• 대한화학회지
• /
• 제25권5호
• /
• pp.300-305
• /
• 1981

콩깻묵과 들깻묵을 각각 인산화 및 술폰화하여 이온교환체를 만들었다. 이렇게 만든 40-60 매쉬의 이온교환체를 사용하여 여러농도의 염산과 알코올 혼합용매에서 이온교환용량, 몇가지 금속 이온에 대한 흡착능 및 분포계수를 알아보았다. 깻묵 이온교환체의 이온교환용량은 4 meq/g 이상이었으며, 깻묵 이온교환체에 대한 금속이온은 일반적으로 pH가 증가함에 따라 증가하였다. 특히 술폰화된 콩깻묵 이온교환체에서는 Co(II)가 높은 흡착을 나타내었다. 또한 분포계수는 여러 금속에 있어서 알코올 용매분자의 탄소수가 증가하거나 히드록시기의 수가 증가함에 따라 감소한다. 이는 알킬기의 입체이성 현상이나, 리간드의 인력이 크게 작용했기 때문인 것으로 보인다. 만들어진 콩깻묵 이온교환체는 시판되는 이온교환체와 거의 비슷한 이온교환능을 가지고 있음을 알 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제18권4호
• /
• pp.391-398
• /
• 2007

The covalently cross-linked sulfonated polyetheretherketone (CL-SPEEK) membrane was prepared by four-step synthesis of sulfonation-sulfochlorination, partial reduction, lithiation, and cross-linking, and its electrochemical and mechanical properties were investigated for water electrolysis application. The prepared ion exchange membranes showed good electrochemical and mechanical properties; proton conductivity of 0.116 S/cm at $80^{\circ}C$, water uptake of 44.6%, ion exchange capacity of 1.75 meq/g-dry-memb., tensile strength of 64.25 MPa and elongation of 61.11%. The membrane electrode assembly (MEA) with homemade membranes were prepared by non-equilibrium impregnation-reduction (I-R) method. Especially, the electrochemical surface area (ESA) and roughness factor of CL-SPEEK electrolyte by cyclic voltammetry method were 23.46 $m^2/g$ and 307.3 $cm^2-Pt/cm^2$, respectively. The prepared MEA was used in the unit cell of water electrolysis and the cell voltage was 1.81 V at 1 A/$cm^2$ and $80^{\circ}C$, with platinum loadings of 1.31 mg/$cm^2$.

• 한국수소및신에너지학회논문집
• /
• 제26권3호
• /
• pp.212-220
• /
• 2015

The engineering plastic of sulfonated polyether ether ketone (SPEEK) as a polymer matrix has been developed in this lab to replace Nafion, solid polymer electrolytes of perfluorosulfonic acid membrane which has several flaws such as high cost, and limited operational temperature above $80^{\circ}C$. The SPEEK was prepared in the sulfonation reaction of polyether ether ketone (PEEK). The organic-inorganic blended composite membranes were prepared by sol-gel casting method with loading the highly dispersed ceria and cesium-substituted tungstosilicic acid (Cs-TSiA) with cross-linking agent contents of 0.01 mL. In conclusion, CL-SPEEK/Cs-TSiA/ceria 1% membrane showed the optimum results such as 0.1882 S/cm of proton conductivity at $80^{\circ}C$, and 99.61 MPa of tensile strength which were better than Nafion 117 membrane.

