• Journal of Advanced Navigation Technology
• /
• v.3 no.1
• /
• pp.52-59
• /
• 1999

Digital microwave wideband receiver including linear amplifier, analog-to-digital converter(ADC) and digital signal processor is able to analyze its performance using sensitivity and dynamic range of system. Determination of gain, third-order intermodulation products and ADC characteristics and design criteria for the linear amplifier chain is essential problem for sensitive and dynamic range. Also, if there are two signals with frequencies very close, digital signal processor must be able to separate the two signals. In this paper, we measured dynamic range as gain was changed and determined gain value for the proper sensitivity and dynamic range and high resolution spectrum estimation was used to separate two close signals.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.143-143
• /
• 2000

MEIS를 이용하여 Cu3Au(100)에서 단원자층 분해능을 얻기 위한 연구를 하였다. 우선 수소이온을 이용한 첫째층과 셋째 Au층의 분리 시도는 extremely glancing exit angle 등 극한의 산란조건에서도 성공하지 못하였다. 깊이 분해능을 정해주는 electronic 에너지 손실을 극대화기 위해 수소이온 대신 질소 이온을 사용하여 에너지 스펙트럼을 측정해 본 결과, 표면 Au 층과 표면 셋째 Au 층을 구분할 수 있었다, <110>으로 정렬된 조건에서는 셋째 층의 Au 원자들이 완전히 shadow cone 내부에 존재하여 관측되지 않지만 9.75$^{\circ}$tilt한 경우 셋째 층의 Au 원자들이 shadow cone 바깥으로 나오게 되어 첫째 층과 셋째 층이 확실히 분리되어 측정되었다. 이 연구에서 MEIS로 단원자층의 분해능을 얻는데 성공하였다. 이러한 단원자층 분해능으로 시료의 온도변화에 따른 표면 첫째 층의 Au 의 조성변화를 관찰하였고 이를 전산 모사 하였다. 이 결과 벌크 전이 온도인 39$0^{\circ}C$이하에서 표면 첫째 층 Au의 조성이 감소하는 것을 관찰하였고 이러한 감소는 45$0^{\circ}C$근처까지 계속되었으며, 다시 온도를 실온으로 낮추면 본래의 질서화된 상태로 되돌아감을 확인하였다. 그리고 이를 전산 모사 한 결과, 표면 첫째 층의 Au가 표면 둘째 층으로 이동해 감을 알 수 있었다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.05a
• /
• pp.51-54
• /
• 2002

본 논문은 글자 문서를 배경으로 사용자의 손가락 이동에 의하여 일정한 영역을 그린 후, 영역내의 한글영상을 편집 가능한 에디터에 출력하는 시스템을 구현하였다. 영상의 전처리 단계에서는 문서 배경과 손영역을 분리하고 최대 원형 이동법을 이용하여 손의 무게 중심점을 추출한다. 원형 패턴 벡터 알고리즘을 사용하여 손을 인식한 후, 거리 스펙트럼으로 손가락 위치를 찾는다. 손가락의 움직임에 의해 선택되어진 문자 영역을 추출한 후, 한글 자소 간 히스토그램을 이용하여 추출된 문자 이미지 영역에서 문자단위로 분할하고 다양한 크기의 문자를 표준화한다. 퍼지 추론을 적용한 원형 패턴 벡터 알고리즘을 이용하여 표준 패턴문자와 입력문자의 특징벡터를 비교하여 문자를 인식하게 함으로써 사용자가 원하는 영역의 문자들을 수정 가능한 문서로 변환하였다

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.2818-2820
• /
• 1999

MRI 촬상증의 체동에 의해 화상위에 나타나는 아티팩트를 제거하는 알고리즘으로서, 종래의 발견적인 측차근사 반복법에 의한 제거방법과는 달리, MRI 촬상과정의 해석에 근거해서 도출된 MRI 본래의 성분과 체동성분을 분리하는 구속조건을 이용하는 알고리즘을 제안한다. 이때의 체둥은 위상엔코딩 축인 Y 방향의 체동만을 고려하며, 그 체동의 영향은 MRI 신호의 위상변동으로 나타난다. 일반적으로 위상에는 화상자신의 위상성분과 체동성분이 흔합되어 있지만, 두뇌부위 등의 양단부위에 접하는 Y 방향의 한 라인의 밀도분포는 근사적인 대칭으로 간주할 수 있다. 이 한 라인의 위상스펙트럼, 즉, 화상자신의 성분은 직류성분만으로 구성되며, 체동성분은 일반적으로 모든 주파수에 분포한다. 이러한 구속조건에 기초한 근거가 명확한 아티팩트의 제거방법을 정식화 하며 시뮬레이션에 의해 본 알고리즘의 유효성을 확인한다.

