• Title/Summary/Keyword: 순환식

Search Result 1,042, Processing Time 0.031 seconds

고밀집 섬유집합체에 의해 유도된 모세관현상을 이용한 순환식 수은전극 전해계의 개발과 그 특성 연구

  • 김광욱;변기호;이일희;유재형;박현수
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1996.05c
    • /
    • pp.565-570
    • /
    • 1996
  • 본 연구에서는 고밀집 섬유다발체 내에 수은과 금속이온을 함유한 수용액을 동시에 주입시켜 최소 공간에서 최대한의 수은전극 면적을 갖는 수직형 순환식 수은 모세관 다발체 전극 전해반응 장치가 개발되었다. 이장치의 특성과 안정성을 평가하기 위해 수은과 수용액의 유량 변화에 따른 철(III)과 우라늄(IV)이온의 환원 voltammogram 이 측정되었다. 본 연구에서 개발된 수직형 순환식 수은 모세관 다발체 전극 전해계는 정확히 제어되는 수용액 유량조건에서 수용액내의 금속이온의 산화수 상태 및 농도의 연속적인 분석 및 전해반응 기구 해석에 효과적으로 사용될 수 있음을 알 수 있었다.

  • PDF

Water Quality Control in the Semiclosed Culture System Growing a Flounder, Paralichthys Olivaceus (반폐쇄 순환여과식 넙치양식장의 수질제어에 관한 연구)

  • YANG Byung-Soo;LEE Heon-Mo;JEONG Byung-Gon
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.25 no.3
    • /
    • pp.197-204
    • /
    • 1992
  • A comparative evaluation of water quality in the existing semiclosed fish culture system was made to improve the system management. From the comparison of water quality between the flow-through mode and the recycle mode of the semiclosed system, the malfunctioning of the settling channel deteriorated water quality and reduce the nitrification rate in the recycle mode. The peak concentrations of COD, $PO_4-P$ and SS in the fish tanks appeared just after feeding, and then decreased to normal levels within two hours. However, the $NH_4-N$ concentration increased slightly after two hours of feeding in the recycle mode. The water exchange rate was directly related to the water quality in the semiclosed fish culture system.

  • PDF

Conceptual Design of 50 kW thermal Chemical-Looping Combustor and Analysis of Variables (열량기준 50kW급 매체순환식 가스연소기의 개념설계 및 변수해석)

  • 류호정;진경태
    • Journal of Energy Engineering
    • /
    • v.12 no.4
    • /
    • pp.289-301
    • /
    • 2003
  • To develop a chemical-looping combustion technology, conceptual design of 50 kW thermal chemical-looping combustor, which is composed of two interconnected pressurized circulating fluidized beds, was performed by means of mass and energy balance calculations. A riser type fast fluidized bed was selected as an oxidizer and a bubbling fluidized bed was selected as a reducer by mass balance for the chemical-looping combustor. Calculated values of bed mass, solid circulation flux, and reactor dimension by mass and energy balance calculations were suitable for construction and operation of chemical-looping combustor. It is concluded from the comparison of the design results and operating values of commercial circulating fluidized bed that the process outline is realistic. Moreover, the previous results support that oxygen carrier particle, NiO/bentonite, fulfills the conversion rates needed for the proposed design. The effects of system capacity, metal oxide content in a oxygen carrier particle, amount of steam input, gas velocity, and solid depth on design values were investigated and the changes in the system performance can be estimated by proposed design tool.

A Study on the Quality Properties of Recycled Sand by Produced Dry Manufacturing System and Wet Manufacturing System (건식생산 및 습식생산시스템에 의해 생산된 순환모래의 품질특성에 관한 연구)

  • Song, Ha-Young;Lee, Sang-Soo;Lee, Ji-Hwan;Lee, Yun-Seong
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.4 no.2
    • /
    • pp.74-84
    • /
    • 2009
  • The study aims that high quality recycled sand by wet manufacturing system can be used in practical way through basic material property. The basic material property test was done by 4 categories, dry manufacturing system (1) tandem and (2) parallel, wet manufacturing system (3) large capacity and (4) small capacity. RS-IV is the final production of (1) to (4) method, it is tested via KS F 2573 (recycled fine aggregate). RS-IV is satisfied with 4 items, those are absolute dry density, 0.08mm sieve throughput, clay lump amount, and organic impurity substance content. However, absorptivity item has problem in (1) and (2) method, (3) and (4) method are confirmed with norms 5% low. Also, the production quality of wet manufacturing system is better than dry manufacturing system in absolute dry density, absorptivity, 0.08mm sieve throughput, and clay lump amount.

