• Geophysics and Geophysical Exploration
• /
• v.26 no.1
• /
• pp.8-17
• /
• 2023

Various sources, such as wind, waves, ships, and gas leaks from the seafloor, forms bubbles in the ocean. Underwater bubbles cause signal scattering, considerably affecting acoustic measurements. This characteristic of bubbles is used to block underwater noise by attenuating the intensity of the propagated signal. Recently, researchers have been studying the large-scale release of methane gas as bubble plumes from the seabed. Understanding the physical properties and distribution of bubble plumes is crucial for studying the relation between leaked methane gas and climate change. Therefore, a water tank experiment was conducted to estimate the distribution of bubble plumes using seismic imaging techniques and acoustic signals obtained from artificially generated bubbles using a bubble generator. Reverse time migration was applied to image the bubble plumes while the acquired acoustic envelope signal was used to effectively estimate bubble distribution. Imaging results were compared with optical camera images to verify the estimated bubble distribution. The water tank experiment confirmed that the proposed system could successfully image the distribution of bubble plumes using reverse time migration and the envelope signal. The experiment showed that the scattering signal of artificial bubble plumes can be used for seismic imaging.

• Smart Media Journal
• /
• v.12 no.2
• /
• pp.27-35
• /
• 2023

Currently, online user authentication is perform using joint certificates issued by accredited certification authorities and simple certificates issued by private agency. In such a PKI(Public Key Infrastructure) system, various cryptographic technologies are used, and in particular, digital signatures are used as a core technology. The digital signature scheme is equally used in DID(Decentralized Identity), which is attracting attention to replace the existing centralized system. As such, the digital signature-based user authentication used in current online services is also applied in the metaverse, which is attracting attention as the next-generation online world. Metaverse, a compound word of "meta," which means virtual and transcendent, and "universe," means a virtual world that includes the existing online world. Due to various developments of the metaverse, it is expted that new authentication technologies including biometric authentication will be used, but existing authentication technologies are still being used. Therefore, in this study, we study digital signature scheme that can be efficiently used for user authentication in the developing metaverse. In particular, we experimentally analyze the effectiveness of ECDSA, which is currently used as a standard for digital signatures, and Schnorr signatures, which can quickly verify a large amount of signatures.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.4
• /
• pp.76-89
• /
• 2023

One of the technologies in urban agriculture, hydroponics cultivation, has primarily focused on technological development, resulting in a lack of research on urban agriculture's cultural utilization aspects, encompassing cultural values associated with urban residents' leisure activities. Therefore, this study aimed to identify the participation constraints perceived by school community members when implementing urban farming activities using hydroponics and understand the structural relationships between the variables that influence decision-making from the perspective of leisure activities in urban farming. As a result, participation constraints in urban farming activities utilizing hydroponics were first categorized into intrinsic, interpersonal, and structural factors. Second, the results of hypothesis model verification showed that interpersonal constraints significantly influenced the participants' willingness to participate and their expected behavior. This study found the multidimensional perceptions of school community members regarding hydroponic urban farming conducted in urban spaces, particularly rooftops, and revealed the influence of decision-making factors on participation when conducting urban farming activities using hydroponic cultivation.

• Journal of Korean Society of Forest Science
• /
• v.112 no.3
• /
• pp.363-373
• /
• 2023

Forest biomass surveys are regularly conducted to assess and manage forests as carbon sinks. LiDAR (Light Detection and Ranging), a remote sensing technology, has attracted considerable attention, as it allows for objective acquisition of forest structure information with minimal labor. In this study, we propose a method for estimating overstory and understory biomass in forest stands using backpack laser scanning (BPLS) and unmanned aerial vehicle laser scanning (UAV-LS), and assessed its accuracy. For overstory biomass, we analyzed the accuracy of BPLS and UAV-LS in estimating diameter at breast height (DBH) and tree height. For understory biomass, we developed a multiple regression model for estimating understory biomass using the best combination of vertical structure metrics extracted from the BPLS data. The results indicated that BPLS provided accurate estimations of DBH (R² =0.92), but underestimated tree height (R² =0.63, bias=-5.56 m), whereas UAV-LS showed strong performance in estimating tree height (R² =0.91). For understory biomass, metrics representing the mean height of the points and the point density of the fourth layer were selected to develop the model. The cross-validation result of the understory biomass estimation model showed a coefficient of determination of 0.68. The study findings suggest that the proposed overstory and understory biomass survey methods using BPLS and UAV-LS can effectively replace traditional biomass survey methods.

