• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.19-31
• /
• 2022

The definition of urban forest is described as all forest and trees except the Natural Parks throughout whole territory in Urban Forest Act. But the concept of urban forest in the law differs from general awareness by Korean citizen and from definitions of other countries. For discussing such differences of urban forest definition, it was tested how much urban forest area would be changed according to the various definition of urban area. The urban area was defined to be four scenarios in this study in consideration of "urban area" by National Land Planning and Utilization Act (NLPUA), 300m buffered boundary from the "urban area" proposed by World Health Organization (WHO) and forest watershed area. In the scenario 1, including forest watershed intersected with "urban area" by NLPUA, urban forest area was estimated at 1.83 million ha in which urban forest area per person was 386㎡. In the scenario 2, including forest watershed intersected with 300m buffered boundary from the "urban area" by NLPUA, urban forest area was estimated at 1.92 million ha in which urban forest area per person was 405㎡. In the scenario 3, including forest watershed intersected with "urban area" placed within administration boundary (Eup·Dong districts), urban forest area was estimated at 1.08 million ha in which urban forest area per person was 230㎡. In the scenario 4, including forest watershed intersected with 300m buffered boundary from "urban area" placed within administration boundary, urban forest area was estimated at 1.20 million ha in which urban forest area per person was 256㎡. Therefore, the boundary of urban area should be agreed clearly prior to defining the urban forest area for avoiding unclear area calculated according to different definitions.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.3
• /
• pp.223-229
• /
• 2022

This study was conducted to investigate the effect of packaging methods and sterilization treatment on storability and microbial control in paprika fruits. When treated with chlorine dioxide gas for 3, 6, and 12 hours and cold plasma gas for 1, 3, and 6 hours, and then packed in a carton box and stored in a 8 ± 1℃ chamber for 7 days, chlorine dioxide treated 12 hours and plasma treated 6 hours was prevented the development of E·coli and YM(yeast and mold). Accordingly, the control was treated with chlorine dioxide for 12 hours and plasma for 6 hours, packed using a carton box and 40,000 cc·m^-2·day^-1·atm^-1 OTR film (MAP), and stored in a 8 ± 1℃ chamber for 20 days. Fresh weight loss rate during storage was less than 1% in the MAP treatments, and the visual quality of the MAP treatments was above the marketability limit until the end of storage. There was no difference in the contents of oxygen, carbon dioxide, and ethylene in the film. In the case of firmness, the chlorine dioxide treatments was low, and the Hunter a^* value, which showed chromaticity, was highest in the Plasma 6h MAP treatment. Off-odor was investigated in the MAP treatments, but it was very low. The rate of mold growth on the fruit stalk of paprika was the fastest and highest in the chlorine dioxide treated box packaging treatments, and the lowest in the chlorine dioxide treated MAP treatments at the end of storage. The aerobic count in the pulp on the storage end date was the lowest in the plasma treated box packaging treatments, the lowest number of E·coli in the chlorine dioxide treated MAP treatments, and the lowest yeast & mold in the chlorine dioxide treated box packaging treatments. As a result, for the inhibition of microorganisms during paprika storage, it is considered appropriate to treat plasma for 6 hours before storage regardless of the packaging method.

• Journal of Korean Elementary Science Education
• /
• v.41 no.4
• /
• pp.740-753
• /
• 2022

This study was conducted to develop and apply an out-of-school STEAM program model based on Social-Emotional Learning (SEL) for underprivileged students in the lower grades. To this end, a STEAM program based on SEL was developed, with the following characteristics. First, by integrating traditional STEAM learning elements and SEL elements, a structured program was designed with consistent stages, including mindfulness meditation→present an authentic situation→creative design→emotional experiences→reflection. Second, the program was structured so that elementary school students could develop mathematical thinking and scientific inquiry skills in problem-solving situations in daily life. Third, the detailed themes for each STEAM program involved storytelling-based problem situations, as well as activities centered on play and sympathy to reflect the educational needs of underprivileged students. From these characteristics, a total of five programs were developed and applied to 16 teachers and 354 lower-grade elementary school students in 16 community children centers nationwide. The results were as follows. First, while students' satisfaction with the STEAM program was 4.16, there were no significant differences in STEAM satisfaction according to gender. Second, while all students' interest and self-efficacy, which was one of sub factors of STEAM attitude, were significantly improved, no significant difference was seen in STEAM attitudes according to gender. Third, although students' SEL competencies were not significantly improved, relationship skills, which were among the sub factors of SEL competencies, were significantly improved, and there were no significant differences in SEL competencies according to gender. From these results, a discussion on the effect of the out-of-school STEAM program for underprivileged students and directions for follow-up studies was suggested.

