• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.127-130
• /
• 2003

4-bit 강유전체 위상변위기를 이용하여 10 GHz, 상온에서 작동하는 위상배열 안테나를 설계 및 제작하였다. 이 안테나는 빔 스캔을 위하여 전압에 대한 비선형특성을 보이는 강유전체 Bal-xSrxTiO3 (BST)를 기본으로 하는 위상변위기를 이용하였다. 우리는 펄스레이져 증착법으로 MgO (001) 기판위에 걸맞게 증착된 BST 박막을 일반적인 사진공정과 식각법을 이용하여 동일평판형 전극을 가진 위상변위기를 만들었다. 일반적인 동일평판형 강유전체 위상변위기의 경우 연결 전송선로의 임피던스와의 차이로 인해 반사손실과 이로 인한 부가적인 삽입손실이 발생한다. 이런 손실들을 줄이기 위해 입력과 출력 포트에 임피던스 매칭을 하였다. 이렇게 테이퍼링되어 만들어진 동일평판형 위상변위기는 이전의 구조에 비해 반사 손실과 삽입 손실 값에서 각각 약 10, 2 dB 정도씩의 개선을 보였다. 이 구조로 전송선로의 길이를 길게하여 만든 1-bit 강유전체 위상변위기는 10 GHz, 150 V의 전압변화에서 180도의 차등위상변위를 보였으며 최대 삽입손실과 최대 반사손실은 각각 약 10 dB, 20 dB 이다. 안테나 모듈은 4개의 마이크로스트림 패치 안테나와 4개의 강유전체 위상변위기로 이루어졌는데 10 GHz, 150 V의 전압변화에서 약 15도의 빔 스캔을 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.9 s.351
• /
• pp.59-63
• /
• 2006

With the increasing complexity of VLSI devices, more complex faults have appeared. Many methods for diagnosing the single stuck-at fault have been studied. Often multiple defects on a foiling chip better reflect the reality. So, we propose an efficient diagnosis algorithm for multiple stuck-at faults. By using vectorwise intersections as an important metric of diagnosis, the proposed algorithm can diagnose multiple defects using single stuck-at fault simulator. In spite of multiple fault diagnosis, the number of candidate faults is also drastically reduced. For fault identification, positive calculations and negative calculations based on variable weights are used for the matching algorithm. Experimental results for ISCAS85 and full-scan version of ISCAS89 benchmark circuits prove the efficiency of the proposed algorithm.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.1
• /
• pp.79-87
• /
• 2021

The digital workflow of optical impressions by the intraoral scanner and CADCAM manufacture of dental prostheses is actively developing. The complex process of traditional impression taking, definite cast fabrication, wax pattern making, and casting has been shortened, and the number of patient's visits can also be reduced. Advances in intraoral scanner technology have increased the precision and accuracy of optical impression, and its indication is progressively widened toward the long span fixed dental prosthesis. This case report describes the long span implant case, and the operator fully utilized digital workflow such as computer-guided implant surgical template and CAD-CAM produced restoration after the digital impression. The provisional restoration and customized abutments were prepared with the optical impression taken on the same day of implant surgery. Moreover, the final prosthesis was fabricated with the digital scan while utilizing the same customized abutment from the provisional restoration. During the data acquisition step, stl data of customized abutments, previously scanned at the time of provisional restoration delivery, were imported and automatically aligned with digital impression data using an 'A.I. abutment matching algorithm' the intraoral scanner software. By using this algorithm, it was possible to obtain the subgingival margin without the gingival retraction or abutment removal. Using the digital intraoral scanner's advanced functions, the operator could shorten the total treatment time. So that both the patient and the clinician could experience convenient and effective treatment, and it was possible to manufacture a prosthesis with predictability.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.4
• /
• pp.575-582
• /
• 2013

This paper proposes a map building using the ICP algorithm based robot localization prediction. Proposed method predicts a robot location to dead reckoning, makes a map in the ICP algorithm. Existing method makes a map building and robot position using a sensor value of reference data and current data. In this case, a large interval of the difference of the reference data and the current data is difficult to compensate. The proposed method can map correction through practical experiments.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.157-158
• /
• 2009

본 논문에서는 움직임 추정을 위한 탐색 영역내의 스캔 방법을 움직임 벡터가 나올 확률에 근거하여 가변적으로 적용하여 불필요한 후보 블록을 제거하는 PDE(patial distortion elimination) 기반의 고속 블록 매칭 알고리즘을 제안한다. 제안한 방법은 기존의 방법보다 불필요한 계수를 효율적으로 제거하기 위하여 탐색 영역 안에서 움직임 벡터가 존재 할 확률이 가장 높은 영역은 전영역 탐색을 적용하고, 움직임 벡터가 존재할 확률이 낮은 영역은 한 픽셀 건너 뛰어서 블록 정합하여 계산 비용을 효율적으로 감소시켯다. 제안한 알고리즘은 극히 낮은 화질 저하를 가지며, 기존의 H.264에서 사용되고 있는 전역 탐색 알고리즘에 비해 P프레임의 경우 85% 이상의 계산 비용 감소가 있어 H.264를 이용하는 비디오 압축 응용 분야에 유용하게 사용될 수 있을 것이다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.4
• /
• pp.242-253
• /
• 2020

