• Journal of the Korea Convergence Society
• /
• v.11 no.10
• /
• pp.25-30
• /
• 2020

In this study, a test system which can test performance of curling pad was developed to support Korea curling team. The developed system consists of a water tank, a mechanical pad driving system that can perform sweeping movement using a curling pad on surface of ice made by the water tank, and temperature sensors monitoring ice and air temperatures. To control the temperature of ice and humidity/temperature of air around the ice, all system are installed in a chamber that can isolate the developed system from external environment. Eight kinds of curling pads were tested using the developed system. Test result showed that each curling pad revealed different rate of ice temperature increasing. The pad with the highest rate of ice temperature rising was found to be the same as the most preferred pad by the athletes. Therefore, it was confirmed that the method of measuring change of ice temperature by the sweeping performed in this study is an effective method to test the performance of the pad.

• Journal of Food Hygiene and Safety
• /
• v.31 no.3
• /
• pp.201-209
• /
• 2016

Many atmospheric pollutants including chemical agents, house dust, and microorganisms cause building-related illnesses through respiration in humans. This study was conducted to analyze the profiles of microbial pollutants in air purifiers used in home, office and playschool. Dominant eleven species of microorganisms were isolated and identified in environmental air and air purifiers. Among them, Staphylococcus sp., Micrococcus sp. and Bacillus sp. are the most dominant species. By phylogenetic analysis of the 16S rRNA gene, the dominant bacteria were identified as Staphylococcus epidermidis, Micrococcus luteus and Bacillus epidermidis, respectively. It has been known that these bacterial species are closely related with food spoilage and human infectious disease. Thus, these results indicate that microbial pathogens related with human illnesses through respiration will be contaminated in air purifiers and also need to develop a method to control those of pathogens for human health.

• KIEAE Journal
• /
• v.14 no.3
• /
• pp.105-109
• /
• 2014

The recent rising living standards, environment-friendly, well-being and health aspects of life in the basic gratification, as well as the desire for a pleasant environment emotionally environmentally friendly way of external space or industrial interest in the indoor environment, the manifestation. In particular, the biggest problem of the indoor environment has been emerged as a Sick House Syndrome indoor space that is provided to the building materials, and the impact on the domestic and the indoor environment, and clean the house in a health standards are specified as laws. The performance rating and the various materials to create environmentally-friendly standards for building materials. The more detail, Porous clay material, toxic substances released by applying the high humidity and the water itself, and to absorb the moisture, if the emissions, without a separate device, to maintain a comfortable indoor environment and at the same time, one of the causes of Sick House Syndrome breaking down harmful substances to absorb a comfortable indoor environment to maintain an environmentally-friendly building interior material studies. It is aimed at the development to multi-functional high performance eco-friendly construction materials, rather than through one feature performance, identify key features for national and international eco-friendly building materials can exert Water Vapour Adsorption raw, decomposed materials for the application and selection.

• Journal of Adhesion and Interface
• /
• v.3 no.4
• /
• pp.37-43
• /
• 2002

A number of thin-film deposition technologies have been developed. However, even a thin film whose properties are excellent may not be used as long as the adhesion strength between the thin film and the substrate is poor. For thin films, the adhesion strength is as important as the properties. In the present article, relation between interface structure and thin film adhesion, and factors affecting thin film adhesion are reviewed. Two kinds of factors, internal factors and external factors, affect thin film adhesion. Such factors as composition, structure, and reactivity of both thin film and substrate as well as surface roughness of the substrate and residual stress of the thin film belong to internal factors. And such factors as load, temperature, humidity, and corrosive environment belong to external factors. It is also reviewed that how we can control the internal factors and the external factors to enhance or keep the adhesion strength.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.3
• /
• pp.607-612
• /
• 2009

For the development of ecological sound proof wall, successful seed germination and growth of plants are very important. In our present study, we observed germination of thirty five different seed species in growth chamber at $24^{\circ}C$, humidity 60% and alternation of 12 hours photoperiods. Germination of same seeds were carried out at room temperature on 6:4, 7:3, 8:2, and 9:1 proportion of pure and mineral soils respectively. Out of studied species, maximum germination was recorded for Perennial penant (92%), followed by Brassica napus (86%), and Silene armeria (82%). The measurement of root/shoot length showed, maximum root/shoot length for Perennial penant, followed by perennial sonata and Rebolsentri sp. Based on germination percentage and root/shoot length of germinating seeds, we considered Perennial penant, perennial sonata and Rebolsentri sp. were proper species for the construction of ecological sound proof walls

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.3
• /
• pp.152-159
• /
• 2010

