• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.298-301
• /
• 2003

생물학적 토양오염 복원기술은 산소와 영양염류를 오염토양에 공급하여 호기성 미생물의 대사작용을 자극함으로써 유류를 생분해 하는 방법으로 널리 사용되고 있다. 유류에 오염된 토양은 혐기성 상태인 경우가 대부분이기 때문에, 호기성 미생물을 이용하기 위해서는 충분한 산소를 공급하여야 하므로 운전비가 많이 드는 단점이 있다. 최근에는 혐기성 미생물을 이용하여 유류오염 토양을 정화하는 방법이 보고되고 있다. 혐기성 생분해 방법은 다소 분해 속도는 느리지만 산소를 공급하지 않기 때문에 경제적인 유류오염토양 복원 방법으로 주목받고 있다. 본 연구에서는 디젤을 사용하여 인위적으로 10000 mg/kg.TPH soil의 농도로 오염시킨 토양 50g을 100$m\ell$ 용적의 vial에 주입하고 하수처리장의 혐기성 소화조 슬러지를 15$m\ell$, 30$m\ell$을 주입하여 배양하였으며 TPH의 분해량과 CH$_4$ 및 $CO_2$ 발생량을 측정하였다. vial의 기상을 $N_2$가스로 치환함으로써 혐기성 상태가 되도록 하였으며, 35$^{\circ}C$에서 90일간 배양하였다. 그 결과, 슬러지를 주입하지 않은 대조군의 경우에는 TPH의 분해가 거의 없었지만, 슬러지를 주입한 경우에는 TPH(Total Petroleum Hydrocarbon)농도가 55% 제거된 것으로 나타났다. TPH의 분해는 CH$_4$ 및 $CO_2$ 발생량과 밀접한 상관관계를 보였다. 본 연구의 결과로부터 하수처리장의 혐기성 소화조 슬러지를 이용한 유류오염 토양의 복원 가능성을 확인할 수 있었다.양에서 유동 가능성이 있는 중금속만을 추출하였다. 분석실험은 토양의 Cd2+ 와 Pb2+를 대상으로 행하여졌으며, 여러 토양에서 추출 분석한 결과를 EDTA분석결과와 비교하였다. 실험결과, 중금속은 매우 신속하게 고분자 자성체와 결합하였고, 그 후 자성체를 외부 자장으로 모은 후 산으로 용해시키고, 결합된 중금속은 Graphite furnace AAS로 분석함으로써 빠르고 효율적으로 분석실험을 수행할 수 있음을 알 수 있었다. 한편, 실험에서 나타난 수치들을 비교 검토한 결과 토양 분석시 sandy soil에서는 자성체를 이용한 분석이 EDTA에 의한 방법보다 더 높은 추출도를 보인 반면, silt 함량이 많은 토양의 경우에서 EDTA분석에서 더 높은 중금속 추출도를 보였다.s 중에서 490nm와 555nm의 복합밴드를 포함하는 OC2 알고리즘(ocean color chlorophyll 2 algorithm)을 사용하는 것이 OC2 series 및 OC4 알고리즘보다 좋은 추정 값을 도출할 수 있을 것으로 기대된다.환경에서는 5일에서 7월에 주로 이 충체의 유충이 발육되고 전파되는 것으로 추측되었다.러 가지 방법들을 적극 적용하여 금후 검토해볼 필요가 있을 것이다.잡은 전혀 삭과가 형성되지 않았다. 이 결과는 종간 교잡종을 자방친으로 하고 그 자방친의 화분친을 사용할 때만 교잡이 이루어지고 있음을 나타내고 있다. 따라서 여교잡을 통한 종간잡종 품종육성 활용방안을 금후 적극 확대 검토해야 할 것이다하였다.함을 보이고 있다.X> , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.1
• /
• pp.21-29
• /
• 2016

We mix food waste leachate and sewage sludge by the proportion of 1:9, 3:7 and 5:5. It turns out that they produced 233, 298 and 344 $CH_4{\cdot}mL/g{\cdot}VS$ of methane gas. The result suggests that as the mixing rate of food waste leachate rises, the methane gas productions increases as well. And more methane gas is made when co-digesting sewage sludge and food waste leachate based on the mixing ratio, rather than digesting only sewage sludge alone. Modified Gompertz and Exponential Model describe the BMP test results that show how methane gas are produced from organic waste. According to the test, higher the mixing rate of food waste leachate is, higher the methane gas productions is. The mixing ratio of food waste leachate that produces the largest volume of methane gas is 3:7. Modified Gompertz model and Exponential model describe the test results very well. The correlation values($R^2$) that show how the results of model prediction and experiment are close is 0.92 to 0.98.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.4
• /
• pp.51-58
• /
• 2023

In this study, anaerobic co-digestion was carried out using desulfurization sludge and sewage sludge (primary sludge) to evaluate the effects of sulfur compounds in anaerobic digestion. The experiment was carried out in the form of a batch test using 500 mL duran bottle, and the mixing ratio of the feedstock was selected based on the ratio of COD/SO₄. As a result of the experiment, it was confirmed that the amount of biogas generated and the yield decreased at the mixing ratio of COD/SO₄ 20 or less. In particular, below COD/SO₄ 10, it was lower than seed (283.5 mL) which was set without feedstock to correct biogas generated by itself from seed sludge. Methane yield tended to decrease from a ratio of COD/SO₄ 20 or less to 0.135 m³/kg VS compared to 0.396 m³/kg VS of COD/SO₄ 50. In addition, compared to 0.0097 m³/kg VS of hydrogen sulfide yield from COD/SO₄ 50, the ratio of COD/SO₄ 20 increased sharply to 0.0223 m³/kg VS, and in particular, the highest result was 0.0855 m³/kg VS in COD/SO₄ 10. Based on these results, it is judged that the effect of sulfide in anaerobic digestion can have an adverse effect if the COD/SO₄ ratio decreases to less than 20.

