• 한국음향학회지
• /
• 제25권3호
• /
• pp.101-106
• /
• 2006

본 연구에서는 그릴에 뚫려 있는 구멍이 마이크로스피커의 전체 임피던스에 미치는 영향에 대하여 조사하였다 이들에 대한 영향을 이론적으로 접근하기 위하여 그릴의 구멍을 열린 짧은 길이를 갖는 파이프시스템의 일종인 올피스로 취급하였다. 이에 대한 결과는 실험적으로 얻어진 특성과 매우 잘 일치하였다. 다시 말하면, 이들의 구멍크기가 작아지게 되면 구멍에 의한 음향임피던스가 매우 커지게 된다. 그 결과로써, 마이크로스피커의 전체 음향임피던스에 미치는 영향이 커지는 것을 알 수 있었다. 이처럼 그릴의 구멍크기가 작을수록 전체 임피던스에 미치는 영향이 커져서 마이크로 스피커 유닛에서 발생한 음향특성이 그릴의 사용으로 인하여 달라질 수 있게 된다.

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1294-1301
• /
• 2001

In order to reduce the time and cost for assembly, automobile speaker grills have been injection molded with door trims or map pockets in one piece recently. However, several defects such as short shots or air traps can easily occur due to the decreased fluidity of the melting polymer according to the excessive heat transfer to the mold. Therefore, it is necessary to optimize the resin feed system and predict possible defects by CAE analysis. However it is not possible to obtain exact analysis results for the speaker grill by using general shell elements since the heat transfer in the thickness direction which is the dominant factor of the filling stage can not be considered. Therefore, there have been several efforts to simulate the injection molding nature of the speaker grill by using shell elements with an effective thickness which is smaller than the actual thickness of the part. Two empirical values have been recommended for the effective thickness in real practice. One is 50∼70% of the thickness of the speaker grill and another is the gap distance between the adjacent holes. In this paper, CAE analyses of a map pocket with a speaker grill were conducted using shell elements with both of these recommended effective thicknesses, and the predicted flow fronts were compared with the findings from injection molding experiments. The commercial code MOLDFLOW was used for injection molding analysis and an 850 ton injection molding machine was used for experiments.