• Journal of the Korea Society for Simulation
• /
• v.32 no.3
• /
• pp.23-31
• /
• 2023

Software development involves a series of stages, including requirements analysis, design, implementation, unit testing, and integration testing, similar to those used in the system engineering process. This study utilized MathWorks' model-based design platform to develop multi-function radar software and evaluated its feasibility and efficiency. Because the development of conventional radar software is performed by a unit algorithm rather than in an integrated form, it requires additional efforts to manage the integrated software, such as requirement analysis and integrated testing. The mode-based platform applied in this paper provides an integrated development environment for requirements analysis and allocation, algorithm development through simulation, automatic code generation for deployment, and integrated requirements testing, and result management. With the platform, we developed multi-level models of the multi-function radar software, verified them using test harnesses, managed requirements, and transformed them into hardware deployable language using the auto code generation tool. We expect this Model-based integrated development to reduce errors from miscommunication or other human factors and save on the development schedule and cost.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.13-21
• /
• 2009

The sensor nodes that form a wireless sensor network must perform both routing and sensing roles, since each sensor node always has a regular energy drain. The majority of sensors being used in wireless sensor networks are either unmanned or operated in environments that make them difficult for humans to approach. Furthermore, since many wireless sensor networks contain large numbers of sensors, thus requiring the sensor nodes to be small in size and cheap in price, the amount of power that can be supplied to the nodes and their data processing capacity are both limited. In this paper, we proposes the WSN(Wireless Sensor Network) algorithm which is applied sensor node that has low power consumption and efficiency measurement. Moreover, the efficiency routing protocol is proposed in this paper. The proposed algorithm reduces power consumption of sensor node data communication. It has not researched in LEACH(Low-Energy Adaptive Clustering Hierarchy) routing protocol. As controlling the active/sleep mode based on the measured data by sensor node, the energy consumption is able to be managed. In the event, the data is transferred to the local cluster head already set. The other side, this algorithm send the data as dependent on the information such as initial and present energy, and the number of rounds that are transformed into cluster header and then transferred. In this situation, the assignment of each node to cluster head evenly is very important. We selected cluster head efficiently and uniformly distributed the energy to each cluster node through the proposed algorithm. Consequently, this caused the extension of the WSN life time.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.5
• /
• pp.667-674
• /
• 2023

In the event of a disaster occurring within a building, the prompt and efficient evacuation and rescue of occupants within the building becomes the foremost priority to minimize casualties. For the purpose of such rescue operations, it is essential to ascertain the distribution of individuals within the building. Nevertheless, there is a primary dependence on accounts provided by pertinent individuals like building proprietors or security staff, alongside fundamental data encompassing floor dimensions and maximum capacity. Consequently, accurate determination of the number of occupants within the building holds paramount significance in reducing uncertainties at the site and facilitating effective rescue activities during the golden hour. This research introduces a methodology employing computer vision algorithms to count the number of occupants within distinct building locations based on images captured by installed multiple CCTV cameras. The counting methodology consists of three stages: (1) establishing virtual Lines of Interest (LOI) for each camera to construct a multi-camera network environment, (2) detecting and tracking people within the monitoring area using deep learning, and (3) aggregating counts across the multi-camera network. The proposed methodology was validated through experiments conducted in a five-story building with the average accurary of 89.9% and the average MAE of 0.178 and RMSE of 0.339, and the advantages of using multiple cameras for occupant counting were explained. This paper showed the potential of the proposed methodology for more effective and timely disaster management through common surveillance systems by providing prompt occupancy information.

