• 대한기계학회논문집
• /
• 제19권2호
• /
• pp.568-579
• /
• 1995

An off-line programming (OLP) system was proposed and developed in order to save cost and time in adjusting a robot to new workcells or applying new algorithms to actual trajectory planning. The developed OLP system was especially designed to be operated in a PC level host computer. A SCARA robot with four axes was selected as an objective robot. The OLP system developed in this study consisted of such modules as data base, three-dimensional graphics, kinematics, trajectory planning, dynamics, control, and commands. Each module was constructed to form an independent unit so that it can be easily modified or improved. The OLP system was programmed for a graphic user interface in Borland $C^{++}$ language. Some of system operating commands and an interpreter were devised and used for more convenient programming of robot simulations.s.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.173-179
• /
• 2002

This paper presents a new approach to the design of adaptive control system using DSPs(TMS320C50) fur robotic manipulators to achieve trajectory tracking angles. Digital signal processors are used in implementing real time adaptive control algorithms to provide motion for robotic manipulators. In the proposed scheme, adaptation laws are derived from the improved second stability analysis based on the indirect adaptive control theory. The proposed control scheme is simple in structure, fast in computation, an suitable fur implementation of real-time control. Moreover, this scheme does not require an accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the adaptive controller is illustrated by experimental results for a SCARA robot.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.128-133
• /
• 2001

This paper presents a new approach to the design of adaptive control system using DSPs(TMS320C50) for robotic manipulators to achieve trajectory tracking angles. Digital signal processors are used in implementing real time adaptive control algorithms to provide motion for robotic manipulators. In the proposed scheme, adaptation laws are derived from the improved second stability analysis based on the indirect adaptive control theory. The proposed control scheme is simple in structure, fast in computation, an suitable for implementation of real-time control. Moreover, this scheme does not require an accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the adaptive controller is illustrated by experimental results for a SCARA robot.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.99-110
• /
• 1995

An industrial robot needs a simple and robust control algorithm obtaining high precision control performance in spite of disturbance and parameter's change. In this paper, for solving this problem, a new sliding mode control algorithm is proposed and applied to the trajectory control of a SCARA type robot. The proposed algorithm has diminished the chattering occurring in sliding mode by setting a dead band along the switching line on the phase plane. It shows that we can easily obtain a simple switching control input satisfying sliding mode in spite of regarding nonlinear terms of a manipulator and servo system as disturbance. A guideline for selection of dead-band width is determined by optimal value of cost function presenting magnitudes of chattering and error. By this algorithm, we can expect the high performance of the trajectory tracking of an industrial robot which needs a robust and simple algorithm.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.478-482
• /
• 1996

This paper presents a new approach to the design of adaptive control system using DSPs(TMS320C50) for robotic manipulators to achieve trajectorytracking angles. Digital signal processors are used in implementing real time adaptive control algorithms to provide motion for robotic manipulators. In the proposed scheme, adapation laws are derived from the improved second stability analysis based on the indirect adaptive control theory.l The proposed control scheme is simple in structure, fast in computation, an suitable for implementation of real-time control. Moreover, this scheme does not requre an accurate dynamic modeling, nor values of manipulator paramenters and payload Performance of the adaptive controller is illustrated by exeperimental results for a SCARA robot.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.401-404
• /
• 1991

In this paper, the controllers for the motion of the 2-joint manipulator design two stages: (1) a primary controller that under ideal conditions makes the end-effector track the desired trajectory: (2) a secondary controller that compensates for undesirable deviations of the motion from the disired trajectory caused by external and/or internal disturbances. The secondary contoller is applied to PID control algorithm. and the controllers is actually designed using IBM-PC/AT and 8096 single chip microprocessor.

• 대한전자공학회논문지
• /
• 제25권8호
• /
• pp.916-926
• /
• 1988

In this paper, we explore real-time implementation of various dynamic control algorithms, which use the different levels of the information of the dynamics, using a SCARA type robot to show the feasibility and effectiveness of such algorithms. For these purposes, the kinematics of the SCARA type robot is anayzed and the manipulator-actuator dynamic equations based on Lagrange mechanisms are derived. Experimental results indicate that computed torque technique and iterative learning control methods perform better than classical PID control and that these algorithms can be effectively applied to controlling industrial manipulators.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.472-477
• /
• 1996

This paper presents a new approachtothe design of adaptive control system using DSPs(TMS320C30) for robotic manipulators to achieve trajectory tracking by the joint angles. Digital signal processors are used in implementing real time adaptive control algorithms to provide an enhanced motion control for robotic manipulators. In the proposed control scheme, adaptation laws are derived from the improved Lyapunov second stability analysis method based on the adaptive model reference control theory. The adaptive controller consists of an adaaptive feedforward controller, feedback controller, and PID type time-varying auxillary control elements. The prpposed adaptive control scheme is simple in structure, fast in computation, and suitable for implementation of real-time control. Moreover, this scheme does not require an accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the adaptive controller is illustrated by simulation and experimental results for a SCARA robot.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.307-309
• /
• 1993

Robot's kinematic equation is not perfect. In this paper, a method for reducing the positioning error which comes from the imperfect robot kinematics is introduced. This method compensates the parameter of the kinematic equation using real positioning error. And the trajectories using these compensated parameterare compared with uncompensated ones.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.241-245
• /
• 1995

This paper shows that the proposed fuzzy-sliding mode for SCARA robot control could reduce chattering problemed in sliding mode control and is robust against parameter uncertainties. It was very small quantities of chattering in the fuzzy-sliding mode control conpared with that in sliding mode control with two dead-band. In here, the sliding mode control with two dead-band is the method to reduce some chattering by changing into a continuous variable lower control input gain when a state value in pahase palne converged sithin two dead-band. But, the fuzzy-sliding mode control for more reducing chattering is the method to change control input by slicing mode into that by fuzzy rule within two dead-band. Simulations show that the effect of reducing chattering by the fuzzy-sliding mode is superior to sliding mode control with two dead-band.