  • PDF

Characteristics of Carbon Deposition and Cyclic Test of Oxygen Carrier Particle for Chemical-Looping Combustor (매체순환식 가스연소기 산소공여입자의 탄소침적 및 반복실험 특성)

  • 김민수;임남윤;류호정;배달희;진경태
    • Proceedings of the Korea Society for Energy Engineering kosee Conference
    • /
    • 2002.05a
    • /
    • pp.79-83
    • /
    • 2002
  • 새로운 가스연소 개념인 매체순환식 가스연소기(Chemical-Looping Combustor, CLC)는 공기와 기체연료(H$_2$, CO, CH$_4$ 등)가 직접 접촉하여 연소하는 기존의 연소-발전 시스템에 비해 많은 장점들을 가지고 있다. 매체순환식 가스연소기의 기본개념은 Fig. 1에 나타내었다.(중략)

  • PDF

Nutrient Solution Control for Recirculating Hydroponics in Successive Culture of Lettuce (재순환식 상추 양액재배를 위한 양액관리 기술)

  • 이수연;이성재;서명훈;이상우;심상연
    • Proceedings of the Korean Society for Bio-Environment Control Conference
    • /
    • 1998.10a
    • /
    • pp.92-94
    • /
    • 1998
  • 최근 도시근교 시설재배토양의 염류 과다집적과 연작장해 발생으로 생산성이 저하되고 있다. 그리고 고품질 연중생산이 가능한 양액 재배 면적이 '93년 23ha에서 '97년 414ha로 급속히 증가되고 있는데 이 중 약12%가 담액경이나 박막수경의 순수 수경재배 방식이 차지하고 있다. 순환식 담액수경 상추재배를 기준으로 할 때 농가 300평 재배시 약 100ton의 양액이 소요되며 이 양액은 1회 재배가 끝난 후 상당량이 폐기되고 있고 고형 배지경 양액 재배의 경우에도 대부분 비 순환식 재배로 1회 관수 후 나오는 배액이 그대로 버려지고 이어 토양 및 지하수 등 환경오염, 자원 낭비 등의 여러 가지 문제를 야기시키고 있다. (중략)

  • PDF

Separation and Collection of Carbon Dioxide using Circulatory Hollow Fiber Membrane Contactor (순환식 중공사막 접촉기를 이용한 이산화탄소의 분리 및 기술)

  • 이용희;이용택;박유인;이규호
    • Proceedings of the Membrane Society of Korea Conference
    • /
    • 1998.10a
    • /
    • pp.50-52
    • /
    • 1998
  • 1. 서론 : 오래전부터 기체를 액상에 분산시킴으로써 물질 전달 속도를 증가시킴과 동시에 기-액간의 접촉면적을 넓히려는 연구 즉, 기-액간의 접촉 경계면을 통하여 이루어지는 기체흡수에 관한 연구가 다각적으로 이루어져 왔다. 그러나, 기존의 흡수장치에서는 기-액간의 접촉면적을 정확히 계산할 수 없고, 기체에 의한 액체의 범람이나 편류현상등이 발생하여 액체나 기체의 유속에 제한을 주는 등 기술적인 문제점을 가지고 있다. 따라서 이러한 기존 흡수공정들의 문제점을 극복하기 위하여 최근에 제안된 것이 막을 이용하여 기체와 흡수제인 액체의 접촉을 인위적으로 제어할 수 있는 중공사막 접촉기이다. 본 연구에서는 수용성 흡수제가 흡수모듈과 탈착모듈을 순환하는 순환식 중공사막 접촉기를 이용하여 혼합기체(N$_2$/CO$_2$ = 80/20)로부터 이산화탄소를 선택적으로 분리.회수하고자 하였으며, 또한 흡수제의 농도, 유속변화, 그리고 진공식 탈착모듈에서 압력변화에 따른 기체투과 특성을 고찰함으로써 운전조건의 최적화와 그 응용 가능성을 제시하고자 하였다.

  • PDF

A Study on the Baggage Allocation Method of Passenger-Baggage Hybrid Train (여객-화물 복합열차의 화물 배치방법에 관한 연구)

  • Choi, Yong Hoon;Shin, Sang Hoon;Han, Gee Pyeong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.16 no.5
    • /
    • pp.3426-3433
    • /
    • 2015
  • Three baggage allocation methods of passenger-baggage hybrid train in restricted railway transportation capacity including round conveyor system, vertical circulation system, and horizontal circulation system are presented. Loading/Unloading time is calculated based on the volume transported from Busan to Seoul via Daegu, Daejeon, and Osong with the parcel company P's logistics data. The horizontal circulation system shows less baggage volume capacity to be allocated and the maximum loading/unloading time with 434 secs. The vertical circulation system presents more loading time, but it shows best result with 408 secs. Loading/Unloading times are compared for each system and useful method is presented to improve transportation efficiency of the train.