• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2004.11a
• /
• pp.101-113
• /
• 2004

본 연구는 기술혁신파급경로를 결정하는 국가 간 무역역할에 대한 실증적인 분석을 목적으로 한다 이 연구목적을 위하여, 최근 자료인 1980년부터 2003년까지 15개 OECD국가를 대상으로 자국의 기술혁신을 결정하는 중요한 변수로 알려진 자국 R&D축적 및 무역대상국의 R&D축적자료를 구축하였으며, 이를 무역지수인 쌍방간에 수출 및 수입량을 경제규모로 나눈 가중지수를 이용하여 유입된 R&D축적량을 구축하였다. 또한 대상변수들의 기술혁신파급역할에 대하여 최근 논의되고 있는 비정상적 패널기법을 이용하여 분석하였다. 최근 제안되고 있는 비정상적 패널기법을 이용하여 국제 간에 기술혁신파급경로를 분석한 결과를 간단하게 요약하면, 다음과 같다. 첫째, 분석대상변수들은 비정상성을 갖는 것으로 나타났다. 둘째, 그러나 장기적으로 분석대상변수들이 서로 균형상태를 나타내는 공적분관계에 있음을 알 수 있었다. 셋째, 국가 간에 기술혁신파급경로의 방향과 정도를 파악하기 위하여 패널 공적분계수를 추정하였으나, 설정함수형태에 따라서 여러 가지 상반된 실증결과가 나타났다. 따라서 기존 연구Coe et al., 1995, Keller, 1998, Kao, et al., 1999 그리고 Funk, 2001]의 분석결과 및 그 시사점들이 서로 다른 이유는 분석대상변수들의 선택차이뿐만 아니라, 기술혁신경로에 대한 설정함수형태에 따라서 서로 다른 분석결과가 나타날 수 있는 가능성을 보여준다. 본 연구에서 나타난 분석결과의 시사점을 보면, 국가 간에 기술혁신파급경로분석은 기술혁신파급을 결정하는 매개변수선정도 중요하지만, 결정된 설명변수들 사이에 어떤 기술혁신파급에 관한 연관관계가 존재하는지에 대한 실증분석 즉 파급경로분석도 매우 중요함을 보여준다. 이러한 파급경로분석에는 기존의 선형가정뿐만 아니라 비선형가정을 이용한 기술파급경로분석을 통한 시사점제안이 요구된다.관적인 시스템을 제공하는 것이다.가 생성된다. $M_{C}$에 CaC $l_2$를 첨가한 경우 $M_{C}$는 완전히 $M_{Cl}$ 로 전이를 하였다. $M_{Cl}$ 에 CaC $l_2$를 첨가하였을 경우에는 아무런 수화물의 변화는 발생하지 않았다. 따라서 CaS $O_4$.2$H_2O$를 CaC $O_3$및 CaC $l_2$와 반응시켰을 때의 AFm상의 안정성 순서는 $M_{S}$ < $M_{C}$< $M_{Cl}$ 로 된다.phy. Finally, Regional Development and Regional Environmental Problems were highly correlated with accommodators.젼 공정을 거쳐 제조된다는 점을 고려할 때 이용가능한 에너지 함량계산에 직접 활용될 수는 없을 것이다.총단백질 및 AST에서 시간경과에 따른 삼투압 조절 능력에 문제가 있는 것으로 보여진다.c}C$에서 5시간 가열조리 후 잔존율은 각각 84.7% 및 73.3%였고, 질소가스 통기하에서는 잔존율이 88.9% 및 81.8%로 더욱 안정하였다.8% 및 12.44%, 201일 이상의 경우 13.17% 및 11.30%로 201일 이상의 유기의 경우에만 대조구와 삭제 구간에 유의적인(p<0.05) 차이를 나타내었다.는 담수(淡水)에서 10%o의 해수(海水)로 이주된지 14일(日) 이후에 신장(腎臟)에서 수축된 것으로 나타났다. 30%o의 해수(海水)에 적응(適應)된 틸라피아의 평균 신사구체(腎絲球體)의 면적은 담수(淡水)에 적응된 개체의 면적보다 유의성