• Journal of Korean Society of Forest Science
• /
• v.112 no.2
• /
• pp.209-216
• /
• 2023

This study aimed to use national forest inventory data to develop a forest productivity index and yield prediction model of a Tilia amurensis stand. The site index displaying the forest productivity of the Tilia amurensis stand was developed as a Schumacher model, and the site index classification curve was generated from the model results; its distribution growth in Korea ranged from 8-16. The growth model using age as an independent variable for breast height and height diameter estimation was derived from the Chapman-Richards and Weibull model. The Fitness Indices of the estimation models were 0.32 and 0.11, respectively, which were generally low values, but the estimation-equation residuals were evenly distributed around 0, so we judged that there would be no issue in applying the equation. The stand basal area and site index of the Tilia amurensis stand had the greatest effect on the stand-volume change. These two factors were used to derive the Tilia amurensis stand yield model, and the model's determination coefficient was approximately 94%. After verifying the residual normality of the equation and autocorrelation of the growth factors in the yield model, no particular problems were observed. Finally, the growth and yield models of the Tilia amurensis stand were used to produce the makeshift stand yield table. According to this table, when the Tilia amurensis stand is 70 years old, the estimated stand-volume per hectare would be approximately 208 m³ . It is expected that these study results will be helpful for decision-making of Tilia amurensis stands management, which have high value as a forest resource for honey and timber.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.11
• /
• pp.89-99
• /
• 2006

The PCRW (Precast Concrete Retaining Wall) has many advantages compared with cast in place concrete retaining wall : shorter construction period, excellency of quality and minimum interference with the adjacent structure and traffics. However, shallow foundation type of PCRW, which has comparatively better ground condition, has some disadvantages such as difficulty in transportation and higher cost due to the size of PCRW being expanded by resisting only with self-weight if there is no other supplementary reinforcement. The presented study, in order to complement such disadvantages of PCRW, have applied the micropile method. The micropile method has advantages like low-cost and high-efficiency and does not require huge space, because it can be executed with small size equipment. However, the mechanical behavior characteristics of the PCRW reinforced by micropile, which is installed to improve the reinforcement effect, is not yet clearly identified and there is no suggested standard as to the length, diameter, install angle and install position of micropiles. Hence, this method is yet being designed depend on engineer's experience. In this study, various laboratory model tests as to sliding and overturning were performed in order to identify and present the optimum type of reinforcement and reinforcement effect of the PCRW reinforced by micropiles. In addition, it also executed numerical analysis for the purpose of verifying the optimum type of reinforcement for micropiles based on the results of laboratory model tests. The optimum reinforcement type of micropiles was estimated by model test and numerical analysis. The length of micropiles is 0.4 times wall height and the diameter is 0.04 times wall length.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.11
• /
• pp.27-38
• /
• 2009

In this study, a series of 1 g shaking table model pile tests were carried out in saturated dense and loose sand to evaluate dynamic p-y curves for various conditions of flexural stiffness of a pile shaft, acceleration frequency and acceleration amplitude for input loads. Dynamic p-y backbone curve which can be applied to pseudo static analysis for saturated dense sand was proposed as a hyperbolic function by connecting the peak points of the experimental p-y curves, which corresponded to maximum soil resistances. In order to represent the backbone curve numerically, empirical equations were developed for the initial stiffness ($k_{ini}$) and the ultimate capacity ($p_u$) of soils as a function of a friction angle and a confining stress. The applicability of a p-y backbone curve was evaluated based on the centrifuge test results of other researchers cited in literature, and this suggested backbone curve was also compared with the currently available p-y curves. And also, the scaling factor ($S_F$) to account for the degradation of soil resistance according to the excess pore pressure was developed from the results of saturated loose sand.