• Journal of the Korean Chemical Society
• /
• v.39 no.7
• /
• pp.501-507
• /
• 1995

The electronic structure of cis-$[Cr(cyclam)Cl_2]Cl$ has been investigated by the emission and excitation spectroscopy at 77K, and infrared and visible spectroscopy at room temperature. The ten electronic transitions due to spin-allowed and spin-forbidden are assigned. The zero-phonon line in the excitation spectrum splits into two components by $139\;cm^{-1}$, and it can be reproduced by modern ligand field theory. According to the results of ligand field analysis, we can confirm that nitrogen atoms of the cyclam ligand have a strong ${\sigma}$-donor character, but chloride ligand has weak ${\sigma}-$ and ${\pi}-$donor properties toward chromium(III) ion.

• Journal of the Korean Vacuum Society
• /
• v.10 no.3
• /
• pp.350-355
• /
• 2001

We have investigated characteristics of ZnSe epilayer grown by molecular beam epitaxy(MBE) on semi-insulating(SI) GaAs by using surface photovoltage(SPV). The measurements of SPV were performed with illumination intensity and modulation frequency. The bandgap energy of ZnSe epilayer was determined from derivative surface photovoltage (DSPV). The five states were observed at room temperature(RT), and those states relate to the impurity and defect formed hetero-interface of ZnSe and GaAs during the sample growth. The observed states represented as a tendency of typical extrinsic transition on the increasing illumination intensity. The 1s and 2s signals related to the excitonic absorption were not observed at RT, but those were presented with the splitted of two peaks in the SPV at 80 K. From the modulation frequency dependence, we obtained the junction conductance and capacitance of the sample.

• Journal of the Korean Vacuum Society
• /
• v.16 no.6
• /
• pp.458-462
• /
• 2007

Spectroscopic ellipsometry is an excellent technique for determining dielectric function. To obtain critical point energy, standard analytic critical point expression is used conventionally for second derivatives of dielectric function which might increase high frequency noise than signal. However, reciprocal-space analysis offers several advantages for determining critical point parameters in optical and other spectra, for example the separation of baseline, information, and high frequency noise in low-, medium-, high-index Fourier coefficient, respectively. We used reciprocal Fourier analysis for removing noise and determining critical point of ZnCdSe alloy.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.6
• /
• pp.690-699
• /
• 2014

Jet engine modulation(JEM) is a technique used to identify the jet engine type from the radar target signature modulated by periodic rotation of the jet engine mounted on the aircraft target. As a new approach of JEM, this paper proposes an automatic algorithm for extracting the jet engine information. First, the rotation period of the jet engine is yielded from auto-correlation of the JEM signal preprocessed by complex empirical mode decomposition(CEMD). Then, the final blade number is estimated by introducing the DM(Divisor-Multiplier) rule and the 'Scoring' concept into JEM spectral analysis. Application results of the simulated and measured JEM signals demonstrated that the proposed algorithm is effective in accurate and automatic extraction of the jet engine information.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.131-137
• /
• 2024

Aerodynamic noise generated by the surrounding flow of a train traveling at high speed affects both outdoor and indoor noise. This study's goal is to develop a test method to measure and quantitatively evaluate aerodynamic noise through pressure perturbation data on the train surface. To accurately evaluate aerodynamic noise, it is important to separate and evaluate the compressive and incompressible pressure fluctuations mixed in the acquired surface pressure fluctuation data. This is because the noise transmission characteristics of the two pressure fluctuations are different. First, the installation length and interval of the microphone were determined to acquire surface pressure fluctuation data, and wavenumber-frequency analysis was performed to separate incompressible pressure fluctuation and compressible pressure fluctuation to obtain a sound pressure level spectrum. Finally, as a result of comparing the test results measured in the train head and trail, It was confirmed that the pressure fluctuation on the train head surface was greater than that on the tail.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.3
• /
• pp.70-78
• /
• 2000

In this study, a new method for canceling MRI artifacts through the motion translation of image plane is presented Breathing often makes problems in a clinical diagnosis. Assuming that the head moves up and down due to breathing, rigid translational motions in only y(phase encoding axis) direction are treated Unlike the conventional Iterative phase retrieval algorithm, this method is based on the MRI imaging process and analyzing of Image property A new constraint condition with which the motion component and the true image component in the MRI signal can be separated by a simple algebraic operation is extracted After the x(read out) directional Fourier transformation of MRI signal is done, the y(phase encoding) directional spectrum phasing value is Just an algebraic sum of the Image component and the motion component Meanwhile, as It is known that the density of subcutaneous fat area is almost uniform in the head tomographs, the density distribution along a y directional line on this fat area is regarded as symmetric shape If the density function is symmetric, then the phase of spectrum changes linearly with the position Hence, the departure component from the linear function can be separated as the motion component Based on this constrant condition, the new method of artifact cancellation is presented Finally, the effectiveness of this algorithm IS shown by using a phantom with simulated motions.