• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.85.1-85.1
• /
• 2005

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권6호
• /
• pp.681-686
• /
• 2007

The flow analysis was made by applying the turbulent models in the scroll volume of centrifugal compressor. The $k-{\varepsilon}.\;k-{\omega}$, Spalart-Allmaras and reynolds stress models are used in which the hybrid grid is applied for the simulation. The velocity vector the Pressure contour. the change of residual along the iteration number. and the dynamic head are simulated by solving the Navier-Stokes equations for the comparison of four example cases.

• 대한기계학회논문집B
• /
• 제30권3호
• /
• pp.222-229
• /
• 2006

Three dimensional turbulent flow in the scroll volute of centrifugal compressor has been numerically investigated in this paper by solving the Navier-Stokes equations and $\kappa-\varepsilon$ equation model. The computational grid for the flow field of the scroll volute has been constructed based on the multi-block grid concept, which is good to avoid the central grid singularity as well as to promote grid stretching toward the volute wall. Numerical result has been obtained for both the two- and three- dimensions. For the latter flow, result of the scroll volute flow is compared with that of the straight conical volute. This comparison has sorted out the characteristic features of the three-dimensional scroll-type volute flow of centrifugal compressor.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.123-127
• /
• 1999

This paper suggests the establishment of high-accuracy and high-efficiency machining method of scroll shape workpiece by using the feed control method. The cutting paths for machining the inside and outside surfaces of the scroll-shape workpiece are calculated, and the calculation method of the cutting chip areas based on the coordinate of the base circle is shown. A feed control method is proposed for a constant cutting area and cutting force. By machining test of scroll shape workpiece, The machined accuracy of wrap, tool wear, and surface roughness are evaluated. By this method, Reduction of the machining time and large increase of the efficiency can be expected.

• 대한기계학회논문집B
• /
• 제37권5호
• /
• pp.531-538
• /
• 2013

원심압축기에서 볼류트는 임펠러와 디퓨저를 통해 나온 유동을 모아주는 역할을 한다. 압축기의 운전점에 따라 볼류트 내부 발생하는 와류의 세기나 패턴이 달라진다. 압축기 설부에서는 압축기의 운전점에 따라 재유입 유동의 특성이 변화하고, 이러한 특성은 압축기의 성능 및 탈설계점에서의 특성을 이해하는데 중요한 역할을 한다. 본 연구에서는 PIV를 이용하여 압축기의 운전점에 따라 볼류트 내부에 발생하는 스크롤 와류를 측정하였으며, 압축기 설부 근처에서 유동장을 측정한 결과 유량계수가 감소할수록, 설부 측에 발생하는 박리영역이 줄어들고 압축기로 재유입되는 유동이 커지는 것을 알 수 있다.