• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.688-692
• /
• 2000

This study proposed design parameters of opening spring of circuit breaker that cut off the over-current in order to protect the electric device about opening speed using the energy method. We simulated the opening kinetic energy, the potential energy of opening spring and the design parameters of opening spring with respect to opening speed of VCB (Vacuum Circuit Breaker)'s moving contactor which has 24kV 25kA break capacity. From the result of simulation the initial tensional force and the final tensional force of the opening spring chose 107kgf and 282kgf respectively. Through the dynamic analysis using ADAMS, We verified that the opening speed of moving contactor satisfied break capacity of VCB and analyzed opening dynamic characteristics of VCB such as the opening displacement, the opening velocity and the opening acceleration of moving contactor in time domain.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.74-76
• /
• 2006

최근 중 저압용 진공 차단기의 구동 메커니즘으로 영구자석형 조작기(PMA)가 널리 사용되고 있다. 이는 모터 스프링이나 유압 및 공압식 등과 같은 기계식 메커니즘에 비해 성능과 신뢰성에서 우수함을 인정받고 있다. 그러나 기존 영구자석형 조작기에서는 가동자와 영구 자석 사이의 큰 마찰력으로 인한 에너지 손실과 차단부와의 연결 로드에서의 기계적 고장 및 파손이 유발될 수 있다. 본 논문에서는 가동자의 로드에 베어링 타입의 부싱을 장착한 모델을 제안함으로써 이 문제를 해결하고자 한다. 부싱을 이용하여 영구 자석과 가동자 사이의 공극을 확보함으로써 마찰을 감소시키고 기계적 안정성 및 동작 특성 향상을 기대할 수 있다. 유한요소법(FEM)과 시간차분법(TDM)을 이용하여 제안된 모델의 동작 특성을 해석하였고, 이를 기존 모델의 특성과 비교하여 그 우수성을 검증한다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.5
• /
• pp.521-528
• /
• 2009

In these days, biomimetic apprioach in the design and control of robotic system has drawn much attention. The human-being and mammals possess their own feet. Using the mobility of their feet, they are able to walk in various environments such as plain land, desert, swamp, and so on. Previously developed biped robots and four-legged robots did not employ such adaptable foot. In this work, a biomimetic foot mechanism is investigated through analysis of the foot structure of the human-being. This foot mechanism consists of a toe, an ankle, a heel, and some springs replacing the foot muscles and tendons. Using five toes and springs, this foot can adapt to various environments. A mathematical modeling for this foot mechanism was performed and its characteristics were observed through numerical simulation.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.193.2-193.2
• /
• 2012

달착륙선 등과 같은 특수 목적을 위해 제작된 우주용 착륙선에는 착륙 시 전달되는 충격하중이 탑재장비로 전달되지 못하도록 연착륙(soft-landing)을 위한 충격흡수 메커니즘이 구현되어 있어야 한다. 일반적으로 자동차 및 항공기에서는 실린더와 피스톤으로 구성된 유공압식 완충장치를 주로 사용하여, 피스톤 압축으로 실린더 내부 오일 또는 압축공기가 오리피스를 통하여 분출됨에 따라 유체마찰 에너지를 활용한 충격 흡수장치가 일반적이다. 그러나 이와 같은 지상 장비용 유공압식 충격흡수 메커니즘은 진공 및 무중력 우주 환경하에서 오리피스 기능 상실, 유압유 기화 현상 및 극저온/고온 환경에서의 성능저하 등의 문제점으로 인하여 우주용 착륙선 충격완충장치로 적용이 불가능하다. 따라서 기존의 우주용 착륙선의 대부분은 충격에너지를 기계적인 좌굴 소성 변형에너지로 변환하여 충격을 흡수할 수 있도록 알루미늄 허니콤을 주로 많이 사용하여 왔다. 본 연구에서는 진공 및 무중력 우주환경에서 착륙선 충격완충 장치로 적용이 가능하도록 실리콘 포옴과 스프링을 조합하여 구성하였으며, 충격완충 매체로 유압유 및 공압을 대체할 수 있도록 실리콘 포옴을 후방 사출 성형 방식으로 적용하여 오리피스를 통과한 실리콘 포옴의 변형에너지로 충격에너지를 흡수하게 함으로서 착륙 완충효율을 극대화 할 수 있도록 검토하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.3
• /
• pp.196-201
• /
• 2016