• 한국수소및신에너지학회논문집
• /
• 제16권2호
• /
• pp.103-110
• /
• 2005

Proton conducting solid polymer electrolyte (SPE) membranes have been used in many energy technological applications such as water electolysis, fuel cells, redox-flow battery, and other electrochemical devices. The availability of stable membranes with good electrochemical characteristics as proton conductivity at high temperatures above 80 $^{\circ}C$ and low cost are very important for its applications. However, the presently available perfluorinated ionomers are not applicable because of high manufacturing cost and high temperature use to the decrease in the proton conductivity and mechanical strength. In order to make up for the weak points, the block copolymer (BPSf) of polysulfone and poly (phenylene sulfide sulfone) were synthesized and sulfonated. The electrolyte membranes were prepared with phosphotungstic acid (HPA)/sulfonated BPSf via solution blending. This study would be desirable to investigate the interaction between the HPA and sulfonated polysulfone. The results showed that the characteristics of SPSf/HPA blend membrane was a better than Nafion at high temperature, 100 $^{\circ}C$. These membranes proved to have a high proton conductivity, $6.29{\times}10-2$ S/cm, a water content, 23.9%, and a ion exchange capacity, 1.97 meq./g dry membrane. Moreover, some of the membranes kept their high thermal and mechanical stability.

• 한국수소및신에너지학회논문집
• /
• 제20권2호
• /
• pp.95-103
• /
• 2009

In order to improve the electrochemical, mechanical and electrocatalytic characteristics, engineering plastic of polyether ether ketone (PEEK) as polymer matrix was sulfonated (SPEEK) and the organic-inorganic blend composite membranes has been prepared by loading heteropoly acids (HPAs), including tungstophosphoric acid (TPA), molybdophosphoric acid (MoPA), and tungstosilicic acid (TSiA). And then these were covalently cross-linked (CL-SPEEK/HPA) as the electrolyte and MEA of polymer electrolyte membrane electrolysis (PEME). As a result, the optimum reaction conditions of CL-SPEEK/HPA was established and the electrochemical characteristics such as ion conductivity ($\sigma$) were in the order of magnitude: CL-SPEEK /TPA30 (${\sigma}=0.128\;S/cm^{-1}$) < /MoPA40 (${\sigma}=0.14\;S/cm^{-1})$ < /TSiA30 (${\sigma}=0.22\;S/cm^{-1}$) at $80^{\circ}C$, and mechanical characteristics such as tensile strength: CL-SPEEK /TSiA30 $\fallingdotseq$ /MoPA40 < /TPA30. Consequently, in regards of above characterisitics and oxidation durability, the CL-SPEEK/TPA30 exhibited a better performance in PEME than the others, but CL-SPEEK/MoPA40 showed the best electrocatalytic activity of cell voltage 1.71 V among the composite membranes. The dual effect of higher proton conductivity and electrocatalytic activity with the addition of HPAs, causes a synergy effect.

• 한국수소및신에너지학회논문집
• /
• 제25권2호
• /
• pp.151-160
• /
• 2014

CL-SPEEK/Cs-TPA/$CeO_2$ composite membrane was prepared for polymer electrolyte membrane water electrolysis (PEMWE). In order to improve the electrochemical, mechanical, durabilities and electrocatalytic characteristics, engineering plastic of polyether ether ketone (PEEK) as polymer matrix was sulfonated and the organic-inorganic blend composite membranes was prepared by loading cesium-substituted tungstophosphoric acid (Cs-TPA) by titration method with cross-linking agent contents of 0.01mL. Ceria ($CeO_2$) was used to scavenge free radicals which attack the membrane in the PEMWE circumstance and to increase the duration of the membrane. CL-SPEEK/$Cs_{(1)}$-TPA/CeriaIn conclusion, 1% membrane showed the optimum results such as 0.119 S/cm at $80^{\circ}C$ of proton conductivity and 62MPa of tensile strength.

• 멤브레인
• /
• 제21권3호
• /
• pp.247-255
• /
• 2011

본 연구에서는 뛰어난 전도도와 물리적 강도를 가지는 그라핀의 고른 분산성을 얻기 위하여 두 가지 다른 방법으로 그라핀을 개질시켰다. 그리고 SPAES/그라핀 복합막은 각기 다른 함량을 첨가하여 제조되었으며 그라핀의 제조방법과 첨가된 그라핀의 함량에 따른 성능을 비교하였다. 복합막의 모폴로지는 SEM을 이용하여 관찰하였으며 개질된 그라핀의 화학적 구조는 FT-IR과 TGA를 사용하여 분석되었다. 그라핀의 함량변화가 0.5~3.0 wt% 일 때 복합막의 이온전도도와 메탄올 투과도를 측정하였으며 $80^{\circ}C$, 100% 가습상태에서 SPAES/그라핀 복합막의 이온전도도(0.216 S/cm)는 순수한 SPAES 전해질 막보다 높은 이온전도도(0.098 S/cm)를 나타내었으며 그라핀의 함량이 1.5 wt%까지 증가될 때 메탄올 투과도는 감소되었다.

