• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1806-1813
• /
• 2003

The stirred tank reactor is one of the most commonly used devices in industry for achieving mixing and reaction. Here we report on results obtained from the large eddy simulations of flow inside the tank performed using a spectral multi-domain technique. The computations were driven by specifying the impeller-induced flow at the blade tip radius. Stereoscopic PIV measurements (Hill et $al.^{(1)}$) along with the theoretical model of the impeller-induced flow (Yoon et $al.^{(2)}$) were used in defining the impeller-induced flow as superposition of circumferential, jet and tip vortex pair components. Large eddy simulation of flow in a stirred tank was carried out for the three different Reynolds numbers of 4000, 16000 and 64000. The effect of different Reynolds numbers is well observed in both instantaneous and time averaged flow fields. The instantaneous and mean vortex structures are identified by plotting an isosurfaces of swirling strength for all Reynolds numbers. The Reynolds number dependency of the nondimeansional eddy viscosity, resolve scale and subgrid scale dissipations is clearly shown in this study.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.117-120
• /
• 2008

Numerical simulations and experiment of a hydrodynamic and thermally developed turbulent flow through square ducts (3.0 ${\times}$ 3.0 cm) with twisted tape inserts and with twisted tape inserts plus interrupted ribs are conducted to investigate regionally averaged heat transfer and friction factors. Turbulent swirl flows having Reynolds numbers ranging from 8,900 to 29,000, a rib height-to-channel hydraulic diameter(e/D$_h$) of 0.067, and a length-to-hydraulic diameter(L/D$_h$) of 30, are considered. The square ribs are arranged to follow the trace of the twisted tape and along the flow direction defined as axial interrupted ribs. The twisted tape has 0.1 mm thick carbon steel sheet with diameter of 2.8 cm, length of 90 cm, and 2.5 turns. Each wall is composed of isolated aluminum sections, and two cases of surface heating are set. The results show that uneven surface heating enhances the heat transfer coefficient over uniform heating conditions, and square ducts with twisted tape inserts plus interrupted ribs produces the best overall transfer performance.

• 동력기계공학회지
• /
• 제5권1호
• /
• pp.21-26
• /
• 2001

This paper represents the turbulent intensity, the turbulent kinetic energy and Reynolds shear stress in the X-Y plane of cone type swirl gas burner measured by using X-probe from the hot-wire anemometer system. The experiment is carried out at flowrate 350 and $450{\ell}/min$ respectively in the test section of subsonic wind tunnel. The turbulent intensity and the turbulent kinetic energy show that the maximum value is formed in the narrow slits distributed radially on the edge of a cone type swirl burner, hence, the combustion reaction is anticipated to occur actively near this region. And the turbulent intensities ${\upsilon}\;and\;{\omega}$ are disappeared faster than the turbulent intensity u due to the inclined flow velocity ejecting from the swirl vanes of a cone type baffle plate of burner. Moreover, the Reynolds shear stress $u{\upsilon}$ is distributed about three times as large as the Reynolds shear stress $u{\omega}$ in the outer region of the cone type gas burner.

• 동력기계공학회지
• /
• 제4권4호
• /
• pp.25-31
• /
• 2000

This paper represents the vector fields and three dimensional mean velocities in the X-Y plane of cone type swirl gas burner measured by using X-probe from the hot-wire anemometer system. This experiment is carried out at flowrate 350 and $450{\ell}/min$ respectively in the test section of subsonic wind tunnel. The vector plot shows that the maximum axial mean velocity component is focused in the narrow slits distributed radially on the edge of a cone type swirl burner, for that reason, there is some entrainment of ambient air in the outer region of the burner and the rotational flow can be shown in the inner region of the burner because mean velocity W is distributed about twice as large as mean velocity V due to inclined flow velocity ejecting from the swirl vanes of a cone type baffle plate of burner. Moreover, the mean velocities are largely distributed near the outer region of burner within $X/R{\fallingdotseq}1.5$, hence, the turbulent characteristics are anticipated to be distributed largely in the center of this region due to the large inclination of mean velocity and swirl effect.

• 한국유체기계학회 논문집
• /
• 제20권1호
• /
• pp.21-28
• /
• 2017

Optimization process of pre-swirl nozzle geometry was conducted to improve the discharge coefficient of pre-swirl system by using CFD. The optimization of pre-swirl nozzle shape covered the converging angle and the location of the converging nozzle. Optimization process included Optimal Latin Hyper-cube Design method to get the experimental points and the Kriging method to create the response surface which gives candidate points. The process was finished when the difference between the predicted value and CFD value of candidate point was less than 0.1 %. This paper compared the Reference model, Initial model which is the first model of optimization and Optimized model to study flow characteristics. Finally, the discharge coefficient of Optimized model is improved about 17 % to the Reference model.

