• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.4
• /
• pp.5-13
• /
• 2020

This study was conducted to evaluate effects of compressed expansion rice hull (CERH) as bulking agent on physicochemical properties of composting poultry manure (PM) and of its fertilization on lettuce and pak choi growth. Treatments were designed as follows; sawdust treatment (90% PM + 10% sawdust; SP), peatmoss treatment (90% PM + 10% peatmoss; PP), and CERH treatments [PCR1 (90% PM + 10% CERH 1.3 mm) and PCR2 (90% PM + 10% CERH 3.0 mm)]. Physicochemical properties such as temperature, water content, pH, and total carbon of composted poultry piles for 31 days were unaffected by various bulking agents. However, total nitrogen content in compost pile was higher in PP and PCR1 than that of SP or PCR2. After composting for 31 days, content ranges of N, P2O5, and K2O in the composting PM piles were 19.1~19.7%, 47.6~51.6%, 2.76~3.65%, and 2.53~2.90%, respectively. As compared to SP treatment, dry weight of lettuce treated with PP and PCR1 increased by more than 10%, but only in PP for pak choi. These results indicated that CERH 1.3 could be used as bulking agents for composting PM on behalf of peatmoss or sawdust.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.4
• /
• pp.63-70
• /
• 2003

In the modern electronic world, the authentication of a person is an important task in many areas of online-transactions. Using biometrics to authenticate a person's identity has several advantages over the present practices of Personal Identification Numbers(PINs) and passwords. To gain maximum security in the verification system using biometrics, the computation of the verification as well as the store of the biometric pattern has to be taken place in the security token(smart card, USB token). However, there is an open issue of integrating biometrics into the security token because of its limited resources(memory space, processing power). In this paper, we describe our implementation of the USB security token system having 206MHz StrongARM CPU, 16MBytes flash memory, and 1MBytes RAM. Also, we evaluate the performance of a light-weighted In-gerprint verification algorithm that can be executed in the restricted environments. Based on experimental results, we confirmed that the RAM requirement of the proposed algorithm was about 6.8 KBytes and the Equal Error Rate(EER) was 1.7%.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.3
• /
• pp.870-882
• /
• 2021

Coptis chinensis has been used in the treatment of various diseases such as soothing, anti-inflammation, antimicrobial and antipyretic in oriental traditional medicine. In this study, we investigated the effect of hot water extract of Coptis chinensis(CCW) on skin barrier and inflammation-related factors in UVB and TNF-α/IFN-γ-induced HaCaT cells and evaluated its potential as a moisturizing and anti-inflammatory material. Based on result, the amount of HA (Hyaluronic acid) production and protein and mRNA expression of filaggrin were measured. In TNF-α/IFN-γ-induced HaCaT cells, CCW increased the amount of HA production in a concentration-dependent manner. In the measurement of protein and mRNA expression of filaggrin, the expression rate increased as the concentration of CCW increased. In UVB-induced HaCaT cells, CCW decreased the production of ROS and showed significant results with EGCG ((-)-epigallocatechin-3-gallate), a positive control. In addition, CCW inhibited the expression of inflammatory cytokines TNF-α, IL-1β, IL-6, and IL-8 in TNF-α/IFN-γ-induced HaCaT cells. It was confirmed that the protein and mRNA expression of COX-2, a major factor in skin inflammation, was decreased in a concentration-dependent manner. These results suggest that hot water extract from Coptis chinensis can be used as a cosmetic material having a moisturizing and anti-inflammatory effect.

• Korean Journal of Environment and Ecology
• /
• v.35 no.4
• /
• pp.387-397
• /
• 2021

This study aims to present reference data necessary for developing evaluation indicators to analyze the actual resilience of purchased land by investigating the factors that affect the restoration of the purchased land in the riparian zone and quantitatively calculating its importance. The main results are as follows. Firstly, this study identified 34 potential resilience factors through a literature review encompassing domestic and overseas studies and derived seven ecological responsiveness factors, six physical responsiveness factors, and four managerial responsiveness factors through the Delphi survey. Secondly, reliability analysis and Analytic Hierarchy Process (AHP) analysis derived the following important factors: structural stability of the vegetation restored in the purchased land, species diversity of wildlife, structural stability of wildlife, the size of restored wetland after purchase, number of plant species, and the land cover status adjacent to the purchased land. The study results are expected to be helpful information for ecological restoration and management plans reflecting reinforcing factors for resilience at each stage of land purchase, restoration, and management.

• Korean Journal of Food Science and Technology
• /
• v.54 no.3
• /
• pp.264-271
• /
• 2022

In this study, the nutritional properties of sterilized and non-heat-pressed raw perilla oil (SRPO) were studied and its potential as a functional food was evaluated. The copper, cobalt, and calcium levels were high in sterilized and SRPO. The total polyphenol content and ABTS radical scavenging activity were the highest in SRPO, whereas nitrite scavenging activity was the highest in 45℃ cold pressed perilla oil (CPPO). The above results confirmed that sterilized and non-heat-pressed perilla oil had high mineral and total polyphenol contents, as well as ABTS radical scavenging activity and nitrite scavenging ability. The peroxide value of SRPO decreased as the storage period increased, and the acid value of low-temperature pressed perilla oil over 65℃ (LPPO) significantly increased. This work also provided an opportunity to develop a new method for manufacturing perilla oil, and it is hoped that these experiments will form a basis for the commercialization of perilla oil.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.4
• /
• pp.21-32
• /
• 2022

