• Clean Technology
• /
• v.6 no.2
• /
• pp.85-92
• /
• 2000

For increase of recycling rate of steel-making slag, the swine wastewater treatment using steel-making slag as filter media were investigated. As the discharged wastewater from the existing facilities retreated through the laboratory wastewater treatment equipment filled with steel-making slag as filter, pH of retreated wastewater was increased, and the concentration of N, P, COD and BOD were decreased. For the pilot experiment, steel-making slag eliminated suspended substances and absorbed a shock of sudden change of their concentration in influent. COD and BOD were decreased under the influence of them in influent. As calcination increased the amount of free-CaO in steel-making slag, the calcined eliminated phosphorus more effectively and increase pH than the uncalcined.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.674-677
• /
• 2012

본 연구에서는 기존 매립이나 지반보강재로 사용되던 소각재 용융슬래그를 고부가가치 수처리 여재로 활용하기 위하여 형광성 박테리아를 통한 Microtox 생물검정법으로 독성을 평가하였다. 소각재 용융슬래그의 독성평가 대조군으로는 기존의 수처리 여재인 입상활성탄(석탄계/야자계/목탄계), PP PE펠렛(Poly-Propylene Poly-Ethylene pallet), 표준여과사를 비교하였으며, 시료의 용출시험은 US EPA에서 제안한 TCLP 방법을 사용하였다. Microtox Acute Toxicity 평가 결과, 독성순위는 석탄계 입상 활성탄, 소각재 용융슬래그, 목탄계 입상활성탄, 야자계 입상활성탄, 표준여과사, PP PE 순으로 나타났으며, 실험에 사용된 모든 수처리 여재들은 급성독성을 고려하지 않는 무독성으로 나타났다. 따라서 소각재 용융슬래그가 수처리를 목적으로 수체에 편입시켜도 기존의 수처리 여재들과 비교할 때 수환경에 미치는 영향은 미미할 것으로 판단된다.

• Journal of Korean Society of Forest Science
• /
• v.90 no.6
• /
• pp.699-706
• /
• 2001

This study was conducted to evaluate the effectiveness of basic oxygen furnace (BOF) slag as soil conditioner in a nursery and two natural forests. The BOF slag was applied at rates of 0, 4, 8, and 12 t/ha for seedbed nursery of three tree species-Pinus densiflora, Larix leptolepis and Amorpha fruticosa; and 0, 10, 20, and 40 t/ha for Pinus densiflora natural forests located at two sites. In case of the nursery study, the significant increase in soil pH and contents of Ca, Mg, $SiO_2$, Fe and Mn was noticed after six months of the BOF slag application. Dry weight of Pinus densiflora seedlings with BOF slag treatments was lower compared with that of control. There were no significant differences among treatments in dry weight of Larix leptolepis seedlings. Dry weight of Amorpha fruticosa seedlings, which are deciduous species and grow rapidly at seedling stage, increased significantly and T/R ratio decreased as BOF slag rate increased. The differences of effects of BOF slag application on the seedlings of tree species may be attributed to the differences of optimum pH range of the species. In Pinus densiflora natural forests, there were no significant differences in soil pH and contents of $SiO_2$, Fe and Mn among the treatments, but these values became higher as BOF slag rate increased. Contents of Ca in soil became significantly higher as BOF slag rate increased. There were no significant differences among treatments in net production of mature Pinus densiflora trees, but BOF slag rate of 10ton/ha showed the highest net production. Young Pinus densiflora trees at the plots of BOF slag rate of 10 t/ha showed significantly higher root collar diameter growth rate and twig net production than those of other treatments. It may be given as a conclusion that BOF slag application in nursery and forest soil increased soil pH and contents of Ca, $SiO_2$, Fe and Mn in soil and they showed the ability of BOF slag to be used as a soil conditioner in strongly acid soil.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.1
• /
• pp.128-135
• /
• 2006

Steel slag (divided into electric arc furnace slag and convener slag) is being produced by millions of tons per every year in many industrial countries. About 6.5 million tonnes of steel slag is produced yearly as an industrial by-product in Korea. Generally natural aggregate is relatively stable and does not enter into complex chemical reactions with water. Unfortunately, however. steel slag aggregate contains a small amount of free lime. The hydration of free lime makes steel slag aggregate unstable and liable to expand. In this paper, firstly, several aging methods are used in order to decrease the volume expansion of electric arc furnace slag, that is stabilization. The volume expansion of electric arc furnace slag is formulated from the experiment. From the formula, the residual expansibility is predicted with immersion expansion. Compressive strength of concrete with electric arc furnace slag has relation with the residual expansibility in slag aggregate.

• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.597-607
• /
• 2002

Electric arc furnace and converter slag are produced by about 6 millions tons in Korea at 2000 year. But compared with blast furnace slag, those are utilized only in unvalued material like landfill and road construction. There are unstable materials, like free CaO, in electric arc furnace and converter slag at steel-manufacturing process. This might cause volume expansion in concrete, if electric arc furnace and converter slag aggregates were used in concrete. This expansion may reach to crack or collapse of concrete. It is therefore settled by standard specification for concrete that electric arc furnace and converter slag aggregates have not to use in concrete. First of all, volume stability and stabilized process should be solved in electric arc furnace and converter slag aggregate to use in concrete. In this study, 6 types of aging are evaluated for effects of stabilization to reduce the expansion of electric arc furnace and converter slag. h converter slag aggregate, these types of aging are not good for volume stability for concrete aggregate, and even if converter slag aggregate is treated with aging, concrete with it has some problems that strength is reduced with curing days. But in electric arc furnace slag aggregate treated with hotwater and steam aging, the expansion of electric arc furnace slag aggregate is reduced about two times than that of converter slag aggregate, and electric arc furnace slag aggregate concrete has good results in strength compared with control concrete using crushed stone.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.6
• /
• pp.631-638
• /
• 2010

The objective of this study was to evaluate the efficiency of zerovalent iron and basic oxygen furnace slag on arsenic stabilization in soils. For this, arsenic (V) contaminated soil and roxarsone contaminated soil were incubated after incorporation with zerovalent iron (ZVI) or basic oxygen furnace slage (BOFS) at four different levels (0%, 1%, 3%, and 5%) for 30 days and then the residual concentrations of arsenic were analysed following extraction with aqua reqia, 1N HCl and 0.01 M $CaCl_2$. The total concentration of arsenic was 2,285 mg/kg in the As(V) contaminated soil and 6.5 mg/kg in the roxarsone contaminated soil. 1 N HCl extractable arsenic concentration in the As(V) contaminated soil was initially 1,351 mg/kg and this was significantly declined by 713~1,034 mg/kg following incubation with ZVI while BOFS treatment showed no effect on the stabilization of inorganic arsenate except 5% treatment which showed around 100 mg/kg reduction in 1N HCl extractable arsenic. Similarly, in the roxarsone contaminated soil 1N HCl extractable concentration of arsenic was reduced from 3.13 mg/kg to 0.69 mg/kg with ZVI treatment increased from 1% to 5% while BOFS treatment did not lead to any statistically significant reduction. Available (0.01M $CaCl_2$ extractable) arsenic was initially 0.85 mg/kg in the As(V) contaminated soil and this declined by 0.79 mg/kg following incorporation with 5% ZVI, which accounted for more than 90% of the available As in the control. When As(V)-contaminated soil was treated with BOFS, the available arsenic was increased due to competing effect of the phosphate originated from BOFS with arsenate for the adsorption sites. For the roxarsone contaminated soil, the greater the treatment of ZVI or BOFS, the lower the available arsenic concentration although it was still higher than that of the control.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.76.1-76.1
• /
• 2011

석탄 가스화기 내에서 슬래그의 축적에 의한 막힘 현상 등으로 발생 가능한 조업중단을 예방하기 위해 탄의 종류에 따른 슬래그의 유동을 정확히 예측하는 것은 중요하다. 슬래그의 유동은 원료인 석탄의 회 성분 조성 그리고 가스화기 온도의 영향을 크게 받는다. 회가 용융된 형태인 슬래그의 융점 특성을 파악하여 슬래그 거동을 예측하기 위해서는 회를 조성하고 있는 주성분의 비율 뿐 아니라 소량의 성분들도 고려하여야 한다. 또한, 가스화기 조업 조건 중 수증기 분압이 슬래그 점도에 미치는 변화를 파악하여 공정 조건 확립 및 슬래그 계통 제어 로직에 반영 할 수 있다. 따라서, 대표적 열화학 평형계산 프로그램인 Factsage를 이용하여 슬래그 성분의 액상선 온도를 예측해보았다. 슬래그는 회 성분의 조성에 따라 결정 슬래그와 유리 슬래그로 나눌 수 있다. 본 연구에서는 결정 슬래그로는 Alaska Usibelli 탄을, 유리 슬래그로는 Kideco 탄의 조성을 사용하여, 가스화기 조업 조건 중 수증기의 분압에 따라 석탄 슬래그의 형성 및 점도 변화에 직접적인 영향을 미치는 결정 형성에 대한 상관관계를 예측해 보았다. 또한, 슬래그 유동에 영향을 줄 수 있는 요인으로써, 석탄의 품질을 결정하는 인자인 Base/Acid Ratio, Iron in Ash, Calcium in Ash, Silica-to-Alumina Ratio, Inron-to-Calcium Ratio를 달리 변화시켜가며 슬래그 점도 변화에 직접적인 영향을 미치는 결정 형성을 예측하였다. 이 예측결과는 향후 실험 데이터와 비교하여, 슬래그 처리 부분의 모니터링에 기초 자료로 활용될 뿐 아니라, 슬래그점도 측정 시스템의 운전 파라미터를 도출하는데 이용 가능할 것이다.