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.689-696
• /
• 2017

The practical applications of ordinary high-fluidity concrete have been limited due to several drawbacks, such as high hydration heat, high amount of shrinkage, and non-economic strength development. On the other hand, due to its advantages, such as improvement of construction quality, reduction of construction cost and period, the development of high-fluidity concrete is a pressing need. This study examined the properties of high-fluidity concrete, which can be manufactured on the low binders using a viscosity agent to prevent the segregation of materials. The optimal viscosity agent was selected by an evaluation of the mechanical properties of high-fluidity concrete among six viscosity agents. The acrylic type and urethane type viscosity agents showed the best performance within the range where no material separation occurred. The mechanical properties were evaluated to examine the optimal amount of AC and UT viscosity agent added by mixing two viscosity agents according to the adding ratio and blending them together with high performance water reducing agent. When the ratio of the AC : UT viscosity agents was 5:5, it was most suited for high-fluidity concrete with low binders by increasing the workability and effect of the reducing viscosity.

• 한국정보통신설비학회:학술대회논문집
• /
• 2004.08a
• /
• pp.282-290
• /
• 2004

80년대 초반에 등장한 퍼스널 컴퓨터에서부터 90년대에 급격히 확산된 클라이언트/서버 환경에 이르기까지 분산 컴퓨팅은 관리가 어렵다고 증명되었다. IBM의 Tivoli나 HP의 OpenView 등을 포함한 거대한 엔터프라이즈 관리 시스템 산업이 이러한 표면상의 극복하기 힘든 법칙처럼 여겨지는 것이 그 증거라고 하겠다. 이 후 무선의 개념이 등장했다. NOP World Technology가 Cisco사를 위해 2001년에 시행한 조사에 의하면 최종 사용자는 무선랜을 사용함으로써 생산성이 최고 22% 향상되었고 조사대상의 63%가 일상적인 직무에서 정확도가 향상되었다. 이 모든 것은 투자대비수익(ROI) 계산상 사용자 당 $550 해당한다. 현재 이동성과 IT 관리 기능의 딜레마를 동시에 고려하며 저렴한 몇몇 솔루션들이 소개되고 있다. 본 논문에서는 분산 컴퓨팅의 다음 진화 단계인 무선 네트워킹과 관련된 문제를 해결할 수 있는 혁신적이고 전체적인 접근법을 소개한다. 본 논문에서는 무선 컴퓨팅과 보안의 본질 및 무선랜이라는 새로운 컴퓨팅 패러다임으로 인하여 파생되는 운영과 관리의 어려움을 소개한다. 이러한 환경이 정의되면 본 논문은 이해하기 쉬운 5x5 레이어 매트릭스를 바탕으로 각 레이어의 독특한 본질을 고려한 혁신적인 무선랜 관리 방법에 대해 설명한다. 마지막으로 무선 네트워킹, 컨버젼스, 궁극적으로 분산 컴퓨팅만이 가지는 문제점을 해결할 수 있는 Red-M의 백 오피스 애플리케이션에 기반한 솔루션을 소개한다. 본 논문의 목표는 Red-M의 성공에 관한 두 가지 중요한 과정을 설명하고자 함이다. 이는 안전한 무선 네트워크 제어에서 비롯되는 무선 환경이 약속하는 장점들을 고루 제공하는 것과 나쁜 의도의 사용자를 차단할 뿐 아니라 올바른 사용자와 또한 나머지 일반 사용자를 총체적으로 관리할 수 있는, 안정적이고 확장 가능하며 직관적인 시스템을 제공하는 것이다.가 생성된다. $M_{C}$에 CaC $l_2$를 첨가한 경우 $M_{C}$는 완전히 $M_{Cl}$ 로 전이를 하였다. $M_{Cl}$ 에 CaC $l_2$를 첨가하였을 경우에는 아무런 수화물의 변화는 발생하지 않았다. 따라서 CaS $O_4$.2$H_2O$를 CaC $O_3$및 CaC $l_2$와 반응시켰을 때의 AFm상의 안정성 순서는 $M_{S}$ < $M_{C}$< $M_{Cl}$ 로 된다.phy. Finally, Regional Development and Regional Environmental Problems were highly correlated with accommodators.젼 공정을 거쳐 제조된다는 점을 고려할 때 이용가능한 에너지 함량계산에 직접 활용될 수는 없을 것이다.총단백질 및 AST에서 시간경과에 따른 삼투압 조절 능력에 문제가 있는 것으로 보여진다.c}C$에서 5시간 가열조리 후 잔존율은 각각 84.7% 및 73.3%였고, 질소가스 통기하에서는 잔존율이 88.9% 및 81.8%로 더욱 안정하였다.8% 및 12.44%, 201일 이상의 경우 13.17% 및 11.30%로 201일 이상의 유기의 경우에만 대조구와 삭제 구간에 유의적인(p<0.05) 차이를 나타내었다.는 담수(淡水)에서 10%o의 해수(海水)로 이주된지 14일(日) 이후에 신장(腎臟)에서 수축된 것으로 나타났다. 30%o의 해수(海水)에 적응(適應)된 틸라피아의 평균 신사구체(腎絲球體)의 면적은 담수(淡水)에 적응된 개체의 면적보다 유의성있게 나타났다. 해수(海水)에 적응(適應)된 틸라피아의 신단위(腎