Recently, the public interest in eco-friendly material and structure has been increasing and many Hwang-toh researches are being actively performed. Hwang-toh is one of the traditional environment friendly construction materials used as a construction and plastering material. Hwang-toh has many advantages as construction material due to its high heat storage capacity, auto-purification, antibiotic ability, and infrared ray emission characteristics. But, currently it has not been developed into construction material and used in modern construction due to its low strength and dry shrinkage cracking prone characteristics. According to the recent researches and study results, Hwang-toh can be used as a natural pozzolanic material like fly-ash or pozzolan. In this study, mechanical properties and structural flexure behavior experiments of slag, recycled PET fiber, and Hwang-toh added concrete are carried out. The test results showed that drying shrinkage of concrete mixed with Hwang-toh has lower compressive strength and elastic modulus than those of control cement concrete specimen, but it has the similar flexural behavior in reinforced concrete beams.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.423-423
• /
• 2023

습지 생태계는 탄소저장고, 대기 온·습도 조절 등의 기능을 수행하는 만큼 면밀한 관리가 요구된다. 습지의 규모와 생태계는 밀접한 연관성을 가지므로 그 규모를 우선적으로 파악할 필요가 있으며, 이를 위해 지표면의 상태를 산지, 습지, 수역 등의 항목으로 구분한 토지피복지도가 고려될 수 있다. 현재, 환경부에서 운영 중인 환경공간정보서비스(https://egis.me.go.kr/)에서는 각각 30 m, 5 m, 1 m의 공간 해상도와 7, 22, 41가지 분류 항목을 갖는 대분류, 중분류, 세분류로 구분된 토지피복지도를 제공하며 이러한 자료들은 모두 1년 이상의 시간 해상도를 갖는다. 습지의 경우, 계절에 따른 환경 변화로 인한 규모의 변동성이 크게 나타날 수 있기 때문에 1년 이하의 시간 해상도를 갖는 고품질 토지피복 분류 정보가 요구된다. 따라서 본 연구에서는 기존 자료의 낮은 시간 해상도 보완을 목표로, 1개월과 30 m의 시·공간 해상도를 갖는 토지피복지도를 구축하기 위한 방법론을 제안하고자 한다. 이를 위해 Landsat-8 등과 같은 다양한 인공위성 자료를 수집하고, Support Vector Machine 등과 같은 머신러닝 기법을 적용하였다. 최종적으로 습지보전법에서 지정한 습지보호지역 중 내륙습지 26개소를 대상으로, 본 연구로부터 산출된 토지피복지도를 기존 환경공간정보서비스 내 대분류 토지피복지도와 비교·평가하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.320-320
• /
• 2022

기후변화와 도시화로 인한 영향으로 도시의 폭우, 폭염을 비롯한 현상이 빈번하게 발생하고 있다. 특히 시가화 지역의 높은 불투수율은 도시홍수를 야기한다. 이러한 현상을 완화하기 위해 도시지역에서는 그린인프라와 저영향개발이 도입되고 있다. 그 중 지속가능한 발전을 위한 필수요소로 자리매김한 옥상녹화는 도시에 위치한 건물의 상층부와 내부의 온도를 낮춤으로써 에너지절감효과와 강우 시 빗물을 저류함으로써 우수유출 저감효과, 그리고 도시 공간 내 녹지도입으로 인한 이산화탄소 배출 저감 효과 등을 기대할 수 있다. 본 연구에서는 열섬현상완화와 유출 저감의 방안 중 하나인 옥상녹화(Green roof)의 효과를 정량적으로 평가하기 위해 콘크리트로 이루어진 동일한 제원의 실험동을 구축하고, 실험동 내외부의 온도, 습도, 강우, 풍속, 일사량 등의 기상자료를 측정할 수 있는 센서를 설치하였다. 각 실험동에서 측정된 기상요소를 Flux Profile Method를 적용하여 공간 내에 있는 열에너지의 총량인 순복사열을 구성하는 현열속, 잠열속, 토양열속(H, LE, G)을 산정하였다. 또한 에너지 평형에 따라 산정된 각 실험동의 열속과 지표면 복사량 관측자료을 정량적으로 비교하여 옥상녹화의 적용성을 평가하였다. 2021년 7월 21일부터 2021년 7월 28일 까지 모니터링한 결과 옥상녹화의 열 효율은 일반 콘크리트 지붕에 비해 실내온도가 최대 6.83℃ 낮게 나타나며 이는 여름철 건물 내부의 온도조절에 필요한 에너지 저감효과를 볼 수 있다. Flux Profile Method를 적용한 결과 옥상녹화의 전체 열속 중 현열속 28.5% 잠열속 70.7%, 토양열속 0.5% 의 복사량 분포를 보였고, 일반 콘크리트 지붕은 현열속 45.3%, 잠열속 38.6%, 토양열속 16.2% 으로 나타났다. 이와 같은 방법은 옥상녹화의 정량적 평가를 가능하게 함으로서 향후 기후변화 대응방안 및 전략 수립 시 옥상녹화의 온도저감효과 분석에 적극 활용할 수 있을 것으로 판단된다.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.14 no.1
• /
• pp.195-209
• /
• 2012