• Resources Recycling
• /
• v.18 no.4
• /
• pp.52-61
• /
• 2009

Purpose of this research is deducing optimum pretreatment method of electric arc furnace slag from comparing and investigating the properties of electric arc furnace slag and electric arc furnace slag concrete by existing pretreatment method and surface pretreatment method being used by this research. Besides, as the surface pretreatment method, the method of naturally drying for 6 hours after impregnating with an inorganic type silica solution for 1 day was used. From the results, comparing the hot water treatment method, surface treatment method being used by this research is more effective. Therefore, it is judged that surface treatment method is more effective in the decrease of expansibility of electric arc furnace slag and practical use.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.3
• /
• pp.205-211
• /
• 2000

This study was conducted to evaluate the residual effects of basic oxygen furnace (BOF) slag applied in rice paddy fields as soil conditioner one year before. The experimental fields of Lim et al. (2000) located in Youjung and Nampyung were used for this purpose. Both variety (Oryza sativa L. cv. Dongjinbyeo) and cultural practices were the same as those in Lim et al. (2000). Soil chemical properties, plant height, number of tillers per plant, yield and yield components were observed. The temporal variation of treatment mean value in soil chemical properties appeared to be similar trends in both Youjung and Nampyung experimental fields. Soil pH and Ca content were still significantly higher than those in control treatment up to July of the second season, but decreased progressively as time passed. However, the effects lasted longer as slag rate became higher. BOF slag seems to have residual effects as a soil conditioner or Ca fertilizer in soil for two years. BOF slag rate of $4Mg\;ha^{-1}$ raised soil pH almost the same as lime rate of $2Mg\;ha^{-1}$. Content of $SiO_2$ in soil applied slag appeared to be higher compared with control. Fe and Mg content in soil with slag treatment was significantly higher than that of control in 1997, but it was almost the same level as that of control in 1998. In YouJung experimental field, rough rice yield of slag teatment became higher as slage rate incresed. Slag rate of $12Mg\;ha^{-1}$ showed the highest rough rice yield of $5,400kg\;ha^{-1}$ among treatment, which was 14% higher than that of control with $4,720kg\;ha^{-1}$. Slag rate of $12Mg\;ha^{-1}$ showed relatively higher plant height and higher number of tillers at the early growth stage compared with other treatments. In NamPyung experimental field, rough rice yield was the highest at the plot of lime rate $2Mg\;ha^{-1}$ and became higher as slag rate increased. There were no significant differences in rough rice yield between lime treatment and slag treatments. Slag rate of $12Mg\;ha^{-1}$ showed the highest rough rice yield of $7,170kg\;ha^{-1}$ among slag treatment, which was 8% significantly higher than that of control with $6,670kg\;ha^{-1}$. Slag rate of $12Mg\;ha^{-1}$ showed relatively slower growth in plant height at the early growth stage, but superior growth at the later growth stage, and significantly higher number of spiklets per panicle and 1000-grain weight than that of control.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.3
• /
• pp.295-303
• /
• 1999

An experiment was conducted to evaluate the possibility of using basic oxygen furnace (BOF) slag as a soil conditioner in rice paddy field. In 1997, rice (Oryza sativa B. cv. Dongjinbyeo) crop was cultivated under different application rates of BOF slag at three different places, Inandong Sunchon city, Youjunglee Bosung province, and Nampyung Najoo city. In each paddy field, five treatments, four application rate of BOF slag (0, 4, 8, $12Mg\;ha^{-1}$) and one application rate of lime ($2Mg\;ha^{-1}$) were tried with three replications. Plant height, number of tillers per hill, leaf area per hill, leaf dry weight, calm dry weight or shoot dry weight per hill were measured five times at the interval of seven days. Chemical contents of rice plants and soil were also measured at the same sampling date Yield were estimated by harvesting $6.6m^2$ per experimental unit and yield components were measured by sampling 10 plants per experimental unit at the harvest date. Application of BOF slag hardly affected contents of soil organic matter, available phosphate and potassium in soil. Soil pH and contents of Ca, Mg, Fe and $SiO_2$ enhanced as BOF slag rate increased. Enhancement of soil pH by ROF slag treatment appeared to be closely related with increase in soil Ca content. Application tate of $2Mg\;ha^{-1}$ of lime showed almost the same effect, in increase of soil Ca content as application rate of $4{\sim}8Mg\;ha^{-1}$ of BOF slag, Fe content in soil decreased sharply as time passed after slag treatment and stabilized more or less at the later sampling date. Contents of inorganic matter in plant such as total nitrogen, phosphate, potassium and Mg were not affected by BOF slag treatment. However, contents of Ca, Fe, and $SiO_2$ in plants increased as slag rate became higher. The growth of rice plants with BOF slag treatment was more or less slower but continued persistently up to the later growth stage, so that growth of plants with BOF slag treatment was almost the same nr even greater than that of control or lime treatment. However, BOF slag rate of $12Mg\;ha^{-1}$ seemed to be too high because all the measurements of plant, growth at this rate showed lower values than those of other treatments at all the sampling dates. Treatments of BOF slag $4Mg\;ha^{-1}$ or $8Mg\;ha^{-1}$ showed higher rough rice yield than other treatments, so that the optimum BOF slag ratein rice paddy field seemed to be in the rage of $4{\sim}8Mg\;ha^{-1}$.