• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.245-247
• /
• 2011

A new spray carnation cultivar 'Leo' was released by the National Institute of Horticultural and Herbal Science in 2003. A cross was made between spray cultivar 'Ballantyne' and 'West peachy' in 1999. After investigation of the characteristics four years (from 2001 to 2003), it was finally selected in 2003. 'Leo' is a spray cultivar with light yellow color for a cut flower. The main characteristics are multi branching, long vase life and early flowering habit than 'Diamond'(control). It has medium resistance to Fusarium wilt and 9 days vase life.

• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.196-200
• /
• 2008

A new spary chrysanthemum (Dendranthema grandiflorum) cultivar 'Pinky' was bred from a cross between 'Rima' and 'Yen'. Progenies were investigated from 2004 to 2006 under shading culture in spring and retarding culture in autumn and the promising line was selected based on the performance of year-round production, white rust resistance and vase life. Pinky flowered around 20 October, and year-round production was possible by shading and lighting. Its flower was 3.1 cm in diameter, and had 38.4 petals and 26.8 flowers per stem in autumn. Its petal was narrow (0.4 cm) and pink with green in color at the flower center. Days to flower from short-day start for 'Pinky' was about 47 in spring. 'Pinky' showed a vase life of 20.9 days in autumn. This cultivar was commercially registered in 2007. 'Pinky' would be suitable for culture under the greenhouse and rain shelter condition in Korea.

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.606-610
• /
• 2010

A new cultivars Dendranthema grandiflourm 'Dream Moon' was developed at Gyeonggi-do Agricultural Research and Extension Services (GARES), Korea in 2008. The cultivar 'Dream Moon' was derived from a cross between 'Patra', a spray cultivar with yellow single type, and 'Sei-rosa', a spray cultivar with pink single type in 2005. The cultivar has single type flowers with pink petals. Trial evaluation was conducted from 2006 to 2008 for a shading cultivation in summer and a retarding cultivation in spring. The flowering time of 'Dream Moon' is late October, and year-round flowering is possible by shade or light treatment. The diameter of flower is 56.0 mm. Numbers of flowers per stem and petals per flower are 16.4 and 24.6, respectively. After investing of specific characters from 2006 to 2008, it was finally selected and named 'Dream Moon'. It has resistance to white rust and the vase life is about 20.7days in autumn season.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.490-494
• /
• 2008

A new spary chrysanthemum (Dendranthema grandiflorum) cultivar 'Eye Ball' was developed from a cross between 'Rima' and 'Yen' followed by selections of seedlings and lines at the Flower Rearch Institute, Gyeongnam Agricultural Research and Extension Services (ARES) from 2002 to 2006. Its characteristics were investigated three times from 2004 to 2006 under forcing culture in spring and retarding culture in autumn. The natural flowering time of 'Eye Ball' was October 20th, but year-round production was possible by shading and lighting. Its flower was 3.1cm in diameter, and had 38.4 petals and 26.8 flowers per stem in autumn. Its petal was narrow (0.4 cm) and pink with green in color at the flower center. To flower in the short day condition, for 'Eye Ball' was about 47 days in spring, and 'Eye Ball' showed a vase life of 20.9 days in autumn. This cultivar was registered for a commercialization in 2007. 'Eye Ball' would be cultured under the greenhouse and rain shelter condition in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.425-430
• /
• 2019

Zinc coatings are widely used because of their environmental friendliness and high performance. In general, the coating temperature is a major factor in determining the coating layer thickness and coating quality. In the case of a zinc coating, a uniform and appropriate coating temperature is required. In this study, a thermal flow simulation of the air flow was performed to analyze the temperature distribution of a zinc spray coating room in a natural convection state. Using SolidWorks, modeling was performed for two spray coating rooms, a preheating room, and a drying room, and a thermal flow coupled analysis was performed using ANSYS-FLUENT. As a result of the analysis, the temperature distribution characteristics in the spray coating rooms were determined. It was found that the present temperature was below the target temperature of $25^{\circ}C$. Simulations were conducted for two different boundary conditions (one with a heater added and another with the open part closed). The simulation results show that the method of closing the open part is better than adding the heater.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.3
• /
• pp.57-61
• /
• 2016

In order to protect the solar cells from the moisture and oxygen, we evaluated the electrical and optical properties for the $Cu(In,Ga)Se_2$ (CIGS) solar cells which were prepared by the spray coating method. Generally, the EVA (ethylene-vinyl acetate) films are laminated to protect the CIGS flexible solar cells, which results in a high cost process due to complicated devices. In this study, we tried to prepare the protection layers of the flexible CIGS flexible solar cells by using spray coating method instead of conventional laminating films in order to reduce the device weight as well as the process time. The CIGS solar cells with spray coating method showed an enhanced efficiency than the before treated sample (2.77% to 2.93%) and relatively proper water vapor transmission rate of the solar cells about 62.891 gm/[$m^2-day$].

• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.159-163
• /
• 2008

A New spary chrysanthemum (Dendranthema grandiflorum) cultivar 'Water Fog' was bred by open pollination of 'Angaesoguk'. Its characteristics were investigated three times from 2004 to 2006 under forcing culture in spring and retarding culture in autumn. The natural flowering time of 'Water Fog' was 24 October, but year-round production was possible by shading and lighting. It had flower diameter of 2.3 cm, 46.5 petals and 34.4 flowers per stem in autumn. The petal was narrow(0.4cm) and the color of petal was white with presence of green at flower center. Days to flower from short-day start for 'Water Fog' was about 48 in spring. 'Water Fog' showed the vase life of 22.6 days in autumn. This cultivar was registered for a commercialization in 2007. 'Water Fog' would be cultured under greenhouse and rain shelter condition in Korea.

• Journal of Welding and Joining
• /
• v.5 no.2
• /
• pp.27-34
• /
• 1987

The characteristics of arc sprayed layer were studied with hardness test and microstructural observation. The erosion resistance of arc sprayed layer was also evaluated using a method of steel ball blasting test which was proposed in this study as a test method for measuring the erosion properties in the impact wear condition. By an impact of the molten droplets on the redeposited substrate, lamella structure was formed which contains laminated oxide layers, fissures, and porosities. As a result of mechanical tests, it was shown that the sprayed specimen showed higher hardness than the substrate, but it resulted in higher erosion rate than the substrate. The poor erosion property obtained with a sprayed coating was considered to be attributable to easy flaking off the the layers laminated with brittle oxide layers.

• Journal of ILASS-Korea
• /
• v.16 no.1
• /
• pp.37-43
• /
• 2011

The present study conducted computational simulation for multiphase flow in the flame spray coating process with commercially available Ni-Cr powders. The flows in a flame spray gun is characterized by very complex phenomena including combustion, turbulent flows, and convective and radiative heat transfer. In this study, we used a commercial computational fluid dynamics (CFD) code of Fluent (ver. 6.3.26) to predict gas dynamics involving combustion, gas and particle temperature distributions, and multi-dimensional particle trajectories with the use of the discrete phase model (DPM). We also examined the effect of particle size on the flame spray process. It was found that particle velocity and gas temperature decreased rapidly in the radial direction, and they were substantially affected by the particle size.

• Journal of Technologic Dentistry
• /
• v.30 no.1
• /
• pp.149-153
• /
• 2008

1. 석고를 보관할 때는 건조한 곳에 밀봉하여 보관해야 한다. 따라서 용기 포장을 일단 개봉하면 밀봉용기에 담아 보관하는 것이 바람직하다. 2. 혼수비는 석고의 기계적 성질에 영향을 주기 때문에 정상적인 혼수비를 지켜야 하며, 모형은 경화된 후에도 물과 닿지 않도록 주의한다. 3. rubber인상재의 경우 비눗물을 붓이나 스프레이타입으로 뿌려준 후 흐르는 물에 씻고, 물기를 제거한 후 석고를 주입하면 기포 발생을 줄일 수 있다. 4. 석고를 인상체내에 너무 높이 올려쌓아도 무게로 인해 변형 된다. 5. 석고가 tray밖으로 흘러나가도 변형된다. (공기와 접촉되어 경화된 석고가 아직 경화되지 않은 석고를 잡아당김.) 6. 인상체에서 분리한 모형은 요오드 스프레이를 제조자 설명서에 따라 뿌려 소독한다. 7. 교합기에 모형 부착 시 base끼리 bar나 성냥개비등 다른 고정장치로 고정 시켜야하고, 교합기를 위에서 눌러주어야 한다. 그렇지 않을시 교합관계가 높아질 수 있다. 8. 재료를 구입시 물리적 특성이 많이 기재되어 있는 제품을 선택한다.