• 공업화학
• /
• 제4권2호
• /
• pp.381-392
• /
• 1993

탄소수 10~18 범위에 있는 고급지방산 즉, decanoic acid, dodecanoic acid, tetradecanoic acid, hexadecanoic acid 및 octadecanoic acid 등을 $SO_3$-dioxane complex로 ${\alpha}$-술폰화 한 다음, dodecanol-1에 에틸렌옥사이드를 5몰, 10몰, 20몰씩 부가시켜 제조한 POE 알킬 에테르류와 각각 반응시켜 15종의 올리고머 음이온성 계면활성제를 좋은 수율로 합성하였고, 이들 최종 합성화합물에 대하여 IR, NMR, 원서분석 등 기기분석을 행하여 분리확인하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 추계 총회 및 학술발표회
• /
• pp.61-63
• /
• 2003

A major research objective related to proton exchange membrane(PEM) for DMFC is to achieve high proton conductivity over 10$^{-2}$ S/cm, high hydrolytic stability and low methanol permeability with low cost base materials. for the purpose, a lot of thermoplastic polymers such as polysulfones, polyethersulfone, polyetherketones, polyimides, polyoxadiazole, polyphosphazene and polybenzimidazol have been investigated. Amongst those polymers, polyimides have been suggested as a potential PEM due to their excellent thermal, chemical stability and good mechanical properties. Generally, polyimides are synthesized by polycondensation with numerious diamines and dianhydriedes. In our study, polyimide was prepared using non-sulfonated diamine, sulfonated diamine directly synthesized by fuming sulfuric acid, and naphthalenic dianhydride to improve the hydrolysis stability under acidic condition. Through monomer sulfonation-subsequent polymerization method, the high proton conducting capability and the desired sulfonation level were effectively controlled at the same time. To reduce severe methanol transport through the membrane, the chemical crosslinking among polymer chains was introduced using various crosslinking agents with different chain lengths. The crosslinked sulfonated polyimide membranes showed high proton conductivity up to 8.09$\times$10$^{-2}$ S/cm and from crosslinking effect methanol transport through the membranes was considerably reduced as compared with unmodified membranes. For increase of chain length of crosslinker, methanol permeability was adversely reduced to 10$^{-8}$ $\textrm{cm}^2$/s due to decrease of IEC and increase of crosslinking desity.

• 한국수소및신에너지학회논문집
• /
• 제25권1호
• /
• pp.1-10
• /
• 2014

Ceria ($CeO_2$) was used to scavenge free radicals which attack the membrane in the polymer electrolyte membrane water electrolysis (PEMWE) circumstance and to increase the duration of the membrane. In order to improve the electrochemical, mechanical and electrocatalytic characteristics, engineering plastic of the sulfonated polyether ether ketone (SPEEK) as polymer matrix was prepared in the sulfonation reaction of polyether ether ketone (PEEK) and the organic-inorganic blended composite membranes were prepared by sol-gel casting method with loading the highly dispersed ceria and cesium-substituted phophomolybdic acid(Cs-MoPA) with cross-linking agent contents of 0.01mL. In conclusion, CL-SPEEK/$Cs_{(2.5)}$-MoPA/ceria(1%) membrane showed the optimum results such as 0.1095S/cm of proton conductivity at $80^{\circ}C$, 2.906meq./g-dry-membrane of ion exchange capacity and mechanical characteristics, and 49.73MPa of tensile strength which were better than Nafion 117 membrane.