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.50-59
• /
• 2020

Superabsorbent Polymer (SAP) expands inside concrete by absorbing water and contracts as it discharges water. Through this process, concrete can achieve the internal curing effect, but the space occupied by the expanded SAP remains as a void. In this study, the effects of SAP internal curing and voids were evaluated by evaluating the fundamental properties and chloride penetration resistance of SAP mixed concrete. Also, to evaluate the internal curing effect by SAP, the tests were carried out under water and sealed curing conditions, respectively. From the result, the compressive strength of water curing did not differ significantly according to the mixing ratio of SAP. In the case of sealed curing, however, the compressive strength tended to increase as the mixing ratio of SAP increased. The internal curing effect of sealed curing was considered to have influenced the increase in compressive strength. In the case of the chloride diffusion coefficient, the diffusion coefficient tended to decrease as the mixing ratio of SAP increased. In particular, as the sealed curing is applied, the chloride penetration resistance is further improved due to internal curing effect. If the curing conditions are different, it is considered inappropriate to estimate the chloride penetration resistance by the surface electrical resistivity.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.83-90
• /
• 2017

Concrete structure for nuclear power plant is mass concrete structure with large wall depth and easily permits cracking in early age due to hydration heat and drying shrinkage. It always needs cooling water so that usually located near to sea shore. The crack on concrete surface permits rapid chloride intrusion and also causes more rapid corrosion in the steel. In the study, the effect of age and crack width on chloride diffusion is evaluated for the concrete for nuclear power plant with 6000 psi strength. For the work, various crack widths with 0.0~1.4 mm are induced and accelerated diffusion test is performed for concrete with 56 days, 180days, and 365 days. With increasing crack width over 1.0mm, diffusion coefficient is enlarged to 2.7~3.1 times and significant reduction of diffusion is evaluated due to age effect. Furthermore, apparent diffusion coefficient and surface chloride content are evaluated for the concrete with various crack width exposed to atmospheric zone with salt spraying at the age of 180 days. The results are also analyzed with those from accelerated diffusion test.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.485-488
• /
• 2008

Recycled fine aggregate has low quality because it contains large amount of old mortar. So, its usage is limited to a lower value-add, such as the roadbed material etc. Also, alkaline water occurred from treatment process of the waste concrete is becoming the cause of environmental problem. Accordingly, this study is to develop on the high quality recycled fine aggregate produced by low speed wet abraser using sulphuric. We investigated the properties of compressive strength of the mortar which was manufactured using recycled fine aggregate containing calcined gypsum produced by earlier mentioned process. Test results indicate that mortar using recycled fine aggregate containing calcined gypsum has lowest compressive strength. It seems that low compressive strength is closely associated with the expansion of the specimen by excessive formation of ettringite.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.6
• /
• pp.617-625
• /
• 2009

