• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.4
• /
• pp.353-358
• /
• 2014

This paper reports a simple, yet effective 1-step surface modification method for stainless steel. Electrochemical etching in dilute Aqua Regia forms hierarchical micro and nanoscale structure on the surface. The surface becomes highly hydrophobic (${\sim}150^{\circ}$) as a result of the etching in terms of static contact angle (CA). However the liquid drops easily pinned on the surface because of high contact angle hysteresis (CAH), which is called a "petal effect": The petal effect occur because of gap between surface microstructures, despite of intrinsic hydrophobicity of the base material. The pore size and period of surface structure can be controlled by applied voltage during the etching. This method can be applied to wide variety of industrial demand for surface modification, while maintaining the advantageous anti-corrosion property of stainless steel.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.848-851
• /
• 2008

유리섬유 및 폴리에스테르와 같은 섬유질 흡음재의 단점을 보완하기 위하여 다공성 알루미늄과 같은 강체 흡음재가 개발되고 있다. 본 연구에서는 스테인리스 스틸을 이용한 다공성 강체에 대하여 수직입사 흡음성능을 조사하였다. 밀도, 두께, 세부 프로파일 등에 따른 성능비교를 위하여 서로 다른 9개의 시험편의 성능을 측정하였다. 측정결과 밀도가 낮고 두께가 두꺼운 다공성 강체의 흡음성능이 다소 높은 것으로 나타났으며, 두께의 증가에 따라 중저주파수 대역의 흡음특성이 증가되었다. 배후 공기층이 형성되는 경우 중 저주파수 대역의 흡음성능이 매우 향상되는 것으로 나타났다. 또한 접착제가 사용된 실험편에 배후공기층이 형성되는 경우 전주파수 대역에서 매우 평탄한 수직입사 흡음특성을 갖는 것으로 나타났다. 향후 스테인리스 스틸 다공성 강체가 방음시설물, 흡음.확산용 내장재 등으로 사용될 수 있을 것으로 판단된다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.226-227
• /
• 2015

인쇄회로기판에 솔더 페이스트를 인쇄하기 위하여 스테인리스 스틸 (Stainless steel, (i.e., SUS)) 재질의 솔더 페이스트 인쇄용 스텐실 마스크가 사용되고 있다. 하지만, 솔더 페이스트가 스텐실 마스크에 쉽게 달라붙기 때문에 솔더 페이스트에 의한 오염으로 인하여 생산성이 떨어지며, 스텐실 마스크 수명이 짧아지는 문제점이 발생되고 있다. 이를 해결하기 위하여 본 연구에서는 스텐실 마스크 표면에 소수성을 가진 고분자 코팅을 함으로써 솔더 페이스트가 쉽게 붙는 것을 억제하고자 하였다. 더욱 중요하게 스텐실 마스크에 전해연마 및 플라즈마 처리를 통한 표면 개질을 부여함으로써 고분자 코팅의 내구성을 향상시키고자 하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.29-38
• /
• 2022

Recently, seismic design for anchors is required, which are used for connecting structural members and non-structural and structural members. In this study, pull-out tests on the new expansion anchors which have been developed for cracked concrete. The anchors of 12 mm and 20 mm diameters were tested which are commonly used. Experiments were conducted on non-cracked concrete and cracked concrete to evaluate the seismic performance of the post-installed anchor. The experimental method complies with the specified test protocol (KCI, 2018). Three experimental variables are included in this study: presence of cracks, concrete compressive strength, and effective embedment depth. The strength of the anchors was evaluated with the characteristic capacity K_5% determined from the test results incorporated with the safety of 5% fractile. The characteristic capacity K_5% of the non-cracked and cracked concrete specified in KDS 14 20 54 are 9.8 and 7.0, respectively. Test results show that all groups except the three groups have higher characteristic capacity K_5% than the KDS code and the nominal strengths of the tested anchors can be determined with the obtained characteristic capacity K_5%.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2008.11a
• /
• pp.39.2-39.2
• /
• 2008

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.04a
• /
• pp.41-41
• /
• 2001

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.290.1-290
• /
• 2001

• 한국전기화학회:학술대회논문집
• /
• 1999.04a
• /
• pp.41-41
• /
• 1999

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.215-219
• /
• 2020

In this study, nanoporous iron oxide layers were fabricated by the anodization of 304 series stainless steel. K₂HPO₄/glycerol solution was used as an electrolyte for anodization. We investigated the anodization behavior according to various parameters such as electrolyte concentration, reaction temperature, applied voltage, and reaction time. As a result of anodization, we confirmed that the anodic growth rate of oxide layer on 304 series stainless steel increased with increasing the electrolyte temperature and applied potential. In order to form well-ordered porous nanostructures, the electrolyte temperature was at 160 ℃, and the applied potential was at 30 V in 10 wt% K₂HPO₄/glycerol electrolyte.

• Korean Chemical Engineering Research
• /
• v.57 no.4
• /
• pp.519-524
• /
• 2019

Even though stainless steel foil is not a highly efficient material for film-type solar cell, it has strong passivation capability without additional process. In this study, silicone resin was employed during a-Si:H thin film solar cell fabrication for the purpose of planarization and electrical insulation. In the first stage of process, silicone resin was coat onto the stainless steel (STS) using spin coater with thickness of $2{\sim}3{\mu}m$ and followed by aluminum deposition using ion beam application. Unexpectedly buckling was formed during aluminum deposition process. After subsequent fabrication processes, solar cell performance was evaluated. In voltage-current data, slight increase of cell performance was obtained and interpreted by the increase of light scattering.