• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.1-7
• /
• 2022

A simulated radar terrain scan data generation method is employed for terrain following. This method scans the discrete terrain by sequentially radiating beams from the radar to the desired scan area with the same azimuth but varying elevation angles. The terrain data collected from the beam is integrated to generate the simulated radar terrain scan data, which comprises radar-detected points. However, these points can be located far from the beam centerline when the radar is far from them due to beam divergence. This paper proposes a geometry-based terrain scan data generation method for analysing simulated radar terrain scan data. The method involves detecting geometric points along the beam centerline, which forms the geometry-based terrain scan data. The analysis of the simulated radar terrain scan data utilising this method confirms that the beam width effects are accounted for in the results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.202-208
• /
• 2019

In this study, an active element pattern (AEP) of a printed dipole was analyzed in 1D and 2D arrays. First, an AEP of the printed dipole was obtained using the simulation in the 2D infinite array. The scan blindness in the 2D array occurred in the E-plane direction at around ${\pm}36^{\circ}$; however, it was barely observed in the 1D array. To analyze the cause of the scan blindness in the 2D array, the dispersion properties of a unit cell was obtained and compared with the scan blindness by frequency change. The difference between the scan blindness of the 1D and 2D arrays was clarified using the comparison of the Q value in the unit cell in the 1D and 2D arrays. Then, the coupling of the electric field in the E-plane direction was observed when nine elements were separated between the two ports in a linearly arranged dipole structure. Finally, the printed dipole array was fabricated, and an AEP was measured for the $11{\times}1$ and $11{\times}3$ sub arrays. The proposed theory was verified using these observations and by comparison with the simulation results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.536-539
• /
• 2017

본 논문에서는 스캔된 악보 영상을 ART2 알고리즘을 이용하여 음자리표를 인식하고 자동으로 연주하는 방법을 제안한다. 제안된 자동 악보 인식 방법은 스캔된 영상에서 이진 영상으로 변환하기 위해서 평균 이진화 기법을 적용한다. 평균 이진화 기법이 적용된 영상에서 수평 히스토그램을 이용하여 악보 영상의 오선을 제거한다. 제거된 악보 영상에서 8방향 윤곽선 추적 알고리즘을 이용하여 음표를 탐색하여 추출하고 추출된 음표를 ART2 알고리즘에 적용하여 쉼표와 음표를 분류한다. 분류된 음표를 이용하여 악보를 인식하고 인식된 악보를 이용하여 연주한다. 실제 악보를 스캐너로 획득한 악보 영상을 대상으로 실험한 결과, 단순한 악보 영상에서 효과적으로 악보가 인식되고 연주할 수 있는 것을 확인하였다.

• Tunnel and Underground Space
• /
• v.26 no.1
• /
• pp.46-58
• /
• 2016

In this study, a LIDAR laser scanner was used to scan a rock slope around Mt. Gwanak and to produce point cloud from which directional information of rock joint surfaces shall be extracted. It was analyzed using two different algorithms, i.e. Ball Pivoting and Wrap algorithm, and four sampling intervals, i.e. raw, 2, 5, and 10 cm. The results of Fuzzy K-mean clustering were analyzed on the stereonet. As a result, the Ball Pivoting and Wrap algorithms were considered suitable for extraction of rock surface orientation. In the case of 5 cm sampling interval, both triangulation algorithms extracted the most number of the patch and patched area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6B
• /
• pp.377-386
• /
• 2005

Recently, to increase throughput per hour on real-time disk scheduling, a lot of algorithms that apply SCAN technique to EDF(Earliest Deadline First) that is representative real-time disk scheduling algorithm are studied. However, existing disk scheduling algorithms have several limitations because they consider continuous I/O requests when create SCAN group. Also, because SCAN technique was fixed direction, the existing algorithms have shortcoming that there are a lot of time damages. This paper proposes a new real-time disk scheduling algorithm based on the insertion technique and the two-way SCAN technique to solve the problems of the exiting real-time disk scheduling algorithms in hard real-time system. The simulation result shows that, when using our techniques, the disk throughput and the number of serviceable I/O requests are enhanced.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.284-287
• /
• 2003

본 논문은 시각 장애인을 위해 양면 인쇄된 점자를 스캐너를 통해서 읽어 들인 후, 영상 내의 잡음과 같은 미세 정보를 제거하는 전처리과정을 거친다 스캔한 영상을 임계값을 이용한 클리핑으로 이진영상을 만든 후 영상의 특징을 추출한다. 추출된 특징은 점자의 앞면과 뒷면으로 분류할 수 있다. 점자 앞면의 특징이 아래반원으로 나타나며 이러한 특징을 이용한 검출필터를 만들어 점자의 앞면만을 추출해낸다. 영상을 각각 수직방향, 수평방향으로 투영시켜 점자영상 분할을 위한 거리를 계산, 자간격과 줄간격을 구해 ½되는 지점에 선을 그어 분할한다. 분할된 점자 형태소를 낱자로 인식한다.

• Journal of Broadcast Engineering
• /
• v.17 no.2
• /
• pp.316-324
• /
• 2012

In this paper, a novel descreening method using HOG(histogram of gradient)-based adaptive smoothing filter is proposed. Conventional edge-oriented smoothing methods does not provide enough smoothing to the halftone image due to the edge-like characteristic of the halftone noise. Moreover, clustered-dot halftoning method, which is commonly used in printing tends to create Moire pattern because of the intereference in color channels. Therefore, the proposed method uses HOG to distinguish edges and the amount of smoothing to be performed on the halftone image is then calculated according to the magnitude of the HOG in the edge and edge normal orientation. The proposed method was tested on various scanned halftone materials, and the results show that it effectively removes halftone noises as well as Moire pattern while preserving image details.

• Journal of Korea Multimedia Society
• /
• v.15 no.11
• /
• pp.1358-1368
• /
• 2012

A tag sequence estimation scheme is to estimate the physical sequence of passive RFID tags that are linearly spread using the movement of a RFID reader. Since RFID readers communicate with the passive tags by very weak radio waves, scanning passive tags are unstable. In this paper, we applied round-trip scanning of a reader to enhance the tag sequence estimation. Proposed scheme first determines the turning point of the reader movement, and then estimates the sequence of the tags using the tag sets scanned in each read cycles. Test experiments show that the proposed scheme can improve the estimation accuracy.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.207-217
• /
• 1999

When the feed of an offset reflector antenna is displaced from the focal point, the phase distortion results in the aperture field distribution, which in turn gives rise to a deviation of maximum beam, a decrease in gain, and an increase in sidelobes. In order to study these scan characteristics, an offset reflector antenna with the defocused feed is analyzed by a series expansion method using the Zernike polynomials, which can be used to calculate radiation pattern fast and exactly. And from the analyzed results, scan loss data in terms of reflector geometry are presented. And also, the BDF (beam deviation factor) expression is derived with offset reflector configuration analytically, and calculated results and simple formula of BDF are presented for determining beam deviation characteristics.

• Tunnel and Underground Space
• /
• v.19 no.1
• /
• pp.1-10
• /
• 2009

Site characterization for structural stability in rock masses mainly involves the collection of joint property data, and in the current practice, much of this data is collected by hand directly at exposed slopes and outcrops. There are many issues with the collection of this data in the field, including issues of safety, slope access, field time, lack of data quantity, reusability of data and human bias. It is shown that information on joint orientation, spacing and roughness in rock masses, can be automatically extracted from LIDAR (light detection and ranging) point floods using the currently available Split-FX point cloud processing software, thereby reducing processing time, safety and human bias issues.