Steel pile foundations are widely used for offshore constructions due to their high bearing capacity and efficiency. Typically, offshore structures that have reached the end of their design life are required to be demolished. However, pile foundations are often left on site due to technical and economic limitations. The pile left on the site not only pollutes the environment, but can also cause obstacles for the construction of new structures. Therefore, research is required to completely eliminate these foundations at the site. In this study, a new type of double-wall pile foundation that can drastically reduce the pull-out load was conceptually proposed, and a series of model tests were performed to validate the performance of the double-wall pile foundation. The installation and extraction of the double-wall pile were simulated in dry sand in the model test, and the measured up-lift load was compared to that of the conventional pile. According to the result, the maximum up-lift load induced by the decommissioning of the double-wall pile was reduced by 45% when compared to the traditional pile in dense sand. This study verified the mechanism for reducing the up-lift load of the double-wall foundation and confirmed the possibility of completely decommissioning a pile that has reached the end of its nominal service life.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.2
• /
• pp.85-94
• /
• 2022

Construction industry is facing difficult challenges in terms of productivity, manpower, and industrial accidents. Currently, along with the 4th Industrial Revolution, various high-tech technologies are emerging, and efforts are being made to solve the problem by applying the technologies related to the 4th Industrial Revolution to the construction industry. As part of these efforts, research is being conducted to develop a construction equipment control system to increase productivity and safety at earthworks sites where many and various types of construction equipment are involved, and the system needs a function to increase productivity by optimizing the moving path of construction equipment. In the case of trucks, the location of the temporary road must be optimized in order to optimize the path of movement in the construction site. However, only matters related to the quality standard of temporary roads have been suggested so far, and there is no standardized process for efficiently determining the location of temporary roads. In this paper, the factors and its importance related to the location of the temporary road were identified through field surveys and interviews with experts, and a method for determining the location of the temporary road was presented. It was confirmed that the suggested method through a case study could improve the productivity of earthwork.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.5
• /
• pp.29-35
• /
• 2022

This paper proposes a fuel cell education framework installed on a Metaverse environment, which is to reduce the burden of education costs and improve the effect of education or learning. This Meta-Fuel cell platform utilizes the Unity 3D Web and enables not only theoretical education but also hands-on training. The platform was designed and developed to accommodate a variety of unit education contents, such as ppt documents, videos, etc. The platform, therdore, integrates ppt and video demonstrations for theoretical education, as well as software content "STACK-Up" for hands-on training. Theoretical education section provides specialized liberal arts knowledge on hydrogen, including renewable energy, hydrogen economy, and fuel cells. The software "STACK-Up" provides a hands-on practice on assembling the stack parts. Stack is the very core component of fuel cells. The Meta-Fuelcell platform improves the limitations of face-to-face education. It provides educators with the opportunities of non-face-to-face education without restrictions such as educational place, time, and occupancy. On the other hand, learners can choose educational themes, order, etc. It provides educators and learners with interesting experiences to be active in the metaverse space. This platform is being applied experimentally to a education project which is to develop advanced manpower in the fuel cell industry. Its improvement is in progress.

• Journal of Korea Port Economic Association
• /
• v.37 no.4
• /
• pp.41-50
• /
• 2021

This study investigated what the general public thinks about the shipping industry and how important it is. As a result of the study, more than half of the respondents answered that they knew a little about the shipping industry or that they were normally knew about the shipping industry. Regarding the necessity of budget input to prevent bankruptcy of national shipping companies, it was found that more than half of the respondents answered that it was necessary or moderate. Regarding the necessity of maintaining a national shipping companies, 53% of respondents said it was necessary, and 23% of respondetns said it was normal. However, when asked if they thought that maintaining a national shipping companies would benefit me and my family, 39% of respondetns answered "normal" and 28% of respondetns answered "mostly". As for the cause of Hanjin Shipping's bankruptcy, 49% of respondents said that the owners' family members were immoral and incompetent, and 17.4% of respondetns said that the shipping market conditions deteriorated. Regarding the necessity of fostering the shipping industry, foreign currency acquisition and service balance improvement through export of shipping services accounted for 43.5%, and smooth transportation of import and export cargo accounted for 36.5%. When asked what kind of damage I suffered from Hajin Shipping's bankruptcy, 54.6% answered other (not much), and 14.5% said inflation. Abouve these results, this study gave implication in terms of public promotion and transparent business management.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.10
• /
• pp.345-352
• /
• 2022

Recent LiDAR(Light Detection And Ranging) sensor is used for scanning object around in real-time. This sensor can detect movement of the object and how it has changed. As the production cost of the sensors has been decreased, LiDAR begins to be used for various industries such as facility guard, smart city and self-driving car. However, LiDAR has a large input data size due to its real-time scanning process. So another way for processing a large amount of data are needed in LiDAR system because it can cause a bottleneck. This paper proposes edge computing to compress massive point cloud for processing quickly. Since laser's reflection range of LiDAR sensor is limited, multiple LiDAR should be used to scan a large area. In this reason multiple LiDAR sensor's data should be processed at once to detect or recognize object in real-time. Edge computer compress point cloud efficiently to accelerate data processing and decompress every data in the main cloud in real-time. In this way user can control LiDAR sensor in the main system without any bottleneck. The system we suggest solves the bottleneck which was problem on the cloud based method by applying edge computing service.