• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.563-568
• /
• 2015

풍력터변의 성능을 높이기 위한 방법으로 최근 해외에서는 쉬라우드를 장착하여 유입 유량을 증진시키는 형상에 대한 새로운 아이디어가 제안되고 시범적으로 적용되고 있다. 본 연구에서는 쉬라우드가 장착된 수평축 풍력터빈에 대해서 EDISON CFD를 이용하여 쉬라우드 내부로 유입되는 질량 유량의 변동을 몇 가지 형상에 대해 수치적으로 비교 분석하였다. 유동장은 비압축성 난류유동으로 가정하였으며, 수치 해석 결과로부터 쉬라우드 주변의 순환의 세기를 형상 변동에 따라 도출하였다. 쉬라우드 형상으로는 캠버를 갖는 goe 417 에어포일을 두 개의 받음각(5도, 10도)에 대해서 수치해석을 수행하였으며, 브림을 갖는 디퓨저 형상(Wind-lens)에 대해서도 유입 유량 변동과 순환 세기에 대해 수치해석을 수행하고 결과를 상호 비교하였다. 본 연구를 통해 쉬라우드가 발생시키는 순환에 의한 유입 유량 증가 현상을 파악할 수 있었으며, 이로써 풍력터빈의 출력을 증대시킬 수 있음을 확인하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.2
• /
• pp.77-83
• /
• 2012

Numerical analyses through Computational Fluid Dynamics have been performed to investigate the seawater flow field characteristics for various shrouds used in horizontal axis tidal current turbine systems. Seawater flow characteristics are largely influenced under constant tidal current velocity by the shroud geometry and there is considerable difference in fluid velocity distributions around the shrouds. Especially the location and magnitude of maximum seawater flow velocity directly affect turbine performance for power generation. For the cylinder-diffuser type shroud system whose cylinder and diffuser parts have the same length accelerated flow region is formed in the overall cylinder part while maximum velocity in the nozzle-diffuser type whose nozzle and diffuser parts have the same length with symmetry, locally appears near the minimum sectional area. In case of cylinder-diffuser type shroud fluid velocity increases rather high compared with current velocity. And fluid velocity at the centerline gradually increases from the entrance, and then decreases rapidly after reaching a peak close to the middle of the cylinder part unlike the nozzle-diffuser while there is not much variation near the rear of the shroud. These results of the seawater flow characteristics with various shroud geometries can be applied to optimal design for the development of efficient tidal current power generation systems.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.1
• /
• pp.48-54
• /
• 2020

Numerical analysis was carried out to analyze the flow fields and mechanical output of a rotor for various positions and inlet flow rates in a shroud, and it was compared with experimental data. Rotor and seawater current largely affects the flow field characteristics in the shroud system. Especially the mechanical output of the rotor increased with axial position near the center of the cylinder, and it gradually decreased close to the entrance and exit. Also, the rotor output increased with the inlet velocity. Axial and angular momentum of flow along the cylinder region rapidly increased and reached a peak, and then decreased as it passed through the rotor, while there was no significant change in the cylinder region. It is expected that these results can be used as applicable design data for the development of the tidal power generation system.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.3
• /
• pp.134-141
• /
• 2018

Numerical simulations were carried out to investigate the flow velocity changes in the flow field due to the variation in the thickness of the upper part of the shroud tidal power generation system. In this study, it was performed under constant flow velocity condition. In addition, performance analysis of shroud was performed under the same conditions. As the height of the upper part increases, the flow velocity rate gradually increases, and it tends to decrease at a certain height. As a result of analyzing the shape of the blade and the shape of the blade combined with the shroud, the torque of the blade increased due to the increase of the flow rate by the shroud system. It is expected that the shape of the structure obtained by this study and the analysis of the flow velocity distribution in the flow field can provide the data necessary for the development of an efficient shroud tidal power generation system.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.1
• /
• pp.9-16
• /
• 2019

Flow velocity changes in the shroud system for tidal current power generation due to experimental flow velocities and blade geometry changes were analyzed by hydraulic experiment and numerical simulation. Through the hydraulic experiment, flow velocities at inlet of shroud system and RPM according to blade geometry were measured, and numerical simulation was used to analyze flow velocity changes in shroud. When the experimental flow velocity was increased by about 28% and the shape of the airfoil was applied, the measured flow velocity at the shroud inlet tended to increase by up to about 56%. On the other hand, when airfoil-shaped blades were installed, the flow velocity at the inlet tended to increase by up to 14% compared to conventional blades, and RPM was also the highest at the same conditions. The hydraulic experiment and numerical simulation results showed an error of about 13%, and the trends of the flow velocity changes in each result are similar. Numerical simulation of the flow velocity changes in the shroud showed that the flow velocity tended to increase 1.7 times at the front of the blade compared to the inlet. The results of the flow velocity change analysis in the shroud system obtained from this study will provide the basic data necessary for the development of efficient shroud system for tidal current power generation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.213-213
• /
• 2011