1) 버섯종균 생산 시스템 개선 버섯의 품질과 수량을 좌우하는 주요 요인은 종균의 활력이다. 그러나 말라위에서는 종균의 활력이 낮아 조그마한 350cc 음료수 병에 배양 완성하는데 20일이 소요되는 등 노동력의 비효율성을 개선하였다. 따라서 350cc 병을 3500cc 비닐봉지로 개선하여 입봉하는데 소요되는 시간을 10배 이상으로 단축 개선하였다. 또한 곡립종균을 액체종균으로 대처한 결과 균사생장 속도가 빨랐으며 작업속도가 빨라졌다. 곡립 수수를 밀로 대체하여 종균제조 노동력을 효율적으로 전환하였다. 2) 버섯재배사 환경관리 개선 버섯재배의 4대 환경조건은 온도, 습도, 환기, 광이다. 그러나 말라위의 버섯재배사는 4대 환경조건 조절을 자연상태에 의존하고 있다. 그럼에도 불구하고 비닐로 커버된 상태에서 문을 닫아두어 과습이 되고 환기가 되지않았다. 이를 개선하기 위하여 직경 5cm 환기공을 버섯재배사 당 4개씩 만들도록 지도하였다. 3) 버섯배지 개선 말라위에서는 옥수수 대를 잘라 버섯배지로 주로 이용하고 있다. 이를 개선하여 말라위 북부지역(다광)에 대규모 사탕수수 공장을 방문하여 사탕수수 박을 이용하여 버섯재배 기술을 교육하였다. 이를 이용함으로서 버섯 균사생장속도를 빠르게 하고 균사량의 축적을 높이도록 하여 고품질 다수확하는데 교육을 하고 컨설팅을 실시하여 개선하였다. 4) 버섯 배지 야외발효 후 지면재배 시도로 시간 단축과 비용절감 말라위 버섯배지 혼합제조법은 옥수수대 한가지로서 영양원이 없다. 이를 개선하여 배지를 수분을 흡수시킨 후 야외 퇴적하므로서 배지의 물리성을 개선하고 야외발효 과정 중 양분이 합성되어 양질의 배지를 만드는 방법이다. 야외발효한 배지를 봉지에 담아 균상에 입상하는 불편함과 나무로 만들어진 균상대의 과습으로 인한 곰팡이 발생과 개미 침입으로 썩는 것 등을 방지하기 위하여 지면재배 방법으로 개선하였다. 이 지면재배는 균상 만드는 나무재료와 인건비 절감. 병해충 발생 방제 뿐만아니라 고품질 다수확할 수 있는 방법으로 개선 교육과 시범 시연을 실시하였다.

• Korean Journal of Environment and Ecology
• /
• v.34 no.4
• /
• pp.294-303
• /
• 2020

This study aimed to examine was conducted to the ability of microclimate control in old pine forests by surveying pine forest in Buddhist temples, where the pine forest are stably growing through active protection in the Gyeongnam region, and comparing variation characteristics of microclimate characteristics (temperature and humidity) and distribution of vegetation type. The study sites were pine forests protected well by Buddhist temples (Haein-sa, Beomeo-sa, Tongdo-sa, and Bulguk-sa) in the southeast region of Korea and thus known for stably growing young pine trees. According to the vegetation distribution status analysis, these pine forests did not have a high ratio of pine trees. Except for Tongdo-sa, the ratio of deciduous forest and mixed (deciduous and pine trees) forest had a much larger presence than that of pine forest. Measured data of microclimate showed that the Tongdo-sa area had significantly different characteristics compared to the other three areas. Tongdo-sa area showed a significantly higher diurnal range of temperatures and humidity than the other three areas, in both spring and summer. It is due to the difference in vegetation management. The forests around Tongdo-sa are mostly pine forests, except for the developed areas, while those in the other three areas have a dominant ratio of deciduous brad-leaved forests. Intensive control of pine forest is not effective in mitigating microclimate, i.e., temperature and air humidity. Stress caused by rising temperatures and decreasing air humidity is blamed for the decline of pine forests. Thus, the current active management of pine forests, such as the Tongdo-sa case, has been found to have a greater negative impact on the temperature and humidity stress. Therefore, we believe that a new change in forest management is necessary to increase the effect of mitigating the microclimate of pine forests.