• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.4
• /
• pp.235-243
• /
• 2021

River surveying is conducted to acquire basic geographic data for river master plans and various river maintenance, and it is also used to predict changes after river maintenance construction. ABL (Airborne Bathymetric LiDAR) system is a cutting-edge surveying technology that can simultaneously observe the water surface and river bed using a green laser, and has many advantages in river surveying. In order to use the ABL data for river surveying, it is prerequisite step to segment and extract the water surface and river bed points from the original point cloud data. In this study, point cloud segmentation was performed by applying the ground filtering technique, ATIN (Adaptive Triangular Irregular Network) to the ABL data and then, the water surface and riverbed point clouds were extracted sequentially. In the Gokgyocheon river area, Chungcheongnam-do, the experiment was conducted with the dataset obtained using the Leica Chiroptera 4X sensor. As a result of the study, the overall classification accuracy for the water surface and riverbed was 88.8%, and the Kappa coefficient was 0.825, confirming that the ABL data can be effectively used for river surveying.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.591-598
• /
• 2021

The digital phase-locked loops(DPLL) is a circuit used for phase synchronization and has been generally used in various fields such as communication and circuit fields. State estimators are used to design digital phase-locked loops, and infinite impulse response state estimators such as the well-known Kalman filter have been used. In general, the performance of the infinite impulse response state estimator-based digital phase-locked loop is excellent, but a sudden performance degradation may occur in unexpected situations such as inaccuracy of initial value, model error, and disturbance. In this paper, we propose a minimum variance finite impulse response filter with optimal horizon for designing a new digital phase-locked loop. A numerical method is introduced to obtain the measured value interval length, which is an important parameter of the proposed finite impulse response filter, and to obtain a gain, the covariance matrix of the error is set as a cost function, and a linear matrix inequality is used to minimize it. In order to verify the superiority and robustness of the proposed digital phase-locked loop, a simulation was performed for comparison and analysis with the existing method in a situation where noise information was inaccurate.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.9
• /
• pp.1-16
• /
• 2019

This study was carried out to develop a physics education program for foreign students of university in Korea to improve their ability to major in the field and to prevent them from becoming dropout. The subjects of the study are five Chinese students attending a natural science and engineering college. Prior to the development of the physics education program, the researchers developed basic physics textbooks for the foreign students and questionaries for diagnosis and summative evaluation, and utilized them to apply a total of seven classes. After the application of the classes, the results of the student's diagnosis and summative evaluation, the teacher's diaries, the observer's diaries, and the transcripts were analyzed by triangulation method. In addition, Nvivo12 was used for the analysis of the teacher's and observer's diaries to help with qualitative analysis. The results of the study are as follows: First, the oder and contents of physics education program for students of the natural science and engineering college were presented in detail, and basic physics textbooks and tools for diagnosis and summative assessment were developed. Second, as a result of the analysis of the diagnosis and summative assessment results of the program, the students' basic physics achievement improved by an average of 40 points due to the application of the developed program. Third, as a result of the application of the program using Nvivo12, meaningful node and actual cases were extracted. There were 10 types of nodes created such as understanding of the students, teaching method, rate of the participation, level differences, language problems, relevance to majors, curriculum and methods of education in the country of origin, cooperative learning, and interest inducement. The researcher provided suggestions on physics education methods for students of science and engineering colleges in Korea based on the related cases.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.4
• /
• pp.83-91
• /
• 2021

In this study, to improve the connection performance between the existing reinforced concrete (R/C) frame and the strengthening member, we proposed a new H-section steel frame with elastic pad (HSFEP) system for seismic rehabilitation of existing medium-to-low-rise reinforced concrete (R/C) buildings. This HSFEP strengthening system exhibits an excellent connection performance because an elastic pad is installed between the existing structure and reinforcing frame. The method shows a strength design approach implemented via retrofitting, to easily increase the ultimate lateral load capacity of R/C buildings lacking seismic data, which exhibit shear failure mechanism. Two full-size two-story R/C frame specimens were designed based on an existing R/C building in Korea lacking seismic data, and then strengthened using the HSFEP system; thus, one control specimen and one specimen strengthened with the HSFEP system were used. Pseudodynamic tests were conducted to verify the effects of seismic retrofitting, and the earthquake response behavior with use of the proposed method, in terms of the maximum response strength, response displacement, and degree of earthquake damage compared with the control R/C frame. Test results revealed that the proposed HSFEP strengthening method, internally applied to the R/C frame, effectively increased the lateral ultimate strength, resulting in reduced response displacement of R/C structures under large scale earthquake conditions.

• Anatomy & Biological Anthropology
• /
• v.31 no.4
• /
• pp.105-119
• /
• 2018

Archaeogenetics is an academic discipline that aims to establish scientific facts of human history by integrating ancient DNA analyses with archaeological and anthropological evidence. After ancient DNA research was initiated about 30 years ago, it has been innovated so rapidly that the range of analysis has been extended toward the whole genome sequence of ancient genomes in recent 10 years. By this development, researchers have been able to study in detail the origins and migration patterns of hominin species and ancient human populations by approaches of evolutionary genetics. This study has reviewed main principles of the archaeogenetic analysis and the current trends of ancient genome studies with recent achievements. While sampling techniques and statistical analyses have been improved, typical research methods have been established by the findings on hominins and ancient western Eurasia populations. Recently, archaeogenecists have been applying the methods to studying those in other geographical areas. Nonetheless, there is still the lack of ancient genome research about populations in Eastern Asia including the Korean peninsula. This review ultimately aims to predict possibilities and promise of future ancient genome studies of ancient Korean populations.