본 논문에서 연구하고자 하는 팬은 대형 차량용 라디에이터 냉각팬으로써 수치해석을 통한 일반적인 팬의 성능 평가시 팬과 쉬라우드의 형상만을 이용하여 시뮬레이션 하지만 라디에이터를 거쳐 공기가 유입되는 실제 현상에 좀 더 가깝게 모사하고자 라디에이터의 압력 부하를 고려한 시뮬레이션을 수행하였고 기존 해석 결과와 비교하였다. 연구된 냉각팬은 쉬라우드의 전방에 라디에이터가 설치되며 라디에이터를 통하여 공기가 유입되기 때문에 라디에이터의 압력 부하에 따라 팬 성능에 영향을 준다. 라디에이터의 압력 부하 성능을 모사하기 위하여 쉬라우드 입구에 박스 형태로 라디에이터의 외부 크기를 모델링 한 후 수치해석 시 porous media model을 사용하여 풍속에 따른 압력 강하 곡선을 적용하였다. 수치해석에서 porous media model을 적용할 경우 실제적인 형상 모델링 없이도 실험으로부터 도출한 성능곡선을 조건으로 입력하여 실제 현상에 가까운 시뮬레이션을 할 수 있다. 그리고 팬 날개수 증가에 따른 해석을 수행하여, 날개수 변경에 따른 성능개선의 여지를 확인 하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.4
• /
• pp.221-228
• /
• 2019

Experimental investigation was performed to analyze the flow field characteristics and power generation performance for a shroud tidal power generation system. Electrical power output was compared with the rotational speed of the turbine blade and electric load connected to the generator for various flow velocity. As the electrical load decreased, the speed of the turbine increased rapidly and reached by about 2 times. The power output also increased remarkably with the decrease of load, and then decreased after maximum power point. In addition, the maximum power point appeared at high electrical loads as the experimental flow velocity increased. These results of the flow field characteristics and power generation performance analysis of the shroud tidal power generation system variation with the flow velocity conditions and electrical load are expected to be the basic data necessary for the development of efficient shroud tidal power generation system.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.64-73
• /
• 2007

A Large thermal vacuum chamber (LTVC) for space environment simulation on large satellites was successfully developed and constructed by KARI (Korea Aerospace Research Institute) in Korea with a local company. This chamber has an effective diameter of 8 meters and depth of 10 meters, and is composed of vacuum system, thermal control system, and anti-vibration system. Temperature below $-190^{\circ}C$ is maintained over the thermal shroud wrapping a satellite under $3.7{\times}10^{-5}Pa$ ($5{\times}10^{-7}torr$) vacuum level, and optical test can be done in this chamber by seismic mass with $10^{-5}g_{rms}$ or lower vibration level. In addition, the shroud temperature can be increased up to $123^{\circ}C$ using halogen lamps. Chamber control program based on PLC (Programmable Logic Controller) could control this large thermal vacuum chamber automatically.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.1
• /
• pp.1-10
• /
• 2022

In this study, the two horizontal shroud tidal current energy converter, which can generate power even under low flow speed conditions, was developed. In order to determine the shape of the shroud system, a three-dimensional numerical simulation test was conducted, and a 1/6 scale down model was made to perform a hydraulic model experiment. The hydraulic model experiment was performed under four flow conditions, and the flow speed, torque, and RPM were measured for each experimental case. As a result of the numerical simulation test, it was found that the flow speeds passing through the nozzle were increased by about 2~3 times in the cylinder, and when the extension ratio was 2:1, the highest flow speed was shown. In addition, it was found that the flow speeds increased 2.8 times when the diameter ratio between the nozzle and the cylinder was 1.5:1. Meanwhile, as a result of the hydraulic model experiment, it was found that when the tip speed ratio was between 1.75 and 2, the power coefficient was 0.32 to 0.34.

• Journal of KSNVE
• /
• v.11 no.1
• /
• pp.21-25
• /
• 2001

축류 홴은 산업에의 응용 범위가 매우 넓은 장치로서 HVAC 기기를 중심으로 다양한 분야에서 이용되고 있다. 저소음 홴 설계는 품질 고급화 요구 및 법적 규제에 따라 매우 시급한 과제이다. 그러나 홴 소음 해석의 난해함과 더불어 복잡한 주변 기기(쉬라우드 및 열교환기 등)와의 상호 작용 때문에 현재까지는 주로 실험적 접근을 통해 홴의 저소음화를 추구하였다.(중략)