• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.220-225
• /
• 1998

압축성 초탄성 평판의 순수굽힘에 대한 비선형 변형해석의 수학적 정해가 본 논문에 구해져 있다. 이차원 평면 변형도 상태가 해석을 위하여 가정되었으며, 비선형 순수굽힘 변형해석결과는 고전적인 선형 순수굽힘 변형해석결과와 비교되었다. 고전적인 선형굽힘 결과와는 다르게 비선형 순수굽힘 상태에서는 반경방향응력은 영이 아니며 또한 각방향응력도 선형 상태가 아닌 것으로 규명되었다.

• Journal of the KSME
• /
• v.32 no.6
• /
• pp.536-553
• /
• 1992

하중 종류 중에서 가장 기본적인 하중 중의 하나인 순수 전단력과 순수 굽힘 모멘트를 발생시 키고자 할 때는 아래와 같은 장치를 사용하는 것이 좋다. 1) 등방성체나 이방성체의 횡 전단계수 (G$_{12}$)와 횡 응력 프린지치(f$_{12}$) 등을 측정 하고자 할 때, 또는 모드 II (mode II)상태의 파괴역학을 연구하고자 할 때는 그림 1, 그림 2, 그림 3 그리고 그림 4 등에 제시된 것 중에서 적당한 것을 사용할 수 있다. 그러나 순수 전단 력이 발생되는 면적이 크고, 순수 전단력을 정확하고 균일하게 발생시키고자 할 때, 각 재료의 전단 물성치(shear properties) 측정, 모드II(mode II) 상태의 파괴역학을 연구하고자 할 때는 본 연구자가 고안한 H.I.S.T. 장치를 이용하면 편리하다. 2) 직선 보에 순수 굽힘 모멘트를 균일하고 정확하게 가하고자 할 대는 N.B.M.장치를 사용하는 것이 좋다. 또 N.B.M. 장치는 어느 보의 장치보다도 곡선보나 변형이 큰 보에도 더 정확하고 균일하게 순수 굽힘 모멘트를 발생시킬 수 있다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.222-233
• /
• 1998

A 4-point pure bending res machine is developed the evaluate the pure vending moment-rotation properties of the thin-walled tubes without imposing shear and tensile forces. The moment-rotation properties of the thin-walled tubes are measured up to and beyond collapse with the pure bending test machine. The test results are compared with those of finite element analyses and existing analytical solution.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.9
• /
• pp.37-44
• /
• 1997

In this paper the bending collapse characteristics of square and rectangular steel tubes were studied with the pure bending test machine which apply pure bending moment without imposing shear and tensile forces. Under pure bending moment, delayed buckling modes occur and depend on test length and shape of section. For delayed mode, the endrgy of bending moment is absorbed by strain hardening energy. The pre- dictions of maximum moment and moment-rotation angle curve from those concepts are in good agreement with experimental observations.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.350-355
• /
• 1998

본 논문은 다양한 파괴역학 해석방법을 이용하여 원주방향 관통균열이 존재하는 탄소강 및 스레인레스강 배관의 하중 지지능력을 예측하기 위한 것이다. 이를 위해 실제적인 기본모델과 배관 및 균열의 형상, 재료물성치를 변화시킨 가상적인 특정모델을 대상으로 순수 굽힘하중 작용조건에서의 공학적 해석 및 유한요소해석을 수행하였으며, 타당성 검토를 위해 문헌에 제시된 실험결과와 비교하였다. 비교결과, 예측한 하중 지지능력은 각 평가방법 뿐만 아니라 배관 및 균열의 형상, 재료특성 등에 따라서도 차이를 보였으나, 전반적으로는 실험결과에 비해 보수적인 결과를 제시하는 것으로 나타났다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.1
• /
• pp.18-23
• /
• 1985

In the fracture mechanics, the determination of the stress intensity factor value is vital for the prediction of a material fracture behavior. So many data concerning to the S.I.F. have been presented by many investigations to meet endless requrement. In this paper, the stress intensity factors of a sheet with an eccentrically inclined crack subjected to the pure bending moment were investigated theoretically by using of the complex mapping function to determine the Muskelishvili's comlex stress functions. Moreover, the theoretical value was compared with the result obtained from photoelastic esperiment. As a result, it was confirmed that both values coincided with satisfactorily within the margin of 2-3% devition; The results theoretically derived are right.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.12
• /
• pp.1387-1394
• /
• 2014

In a photoelastic experiment, it is necessary to know the material stress fringe constant of the photoelastic specimen to determine the stresses from the measured isochromatic fringe orders. The material stress fringe constant can be obtained using a simple tension specimen and/or a circular disk under diametric compression. In these methods, there is generally a need to apply numerous loads to the specimen in response to the relationship of the fringe order. Then, the least squares method is used to obtain the material constant. In this paper, the fringe orders that appear on a four-point bending specimen are used to determine the fringe constant. This method requires four photoelastic fringes obtained from a circular polariscope by rotating the analyzer to 0, ${\pi}/4$, ${\pi}/2$, and $3{\pi}/4$ radians. Using the four-point bending specimen to determine the material stress fringe constant has an advantage because measurements can be made at different locations by applying a constant load. The stress fringe constant measured with this method is within the range suggested by the manufacturer of the photoelastic material.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.4
• /
• pp.59-66
• /
• 2008

This paper has proposed a new parameter to interpret the effects of plastic deformation in bending of strips in cylindrical die and punch. With reference to the parameter, we have provided an insight on the separation between strips and punches, the occurrence of the multi-point bending during the process of deformation, the final shapes of strips, and the springback ratios. Also using the parameter, we have considered the different effects between the bending deformation in the cylindrical die and the bending deformation due to pure bending.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.4
• /
• pp.132-139
• /
• 2004

The open section members have been used as the members of vehicle such as automotives, airplanes and trains. When vehicles are crashed, these members have absorption of the energy and it is necessary for retainment of the survival space, and as the result, the prediction for the displacement of members in this case of the crash of vehicles is very important. The displacements of members in this case of the crash of automotives show combined aspect of both axial collapse and bending collapse. In the rollover accident when bending collapse happen, the collapse of each members is progressed by the plastic hinge which made from bending moment, and therefore the research for the behavior of members under bending moment after collapse is necessary to determine the internal energy which the members can absorb and the deformed shapes of the members on the step of design. In this paper, the characteristics of bending collapse at the members of the open cross-section were studied with experiment and numerical analysis. We made a comparative studied of the result of the experiment, and changed the axis according to the parallel-axis theorem.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.6
• /
• pp.56-64
• /
• 2004

Several types of steel structures which are employed in offshore petroleum activities are constructed with tubular members. These structures are usually subjected to various types of loads such as normal functional loads and environmental loads. Furthermore, accidental loads may also act on the leg or bracing members due to supply boat collisions and objects droppings from platform decks. The extent of damage caused by these loads ranges from total collapse of the structure to small damage which may not have serious consequence at the time of accident. To make optimal design decisions regarding structural safety and economical efficiency, it is very important to be able to assess the influence of damages on the performance of damaged structural members. In the End report, a series of calculations is performed to study the effects of different parameters on the load carrying capacity of such damaged members under pure bending. And the results of analysis are compared with experiment results.