This paper analyses the characteristics of a stiffness-based rehabilitation mechanism for improving the function of the elbow joint of a human. We consider an elastic string as a tool for the elbow joint rehabilitation, where the string has been modeled as a linear spring with a stiffness. For effective rehabilitation training by using such a mechanism, we need to analyse the available torque characteristics of the elbow joint according to the stiffness of the string. Through various simulations, the torque pattern and its range of the elbow joint by assigning the stiffness of the string have been identified for a pre-defined trajectory of motion of the elbow joint. Finally, we show that the specified stiffness-based rehabilitation scheme can be used for effective rehabilitation of the elbow joint.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.1
• /
• pp.71-78
• /
• 2014

Door hinges of large refrigerators are required to ensure that the doors open and close smoothly in addition to supporting door weights and enduring the impact loads due to door opening and closing. However, door hinge design is difficult because of complex hinge mechanisms and sensitive structural safety. In this study, the mechanism satisfying the required spring response, space constraints, and structural strength is optimized, and the volume of the outer frame covering the hinge mechanism is minimized for reducing production costs. The entire design process is automated using the PIDO(Progress Integration and Design Optimization) technique, which achieves an efficient design process. Therefore, the frame mass is reduced to 24%, and the mechanism performance and structural stability are improved.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1195-1200
• /
• 2007

It is desirable that the guard robot should be small-sized and light-weighted to increase its portability. In addition, it should be able to overcome a relatively high obstacle to cope with different situations. The jumping robot can reach a higher place more rapidly than other locomotion methods. This research proposes the jumping mechanism based on the conical spring for a small robot. Both the clutch mechanism and conical spring are incorporated into the jumping mechanism. In the clutch mechanism, the spring can be immediately compressed and released by one actuator with the planetary gear train and one-way clutch. The robot equipped with the jumping mechanism can overcome the obstacles which are higher than its height. In this paper, the characteristic of the conical spring for the jumping robot is determined and the small-sized, lightweight jumping mechanism is developed. The validity of the jumping mechanism was verified by various experiments. It is shown that the robot using this mechanism can provide good mobility in the rough terrain.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.3
• /
• pp.331-341
• /
• 2018

This study proposes an integrated serial spring-damper mechanism as a dual pulse generation system. Compared to the traditional dual pulse generation system, which used multiple springs and a damper to generate a dual pulse critical for impact testing of naval equipments, currently used separated serial spring-damper mechanism is comprised of two components: an air spring, and a damper. The proposed mechanism combines the two components into one integrated system with a unique design that lets simply changing the volume and the pressure of the air tank, and the length of the annular pipe adjust the stiffness and damping constants for testing, eliminating the need to have multiple sets of air springs and dampers. Simulations using MatLab and Simulink were conducted to verify the feasibility of this design. The results show the potential of an integrated serial spring-damper mechanism as a more convenient and flexible mechanism for dual pulse generation system.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.838_839
• /
• 2009

차단기는 전력계통에서 고장이 발생한 경우, 고장전류가 퍼져나가는 것을 방지하고 고장전류에 의해 계통에 연결된 다른 기기들이 손상을 입는 것을 방지하는 전력기기이다. 그 중 진공 차단기는 친환경성과 우수한 절연특성으로 배전급 중.저압용 차단기로 널리 사용되고 있다. 차단기는 크게 조작부와 차단부로 구분되는데 진공 차단기의 조작부 메커니즘은 스프링 구동방식과 영구자석형 마그네틱 액츄에이터(PMA)를 사용하여 구동하는 방식으로 나뉜다. 본 논문에서는 진공차단기의 조작부인 영구자석형 마그네틱 액츄에이터(PMA)의 개방.투입 유지력과 동작특성을 유한요소법을 이용하여 해석하였다. 정밀한 해석을 위해 물질의 비선형성을 고려하였으며, 외부회로와 결합한 전자계 해석을 하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.2
• /
• pp.208-219
• /
• 1999

Springs have been employed in a wide range of mechanical systems. This work deals with the concept of an adaptable spring mechanism which can arbitrarily modulate its spring characteristics. The adaptable spring is desired for enhancing performances of various mechanical systems employing springs. We demonstrate that such adaptable springs can be realized by adapting anthropomorphic musculoskeletal structures of the human upper-extremity, which possesses highly nonlinear kinematic-coupling among redundant muscles existing in its structures. This phenomenon has been explained by several human arm models. Based on the analysis results, we propose multi-degree-of-freedom spring mechanisms resembling the musculoskeletal structure of the human upper-extremity, and verifiy the applicability of these mechanisms through simulation.