2$ 입자는 10nm이하의 미세한 입자를 얻을 수 있었다. 수열 합성 시 온도가 높아질수록 더 작은 입자 크기를 얻을 수 있었고 600, 7()0, 80$0^{\circ}C$ 열처리 후 입자성장이 침전법에 의한 SnO$_2$ 분말보다 더 작게 일어났다. 이렇게 제조한 나노크기의 SnO$_2$ 분말을 이용하여 습도 및 CO 가스에 대한 그 특실을 평가하였다. CO 20ppm에 대하여 40%정도의 감도를 보였으며 입자가 작아질수록 높은 감도를 보이는 것을 확인 할 수 있었다. 반면 CO 가스와 반응 후 회복 시 입자 의기가 작아질수록 회복이 늦어짐을 알 수 있었다. 그리고 15$0^{\circ}C$에서 습도에 대한 반응 후 회복시간을 조사해보니 같은 결과를 얻을 수 있었다. 이것은 입자 필기가 작아질수록 많은 흡착 사이트를 제공함으로써 높은 감도를 가지지만 반면 다량의 흡착된 가스들이 탈착 하는데 더 많은 시간이 소요되었기 때문이다.

• Analytical Science and Technology
• /
• v.24 no.4
• /
• pp.282-289
• /
• 2011

Rapid screening method for the determination of the emissions of pollutants from vehicle interior parts and materials have been developed as ISO 12219-2 which is using bag and based on a static condition. The method was not controlled humidity in the test bag, so it is not suitable test method for formaldehyde emission test which is highly related to humidity condition. In this study, possibility of control humidity in the static test bag by adding extra water and the effect of humidity condition for formaldehyde emissions have been investigated. The relative humidity in the test bag was affected not only amount of water added also material of test bag and test specimen. The emission intensity of formaldehyde was increased according to increasing relative humidity in test bag. But excessively supplied water was condensed on the inner surface of test bag and surface of sample specimen that were sorption formaldehyde and were reduced its emission intensity.

• Journal of Bio-Environment Control
• /
• v.22 no.1
• /
• pp.13-18
• /
• 2013

This study was conducted to examine the effect of temperature and relative humidity (RH) that might affect the pollen germination rate and pollen tube length in oriental melon. The experiment was performed using three cultivars namely 'Mallijangseong', 'Ohbokggul', and 'Joeundae' wherein environmental conditions were controlled by three different temperatures $15^{\circ}C$, $25^{\circ}C$, and $35^{\circ}C$ and also three RH levels 30%, 60%, and 90%. Based on the results in terms of temperature, true to all cultivars, plants exposed to $25^{\circ}C$ had the highest pollen germination rate while plants exposed to $15^{\circ}C$ had the lowest. Among the three cultivars, 'Mallijangseong' had the highest in terms of pollen germination rate, followed by 'Ohbokggul', and lastly was 'Joeundae' that showed the lowest germination rate. In the case of pollen tube length, pollen exposed under $35^{\circ}C$ showed the longest tube length, followed by pollen under $25^{\circ}C$, and pollen under $15^{\circ}C$ remarkably had the shortest tube length. Across the three cultivars 'Ohbokggul' had the longest pollen tube length. In the case of RH, pollen germination response among three cultivars depends on the humidity conditions but based on the results, there was no significant differences although high germination rate was observed in highest humidity condition. Between each cultivar, 'Ohbokggul' had the lowest pollen germination rate compared with 'Mallijangseong' and 'Joeundae' after exposure to different RH conditions wherein pollen germination showed significant differences among treatments. The pollen collected under 60% RH had the longest pollen tube length, followed by 30%, and the shortest was under 90% RH. In general, 'Ohbokggul' had the longest pollen tube length while 'Joeundae' had the shortest among the three cultivars.

• Journal of Bio-Environment Control
• /
• v.22 no.1
• /
• pp.35-41
• /
• 2013

This study was conducted to provide data necessary for reducing the condensation on greenhouse covering in winter season. The variation of VPD (Vapor Pressure Deficit) and condensation flux was analyzed in experimental tomato greenhouse. VPD values in experimental plastic greenhouse were greater than 0.2 kPa of disease prevention threshold, and lower than 0.5 kPa of threshold for dehumidification. The surface temperature of inside covering was slightly higher than the average temperature of outside and above curtain, and changed according to outside temperature. The humidity above curtain was nearly 100% and good condition for condensation. The humidity below curtain was 75~90% and comparatively stable condition for growing. The condensation flux value in experimental greenhouse corresponded with result of Seginer and Kantz (1986).