• Resources Recycling
• /
• v.13 no.3
• /
• pp.12-18
• /
• 2004

A study on the enhancement of the dewaterability of sewage sludge was carried out by using the sea waste materials as a dewatering aid. It was made from a starfish and a shell by heating at $105∼700 ^{\circ}C$ and centrifuge and belt press were used as a mechanical dewatering process. The moisture content of sludge cake was reduced by 15∼22% (w/w) after addition of the dewatering aid at the dose of 1∼8 g/100mL of digested sludge. CST (capillary suction time) was measured to evaluate the effect of dewatering aid on sludge dewatering properties. CST was reduced after addition of a shell while increased after addition of a starfish. Enhancement of dewaterability after addition of a shell was better than that of a starfish. The heating temperature effect of the dewatering aid on dewaterability was not clear.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.194-201
• /
• 2012

In this research, a sewage sludge solubilization study using electrolysis was performed as a pre-treatment for anaerobic digestion efficiency improvement. SCOD potency increased as the treatment time and electric current density increased with sludge electrolysis treatment while SCOD, TN, and TP especially showed the highest increase of 7.4 times, 1.9 times, and 1.3 times respectively at the 60 minute point of treatment. Solubilization was high at the strong acidic and alkaline status for the sewage sludge electrolysis treatment results along early stage pH, and especially, a high solubilization percentage of 32.9% was seen at pH 12. The above result shows that there was an increase of organic matter able to be used by microorganisms from sludge floc and the destruction of EPS structure due to direct and indirect oxidation following electrolysis.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.413-424
• /
• 2014

The potential of using the biogas as energy source has long been widely recognised and current techniques are being developed to upgrade the technical quality and to enhance energy efficiency. The objective of this paper is to present efficient and effective pre-treatment methods of increasing the amount of produced biogas in anaerobic digestion of activated sludge treatment process. The paper also presents a review of the effect on biogas production between pre-treated and raw sludge, and also put forward the advantages and disadvantages of each pre-treatment method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.874-880
• /
• 2007

Capillary Suction Time(CST) and Specific Resistance to Filtration(SRF) were commonly used to evaluate the sludge dewatering behaviors. A coupled equation was developed through the mathematical theory which represented both CST and SRF as the physical filterability of the ultrasonically treated sludge. The model for coupling CST and SRF includes both equipment variables and variables related to sludge characteristics, and verified with the results from experiments. The results of the theoretical and experimental study showed that a good correlation relationship among dewaterability indices.

• KSBB Journal
• /
• v.13 no.3
• /
• pp.279-283
• /
• 1998

To investigate the feasibility of the microbial process for removal of heavy metals from the high solid content sludge, the effect of sludge concentration on the solubilization of heavy metals by an iron oxidizing bacterium Thiolbacillus ferrooxidans was examined. With increasing the sludge concentration, the removal efficiency of heavy metals and the oxidation rate of iron were inhibited. Especially, when the sludge concentration is over 5% (w/v), the activity of T. ferrooxidans was remarkably inhibited. This inhibition is considered to occur due to the dissolved inhibitory materials such as organic compounds, heavy metals, and others which were extracted from the sludge during incubation period. In conclusion, the microbial process by T. ferrooxidans is only effectively used in ranges of 1.3 to 4.0% (w/v) sludge concentration.

• Journal of Korean Society of Water and Wastewater
• /
• v.11 no.1
• /
• pp.74-80
• /
• 1997

The objectives of this study were to compare the characteristics of water quality in alternative Aerobic-Anoxic(A/A) and Aerobic(Control) sludge digestion. The A/A process control parameter as the pH signal(dpH/dt) was used. Comparison of the result of A/A digestion with those of Aerobic digestion indicated a 54% saving in aeration compared to Aerobic digestion. TN removal efficiency rates of A/A and Aerobic digestion were 45% and 4%, respectively. The concentration of COD(64 mg/l and 268 mg/l for the A/A and Aerobic digestion, respectively) and Ortho-P in the supernatant were also less with A/A digestion. MLVSS and Coliform destructions were noticed similar for both digestion, but better dewatering charateristics were noted for the A/A digestion.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.532-536
• /
• 2016

In this study, single-stage continuous anaerobic reactors to treat sewage sludge were operated under different temperature (55 and $35^{\circ}C$; $R_{TAD}$ and $R_{MAD}$) to evaluate the reactor stability and performance of the thermophilic and mesophilic anaerobic digestion. During the overall digestion, both anaerobic reactors maintained quite stable and constant pH and total alkalinity (TA) values in the range of 6.5-8.0 and 3-4 g $CaCO_3/L$, respectively. After the start-up period, $R_{TAD}$ showed 10% higher VS removal efficiency than that of $R_{MAD}$ ($R_{TAD}$; 43.3%; $R_{MAD}$ : 33.6%). Although organic acids such as acetic and propionic acid were detected in both anaerobic reactors at the start-up period, all organic acids in $R_{TAD}$ and $R_{MAD}$ were consumed at the steady state condition. Also $R_{TAD}$ showed 31.4 % higher methane production rate (MPR) than that of $R_{MAD}$ at the steady state condition ($R_{TAD}$; 243 mL $CH_4/L/d$; $R_{MAD}$ : 185 mL $CH_4/L/d$). Meanwhile, the experimental results indicated similar methane yield between $R_{TAD}$ and $R_{MAD}$.