• Journal of Korean Elementary Science Education
• /
• v.41 no.4
• /
• pp.701-724
• /
• 2022

In this study, the Nature of Science (NOS) instrument for elementary school students in the form of open questionnaires was developed specifically to reveal elementary school students' perceptions of the NOS, and its validity and effectiveness were investigated. To develop a NOS instrument for elementary school students, problems that may occur when applying the existing NOS instruments to elementary school students were analyzed and based on this, the development direction of the NOS instrument was established. In addition, after selecting seven NOS types suitable for the level of elementary school students, the preliminary instrument was produced by modifying and supplementing the items in the existing instruments for each type or by developing new items. Finally, the NOS instrument consisting of eight questions was developed by adding one question asking for a comprehensive understanding of science to seven questions related to each type of NOS after a content validity test of the science education expert group. To verify the practical effect of the developed instrument, pre- and post-tests were conducted on 50 students in two classes of sixth grade at two elementary schools in Seoul: 'existing instrument → development instrument' in one class, and 'development instrument → existing instrument' in the other class. The collected data were then compared and evaluated through summary content analysis and analyzed by executing the Wilcoxon signed-rank test. As a result of comparing and analyzing students' responses to the existing NOS instrument and the developed NOS instrument, students' perspectives on the NOS were more diverse when using the developed instrument, and the level of error in the response caused by misinterpreting the intention of the question was reduced. In addition, when using the developed instrument, the responses of the majority of students at a statistically significant level changed more specifically. In this study, the implications for the development of NOS instruments suitable for elementary school students were discussed based on these results.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.4
• /
• pp.379-391
• /
• 2022

The current study aimed to compare the pH, solubility value, and ion release capability of premixed mineral trioxide aggregates (MTAs) versus conventional pulp capping materials before and after setting. The following materials were used: resin-modified calcium silicate cement (TheraCal LC^®, TLC), resin-modified calcium hydroxide cement (Ultra-Blend^TM plus, UBP), and 2 kinds of premixed MTA (Endocem MTA^® premixed regular [EMPR] and Well-Root^TM PT [WRP]). The specimens of each material were prepared before and after setting and were immersed in distilled water. The materials' pH and solubility value were assessed. Next, three kinds of ion (calcium, sulfide, and strontium) released by pulp capping materials were evaluated via inductively coupled plasma atomic emission spectrometry. In the after-setting group, the pH of TLC and UBP decreased. However, the pH of the premixed MTAs increased with time. TLC released a higher concentration of strontium ion compared with the other materials. Meanwhile, EMPR released a significantly high concentration of sulfide ion (p < 0.05). In the after-setting group, the 2 kinds of premixed MTAs released a significantly higher concentration of calcium ion compared with the other materials (p < 0.05). In the after-setting group, EMPR had a significantly low solubility value (p < 0.05). The Kruskal-Wallis test, followed by the Mann-Whitney U test with Bonferroni correction, was used in statistical analysis. In conclusion, resin-modified calcium silicate cement, modified calcium hydroxide cement, and the 2 kinds of premixed MTAs had an alkaline pH and low solubility value and they released various concentrations of ions after setting.

• Korean Journal of Poultry Science
• /
• v.49 no.4
• /
• pp.255-264
• /
• 2022

This study was performed to investigate the effects of dietary supplementation with ginseng by-products on growth, organ development, blood biochemical profiles, immune response, and stress parameter of broilers reared in high ambient temperatures. One hundred one-day-old male chicks (Ross 308) were used. At week two, the birds were randomly allocated into five dietary groups; control (CON), 0.5% ginseng berry (GB1), 1.0% ginseng berry (GB2), 0.5% ginseng leaves and stems (GLS1), and 1.0% ginseng leaves and stems (GLS2). The temperature was maintained at 32±1℃from 9 AM to 5 PM. Growth, serum immunoglobulins and corticosterone levels were monitored and analyzed. No significant differences among groups were observed in growth. However, during the finisher period (21~35d) and overall period (7~35 d), body weight gain in all supplemented groups tended higher than CON group. Blood biochemical profiles did not significantly differ among treatment groups except in bilirubin level. Serum immunoglobulins and corticosterone level showed no significant differences among groups. IgM and IgG levels were numerically higher in GLS1 than in other groups, but the difference was not significant. Corticosterone level also tended lower in all supplemented groups than in CON group, and larger decreases were observed in groups with higher ginseng by-product concentration. In conclusion, dietary supplementation of ginseng by-products shows potential to reduce heat stress in growing broilers with no negative effect on productivity.