• Horticultural Science & Technology
• /
• v.16 no.3
• /
• pp.377-380
• /
• 1998

In order to investigate the effects of foliage plants on the changes of indoor thermal- and hygro- environments, experiments were carried out in two rooms with similar physical factors. Changes of indoor environmental parameters according to the existence of plants, their arrangement methods, and the existence of wrapseal for protecting the loss of water from the pot soil were measured during certain periods in winter and summer season, using Pachira aquatica which is widely used as indoor plant and has higher photosynthetic and traspiration rate than other foliage plants. The data suggested that the existence of plants didn't affect directly on the indoor thermal environment, while relative humidity increased about 3~5%, regardless of season, by putting plants which had volume equivalent to 2.4% of room volume. In summer, there was no difference in increasing effect of relative humidity between parallel arrangement with window and spread arrangement in the room, but in winter the former arrangement was more effective than the later.

• Journal of the Korean Vacuum Society
• /
• v.13 no.4
• /
• pp.157-163
• /
• 2004

Dependence of residual compressive stress of diamond-like carbon (DLC) films on relative humidity was investigated. Polymeric, graphitic and diamond-like carbon films were prepared by r.f.-PACVD using methane or benzene with the negative self bias voltage of the substrate ranging from -100 to -800 V. In-situ measurements of the residual stress were carried out in an environment chamber where the relative humidity was varied from 10％ to 90％. In dense DLC film of high residual compressive stress and hardness, we could not observe any change in the residual compressive stress with relative humidity. However, in the cases of graphitic and polymeric DLC films, abrupt change in the residual stress occurred by changing the relative humidity. The quantity of the stress change was inversely proportional to the film thickness, which means that the stress change with humidity is not due to the penetration of the water molecule into the film structure, but due to surface interaction between water molecules and film surface.

• Journal of the Korean Vacuum Society
• /
• v.15 no.3
• /
• pp.287-293
• /
• 2006

Diamond-like carbon (DLC) film was deposited using benzene $(C_6H_6)$ by r. f-plasma assisted chemical vapor deposition. The tribological properties of the DLC film were tested by rotating ball-on-disc type tribometer isolated by a chamber. The tribological test was performed in air environment of relative humidity ranging from 0 to 90% in order to observe the tribological behavior of the DLC film with the change of humidity. We used steel ball and DLC coated steel ball to investigate the effect of the counterface material. Using steel ball, the friction coefficient of DLC film increased from 0.025 to 0.2 as the humidity increased from 0% to 90%. In case of DLC coated steel ball which didn't form the Fe-rich debris, the friction coefficient showed much lower dependence of humidity as 0.08 in relative humidity 90%. We confirmed that the high humidity dependence of the friction coefficient using steel ball resulted from the increase of debris size with humidity and the formation of Fe-rich debris by the wear of steel ball. And the friction coefficient was immediately dropped when the relative humidity changed from 90% to 0% during test using steel ball. From this result, we confirmed that the effect of the Fe-rich debris on the friction coefficient was that Fe element in debris formed the highly sensitive graphitic transfer layer to humidity.

• The Korea Swine Journal
• /
• v.18 no.6 s.202
• /
• pp.166-171
• /
• 1996

여름철이 되면 평균 기온이 27도씨이상 되는 무더운 날씨가 계속되고 장마로 인하여 습도가 높아지면 불괘지수가 높아져서 관리자들도 모든 일이 짜증스럽고 주위가 산만해지기 쉬운 계절이다. 또한 여름철에는 양돈장에 파리와 모기 등의 해충이 많이 발생하고 유해 가스가 많이 생기며 사료가 쉽게 변질되는 등으로 돼지의 사육에 직접 간접으로 불리하게 미치는 영향이 커서 발육이나 번식 능력을 떨어뜨리게 된다. 특히 돼지는 선천적으로 다른 가축에 비하여 땀샘이 퇴화되고 피하지방이 두껍고 체지방축적이 많은 관계로 더위에 매우 약하므로 무더움 여름철에는 신진대사와 호르몬 분비 조절기능이 비정상적인 경우가 많아 사료섭취량 감소, 발육 지연 및 번식 성적에 관련되는 발정, 배란, 수태율, 산자수 등이 감소하게 된다. 따라서 무더운 날씨가 계속되는 여름철에는 다른 계절보다 돼지의 사육에 적합한 온도, 습도, 환기 등에 많은 관심을 기울여서 쾌적한 사육 환경을 조성하여 생산성을 높일 수 있도록 하고 그 중에서도 여름철에 돼지의 수태율을 향상시킬 수 있는 관리 대책을 강구해야겠다.