• Journal of vocational education research
• /
• v.33 no.3
• /
• pp.145-167
• /
• 2014

The purpose of this research is to prepare the measures for evaluating the job of horse-riding instructor and improvement related to it and for distributing horse-riding industry effectively. Forsuch, we tried to analyze job of horse-riding instructor. Inparticular, we have developed DACUM chart of horse-riding instructor through DACUM method and experts related to it. As result, we found out eight duties and hundreds of job and arranged seven duty areas in total and eighty-two executed works. In addition, as experts said, the horse-riding instructor is the one who 'instructs people learning horse-riding in horse-riding facility and manages horses, horse-riding equipment and man-power.' Such results provide the procedure of horse-riding instructor cultivation which has been presently underway with many viewpoints. Especially, there are three educational processes and subject materials related to horse-riding instructor's examination(Hipologia, Horse-treatment technique, Horse Health management). However, as result of analysis on duty, we found out that racecourse management and horse-riding education theory has been needed to be added and complemented as well. In addition, the work and duty of analysis can be used to be made use up of as work profile and specification and such data can be also made use of as standard of training and submission. Through this study there should be a necessary work to distinguish between re-drafting and role of duty in its own right related to certification of horse-riding instructor in future and it would be necessary to develop study that is able to connect them all to certificate. What is more, there should be work and measure required for rethinking of utility of certification.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.4
• /
• pp.29-40
• /
• 2018

Oil sands, which are largely distributed in Canada and Venezuela, are a mixture of crude oil and sandy soils. In order to extract crude oil from oil sands, construction of massive oil sand plants is required. Generally, the typically-used foundation types of the oil sand plant are driven piles and cast-in-place piles. Most of the oil sand plants are located in cold and remote regions. Installation of driven piles in frozen or organic surface soils is difficult due to high resistance and installation equipment accessability, while the cast-in-place pile has concrete curing problem due to cold temperature. Helical pile can be installed quickly and easily using rotation with a little help of vertical load. As the installation of helical pile is available using a small and light-weight installation equipment, accessibility of installation equipment is improved. The helical pile has an advantage of easy removal by rotation in reverse direction compared with that of installation. Furthermore, reuse of removed helical piles is possible when the piles are structurally safe. In this study, the behavior of helical piles varying helix pitch was analyzed based on the numerical analysis results. Numerical model was calibrated based on the results of model helical pile tests in laboratory. The ultimate helical pile loads, the displacement of each helix attached to the shaft of the helical pile, and the load sharing ratio of each helix were analyzed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.18-23
• /
• 2018

FPSO consists of topside modularized plants for production of crude oil, and hullside structures that serve as support for the topside and storage of produced crude oil. The structural behavior of the FPSO topside module and its supporting hull depends on the interface structure that connects them, and the interface structure consists of a combination of individual unit support structures called Module Support Seat (MSS). Types of interface structures are various and, accordingly, the basic design of the FPSO topside module structure is greatly influenced, so various design methods should be considered from the initial design phase. Structural design of FPSO topside module requires consideration of the number of MSSs, connection type, and structural analysis options such as the range of finite element models, load conditions, and boundary conditions for verification of structural strength. In this study, the comparison combination cases for the above considerations were derived and the strength evaluation was performed, and the structural behavior characteristics of the topside module were compared and analyzed through a detailed review of the analysis results. The results of this study are considered to be a good reference for designing a more reliable topside module structure.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.433-440
• /
• 2019

Offshore working environments such as ships, offshore oil and gas plants, and offshore wind turbines are isolated and directly exposed to rough seas, which pose high risks of safety accidents. Therefore, all workers in offshore plants should be able to cope with emergency situations and must be qualified according to relevant laws and regulations such as the International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW Convention) and Offshore Petroleum Industry Training Organization (OPITO) standards. In particular, marine workers should be able to perform cardiopulmonary resuscitation (CPR) in isolated locations or enclosed and confined spaces such as those in life-boats, life-rafts, rescue-boats, etc. Because the floor material is made of rubber, it may be difficult to perform chest compressions in life-rafts used to escape from emergency situations in ships or offshore plants. Chest compressions performed on life-rafts may reduce the accuracy of CPR and increase fatigue for those providing aid. To measure the accuracy and fatigue of those performing CPR in life-rafts, 15 experimenters with more than five years of experience as first aid instructors were exposed to different CPR environments in a marine safety training center equipped with an artificial wave generator. The results showed that the accuracy of CPR in the classroom was 99.6 %, but that in various life-raft environments was only 84 %. T-verification of the two sites confirmed the reduced accuracy of CPR performed on life-rafts. CPR on life-rafts should be performed in groups of two and with the use of automated chest compression devices.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.272-277
• /
• 2019

In this paper, a manufacturing method of an anti-glare cover glass on LCD for outdoor use is proposed. The main specification of cover glass is hardness and anti-glare. Hardness is achieved by using the tempered glass, and anti-glare(AG) film is laminated to meet anti-glare specification no the tempered glass. However, the AG film is difficult to maintain the AG performance continuously because the abrasion resistance of the PET film itself is as weak as about 3H. Therefore, a novel production procedure using screen printing method is proposed. The proposed coating is implemented by applying $ZnO-B_2O_3-SiO_2$ powder on glass surface and the glass is made with enhanced hardness through tempering process. In order to apply the ZBS powder uniformly on the glass surface, a screen printing process is used. The main parameters to be considered in screen printing are the oil concentration and mesh opening size. Because the amount of ZBS powder applied to the printing process is controlled by these two parameters, the correlativity is confirmed through the experiments. In order to evaluate the performance of the proposed method, the haze, surface roughness and transmittance are selected as the performance index and are compared with the AG film. As a result of comparison, it is verified that the transmittance of the proposed tempered glass is 83.1%, which is slightly lower than 89.5% of AG film, but the hardness is more than double to 7H.