Purpose: The aim of this study was to compare the accuracy of dies fabricated using 3D printing system to conventional method and to evaluate overall volumetric changes by arranging the superimposed surfaces. Materials and Methods: A mandibular right first molar from a dental model was prepared, scanned and fabricated with composites of polyetherketoneketone (PEKK). Master dies were classified into 4 groups. For the conventional method, the impression was taken with polyvinylsiloxane and the impression was poured with Type IV dental stone. For the 3D printing, the standard die was scanned and converted into models using three different 3D printers. Each of four methods was used to make 10 specimens. Scanned files were superimposed with the standard die by using 3D surface matching software. For statistical analysis, Kruskal-Wallis test and Mann-Whitney U test were done (P < 0.05). Results: Compared to the standard model, the volumetric changes of dies fabricated by each method were significantly different except the models fabricated by conventional method and 3D printer of Stereolithography (P < 0.05). The conventional dies showed the lowest volumetric change than 3D printed dies (P < 0.05). 3D printed dies fabricated by Stereolithography showed the lowest volumetric change among the different 3D printers (P < 0.05). Conclusion: The conventional dies were more accurate than 3D printed dies, though 3D printed dies were within clinically acceptable range. Thus, 3D printed dies can be used for fabricating restorations.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.212-227
• /
• 2008

Since 3D face can be rotated freely in 3D space and illumination effects can be modeled properly, 3D face modeling Is more precise and realistic in face pose, illumination, and expression than 2D face modeling. Thus, 3D modeling is necessitated much in face recognition, game, avatar, and etc. In this paper, we propose a 3D face modeling method based on 3D morphable shape modeling. The proposed 3D modeling method first constructs a 3D morphable shape model out of 3D face scan data obtained using a 3D scanner Next, the proposed method extracts and matches feature points of the face from 2D image sequence containing a face to be modeled, and then estimates 3D vertex coordinates of the feature points using a factorization based SfM technique. Then, the proposed method obtains a 3D shape model of the face to be modeled by fitting the 3D vertices to the constructed 3D morphable shape model. Also, the proposed method makes a cylindrical texture map using 2D face image sequence. Finally, the proposed method builds a 3D face model by rendering the 3D face shape model with the cylindrical texture map. Through building processes of 3D face model by the proposed method, it is shown that the proposed method is relatively easy, fast and precise than the previous 3D face model methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3422-3427
• /
• 2010

In this paper, we presents a sensor calibration technique using stereo X-ray images to provide efficient inspection of fast moving cargo objects. Stereo X-ray scanned images are acquired from a specially designed equipment which consists of a X-ray source, dual-linear array detector, and a conveyor system. Dual detector is installed so that rectified stereo X-ray images of objects are acquired. Using the stereo X-ray images, we carry out a sensor calibration to find the correspondences between the images and reconstruct 3-D shapes of real objects. Using the Image acquired from the stereo detectors with varying distances, we calculated the GCP(ground control point)of the image. And we figure out the error by comparing calculated GCP and GCP of the real object. The experimental results show the proposed technique can enhance the accuracy of stereo matching and give more efficient visualization for cargo inspection image.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.2083-2090
• /
• 2010

This paper presents a 3-D visualization technique using stereo radioactive images to provide efficient inspection of fast moving cargo objects. The proposed technique can be used for such objects which CT or MRI cannot inspect due to restricted scan environment. Stereo radioactive images are acquired from a specially designed equipment which consists of a X-ray source, linear radioactive sensors, and a moving stage. Two radioactive sensors are installed so that rectified stereo X-ray images of objects are acquired. Using the stereo X-ray images, we run a matching algorithm to find the correspondences between the images and reconstruct 3-D shapes of real objects. The objects are put in a parallelepiped box to simulate cargo inspection. Three real objects are tested and reconstructed. Due to the inherent ambiguity in the stereo X-ray images, we reconstruct 3-D shapes of the edges of the objects. The experimental results show the proposed technique can provide efficient visualization for cargo inspection.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.102-107
• /
• 2011

The current blood control system is using barcode and scanning one by one to manage blood bags. To have better management and accuracy, an RFID BIS (blood information system) is implemented with an UHF RFID tag antenna using a reflecter for a blood bag has been used.. The UHF RFID tag for blood bag, attached on the high permittivity blood, is designed and fabricated. The tag antenna is optimized and fabricated with the simulation tests such as the existence and nonexistence of the reflector, various distance between the reflector and the dipole tag, the different widths of the reflector and the existence and nonexistence of the T-matching structure. The characteristics and the reading range patterns of the tag antennas are measured. The BIS is implemented with the new tag design.