• 한국분무공학회지
• /
• 제23권2호
• /
• pp.58-65
• /
• 2018

An analytic strategy to control the variable valve actuation applied to two intake valves (flow port intake valve and swirl port intake valve) was performed in this study. we considered the variation in phasing of intake valve profiles by using the Cam-in-Cam technology. The analytic model was implemented in the GT-Power simulation program and analyzed the result of regulated emissions such as, NOx and Soot, especially with IMEP characteristics. Namely, we meticulously investigated the sources of having effect on the amount of NOx and soot formation under the test conditions with retard timing of both flow port and swirl port intake valves for decreasing the opening duration by 35CAD. Also, we analyzed the effect of incylinder pressure and temperature with NOx variations and in-cylinder pressure and temperature on NOx variations and normalized turbulent intensity. Through this analysis, some useful results on the combustion and flow characteristics of the swirl port and flow port control of the intake valve were obtained by this study.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.61-65
• /
• 2010

초저온 추진제를 사용하는 액체로켓용 인젝터의 개발을 위해서는 단일 인젝터의 수류/연소시험을 통해 인젝터의 수력학적 특성 및 혼합, 미립화 등의 분무특성에 대한 연구가 필수적이다. 본 연구에서는 대학실험실 급에서 운용할 수 있는 범위의 가압식 초저온 추진제 공급장치 및 LabVIEW를 이용한 Cyclogram 제어 및 데이터 수집장치 등을 구축하였다. 제작된 시험장치를 이용하여 스월-동축인젝터의 $LN_2-GN_2$ 초저온 수류시험 및 분무 가시화를 수행하였다. 또한 LOX-$GCH_4$ 추진제 조합의 연소시험을 위한 연소기와 추력대를 설계 및 제작하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제23회 추계학술대회 논문집
• /
• pp.205-209
• /
• 2004

인젝터의 배열과 형상 변화는 연소실내에서의 미립화, 증발, 혼합, 화학반응 등을 변화시킴으로써 액체로켓엔진의 연소 조건과 열 교환에 영향을 준다. 본 논문에서는 연소실내의 다양한 현상 중 인젝터 배열이 혼합비 분포에 미치는 영향을 물리적 접근방법을 통하여 살펴보고 프로그램을 작성하여 혼합비 분포를 계산 하고자 하였다. 단, 예측 방법의 유도 과정에서 도입된 물리 현상의 단순화와 여러 가정으로 인해 본 방법의 적용성과 정확성에는 한계가 있으나 mechanical patternator 사용이 어려운 full scale 가스발생기나 연소기의 국부적인 혼합비 예측에 효과적인 활용이 될 수 있으리라 판단된다.

• 항공우주기술
• /
• 제6권1호
• /
• pp.128-135
• /
• 2007

분사기 헤드에 설치된 분사기 수를 바꾸어가며 실물형 가스발생기의 연소 특성에 대한 실험적 연구를 수행하였다. 가스발생기에 공급되는 총 추진제의 유량은 같으면서 분사기당 유량이 달라지는 실물형 가스발생기 3대가 사용되었다. 각 가스발생기에는 13개, 19개, 37개의 내부 혼합형 이중 스월 분사기가 배치되었다. 연소시험 결과, 13개, 19개 분사기를 장착한 가스발생기는 축방향 공진주파수에 해당하는 섭동이 발생하지 않았지만, 37개 분사기가 장착된 가스발생기의 경우 강도가 작긴 하지만 축방향 공진주파수에 해당하는 압력 섭동 현상이 나타나고 있다. 분사기 수가 증가할수록 연소실내의 온도 분포 편차는 점차 작아지지만, 분사기 LOx post의 손상은 증가하는 결과를 나타내었다.

• 청정기술
• /
• 제19권1호
• /
• pp.1-7
• /
• 2013

본 연구에서는 역전기투석 장치 내 스페이서(spacer)에 의한 유동변화와 스페이서의 높이변화에 따른 해수의 유동 및 이온전달 영향에 관한 연구를 수행하였다. 육각형 모양의 스페이서에 대해 3차원 전산유체해석을 진행하였다. 모델링을 수행한 결과, 레이놀즈수(Reynolds number)가 커짐에 따라 스월량(swirl)이 커지며 단위시간당 해수의 이온이 멤브레인(membrane)으로 전달되는 양이 늘어나지만, 반면에 입출구의 압력차도 증가하였다. 또한 스페이서가 두꺼울수록 파워수(Power number)와 셔우드수(Sherwood number)가 증가하였다.