• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.293-296
• /
• 2005

This paper is concerned with the sweeping damping controller for beam. The active damping characteristics can be enhanced by moving the damper along the longitudinal axis. In this paper, the equation of motion for a beam including a sweeping damping controller is derived and its stability is proved by using Lyapunov stability theorem. It is found from the theoretical study that the sweeping damping controller can enhance the active damping characteristics, so that a single damper can suppress all the vibration modes of the beam. To demonstrate the concept of the sweeping damping control, the eddy current damper was applied to a cantilever, where the eddy current damping can move along the axis. The experimental result shows that the sweeping eddy current damper Is an effective device for vibration suppression.

• 한국융합학회논문지
• /
• 제8권11호
• /
• pp.49-56
• /
• 2017

컬링 스위핑 동작은 컬링 스톤의 위치를 조절하는 중요한 동작 중 하나이며, 스위핑 속도와 브룸 패드에 가해지는 힘이 중요한 연구 대상이다. 본 연구에서는 컬링 스위핑 동작에서 컬링 브룸 패드에 가해지는 힘을 측정할 수 있는 장비를 개발하였으며, 두 개의 로드셀을 브룸 패드와 패드 홀더 사이에 장착하는 구조를 이용하였다. 로드셀에서 발생되는 아날로그 신호는 마이크로 제어기를 이용하여 초당 약 300회의 속도로 샘플링을 수행한 후 10 bit 디지털 신호로 변환하였다. 3개의 M1 급 분동을 이용하여 로드셀의 교정과 측정된 전기 신호를 질량(힘)으로 환산하는 회귀 방정식을 추출하였으며, 브룸의 무게 증가를 최소화하기 위해서 웨어러블 장비로 구성하였다. 스포츠 분야에서 힘 측정 시 기준 장비로 사용하는 지면 반력기와 개발된 장비에 동일한 힘을 가하면서 측정된 측정값 차이는 약 $0.909{\pm}1.375N$ (평균과 표준 편차)로 측정되었다. 개발된 장비는 스위핑 동작과 유사한 힘 측정을 필요로 하는 다른 종류의 연구에도 적용이 가능할 것으로 판단된다.

• 센서학회지
• /
• 제29권6호
• /
• pp.412-419
• /
• 2020

In this study, a PID control method for sweeping automatic linearization of a wavelength swept laser is proposed. First, the closedloop transfer function embodying the PID control is derived. Through the simulation of the function, K_p = 0.022, K_i = 0.008, K_d = 0.002 were obtained as the best PID coefficients for fast linear sweeping. The performance test using the PID coefficients showed that linear sweeping was held up well with a 98.7% decrement in nonlinearity after the 10th feedback, and 45 nm sweeping range, 1 kHz sweeping frequency, and 8.8 mW average optical power were obtained. The equipment consists of a fiber Bragg grating array, an optical-electronic conversion circuit, and a LabVIEW FPGA program. Every 5s, automatic feedback and PID control generate a new compensated waveform and produce a better linear sweeping than before. Compared with nonlinear sweeping, linear sweeping can reduce the cumbersome and time-consuming recalibration processes and produce more accurate measurement results.

• 제어로봇시스템학회논문지
• /
• 제7권1호
• /
• pp.1187-1195
• /
• 2001

This paper presents a sweeping path planning algorithm for an autonomous smearing robot. An automatic planner generates a sweeping path pattern by proposed five basic procedures. This algorithm rocog-nizes obstacle on the architectural CAD draft and generates subgoals as tracking points which executes the area filling task based on heuristic approach. A sweeping path is planned by sequentially connecting the track-ing points in such a way that(1) the connected line segments should not be crossed, (2) the total tracking points should be as short as possible, and (3) the tracking line should not pass through the obstacle, Feasibility of the developed techniques has been demonstrated on a real architectural CAD draft.