This study is devoted to the problems of thermal and autogenous expansion stresses in order to avoid cracking using chemically prestressing method. The chemical prestress can be induced by autogenous expansion characteristics of MgO concrete made in specific burning temperature. The volume change induced cracking has great influence on the long-term durability and serviceability. To evaluate risk of cracking, the computer programs for analysis of thermal and autogenous expansion stresses were developed. In these 3-D finite element procedures, long-term autogenous expansive deformation is modeled and its resultant stress is calculated and then verified by comparison with manual calculation results. In this study, the stress development is related to thermal and autogenous expansive deformation. Using the developed program, residual stresses of MgO concrete were compared and analysed in the example From the numerical results it is found that long-term, and temperature dependent expansive concrete with light-burnt MgO is most effective in controlling the risk of cracking of mass concrete because it has high temperature for long period. The developed analysis program can be efficiently utilized as a useful tool to evaluate the thermal and autogenous expansion stresses in mass concrete structures with lightly burnt MgO.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.1
• /
• pp.25-31
• /
• 2018

In this study, the Controlled Low Strength Material (CLSM) was investigated to utilize the bottom ash and fly ash generated in the Circulating Fluidized Bed Combustor (CFBC). It was confirmed that the CFBC fly ash (CFBC-F) and CFBC bottom ash (CFBC-B) had an irregular particle shape through SEM measurement. According to the results of the hazard analysis, it was also confirmed that they were environmentally safe. In the case of mixing with CFBC-F, the unit quantity was increased. Regarding the rate of change of length, shrinkage in the range of -0.05~0.50% occurred in the air dry curing condition and expansion in the range of 0.1~0.6% in the sealed curing condition. Compressive strength was increased in the sealed curing condition compared to the air dry curing condition because there was enough moisture for hydration reaction in the long term. Therefore, the results of this study are likely be used as basic research data of mine filler materials.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.2
• /
• pp.190-197
• /
• 2020

This paper evaluates the mechanical properties and durability of cement matrix blended with mineral admixtures and ferronickel slag(FNS) powder which is an industrial b y-product during ferronickel smelting process. The hydration heat, pore structure, compressive strength, length change, rapid chloride penetration test(RCPT), and freezing and thawing resistance of ternary blended cement matrix were investigated and compared with ordinary portland cement matrix. The result showed that the compressive strength of ternary blended cement matrix using ferronickel slag powder and mineral mixture was low in strength compared to the reference concrete, but recovered to a certain extent by using alkali activator. Length change of cement mortar using FNS powder have shown less shrinkage occurs than the reference specimen. In addition, irrespective of using the alkali-activators, all ternary mix are indicative of the 'very low' range for chloride ion penetrability according to the ASTM C 1202, and the freeze-thaw resistance also showed excellent results.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.509-512
• /
• 2009

Powder diffraction patterns of the zeolite mesolite ($Na_{5.33}Ca_{5.33}Al_{16}Si_{24}O_{80}{\cdot}21.33H_2O$), with a natrolite framework topology were measured as a function of pressure up to 5.0 GPa using a diamond-anvil cell and a $200{\mu}m$-focused monochromatic synchrotron X-ray. Under the hydrostatic conditions mediated by pore-penetrating alcohol and water mixture, the elastic behavior of mesolite is characterized by continuous volume expansion between ca. 0.5 and 1.5 GPa, which results from expansion in the ab-plane and contraction along the c-axis. Subsequent to this anomalous behavior, changes in the powder diffraction patterns suggest possible reentrant order-disorder transition. The ordered layers of sodium- and calcium-containing channels in a 1:2 ratio along the b-axis attribute to the $3b_{natrolite}$ cell below 1.5 GPa. When the volume expansion is completed above 1.5 GPa, such characteristic ordering reflections disappear and the $b_{natrolite}$ cell persists with marginal volume contraction up to ca. 2.5 GPa. Further increase in pressure leads to progressive volume contraction and appears to generate another set of superlattice reflections in the $3c_{natrolite}$ cell. This suggests that mesolite in the pressure-induced hydration state experiences order-disorder-order transition involving the motions of sodium and calcium cations either through cross-channel diffusion or within the respective channels.