• Clean Technology
• /
• v.28 no.4
• /
• pp.269-277
• /
• 2022

With the recent development of the biological enzymatic reaction industry, lactic acid (LA) can be mass-produced from biomass sources. In particular, a catalytic process that converts LA into acrylic acid (AA) is receiving much attention because AA is used widely in the petrochemical industry as a monomer for superabsorbent polymers (SAP) and as an adhesive for displays. In the LA conversion process, NaY zeolites have been previously shown to be a high-activity catalyst, which improves AA selectivity and long-term stability. However, NaY zeolites suffer from fast deactivation due to severe coking. Therefore, the aim of this study is to modify the acid-base properties of the NaY zeolite to address this shortcoming. First, base promoters, Ca ions, were introduced to the NaY zeolites to tune their acidity and basicity via ion exchange (IE) and incipient wetness impregnation (IWI). The IWI method showed superior catalyst selectivity and stability compared to the IE method, maintaining a high AA yield of approximately 40% during the 16 h reaction. Based on the NH₃- and CO₂-TPD results, the calcium salts that impregnated into the NaY zeolites were proposed to exit as an oxide form mainly at the exterior surface of NaY and act as additional base sites to promote the dehydration of LA to AA. The NaY zeolites were further treated with KOH before calcium impregnation to reduce the total acidity and improve the dispersion of calcium through the mesopores formed by KOH-induced desilication. However, this KOH treatment did not lead to enhanced AA selectivity. Finally, calcium loading was increased from 1wt% to 5wt% to maximize the amount of base sites. The increased basicity improved the AA selectivity substantially to 65% at 100% conversion while maintaining high activity during a 24 h reaction. Our results suggest that controlling the basicity of the catalyst is key to obtaining high AA selectivity and high catalyst stability.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.94-106
• /
• 2022

In order to increase timber self-sufficiency, Korea's 6th Basic Forest Plan aims to increase the density of forest roads to 12.8 m ha^-1 by 2037. However, due to rapid re-forestation, current management infrastructure is insufficient, with just 4.8 m ha^-1 of forest roads in 2017. This is partly due to time and cost limitations on the process of forest road feasibility evaluation, which considers factors such as topography and forest conditions. To solve this problem, we propose an eco-friendly and efficient forest road network planning method using a geographic information system (GIS), which can evaluate a potential road site remotely based on spatial information. To facilitate such planning, this study identifies forest road construction priorities that can be evaluated using spatial information, such as topography, forest type and forest disasters. A method of predicting the optimal route to connect a forest road with existing roads is also derived. Overlapping analysis was performed using GIS-MCE (which combines GIS with multi-criteria evaluation), targeting the areas of Cheongsong-gun and Buk-gu, Pohang-si, which have a low forest-road density. Each factor affecting the suitability of a proposed new forest road site was assigned a cost, creating a cost surface that facilitates prioritization for each forest type. The forest path's optimal route was then derived using least-cost path analysis. The results of this process were 30 forestry site recommendations in Cheongsong-gun and one in Buk-gu, Pohang-si; this would increase forest road density for the managed forest sites in Cheongsong-gun from 1.58 m ha^-1 to 2.55 m ha^-1. This evaluation method can contribute to the policy of increasing timber self-sufficiency by providing clear guidelines for selecting forest road construction sites and predicting optimal connections to the existing road network.

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.567-582
• /
• 2022

Chainsaw use for motor-manual timber harvesting in South Korea is associated with worker safety issues. However, forestry operations such as timber harvesting have already been mechanized to reduce hazards to workers and increase productivity. This study analyzed the productivities and costs of felling and processing, felling and processing using an excavator-based stroke harvester for Pinus rigida and Quercus mongolica stands. To efficiently operate the stroke harvester, we developed a regression equation to estimate the productivities of felling and processing, felling, and processing operations,and we conducted sensitivity analysis of the operation costs using DBH and machine utilization. The felling and processing productivity was 6.53 and 4.02 m³/SMH for P. rigida a nd Q. mongolica, respectively, and the cost was 17,983 and 29,210 won/m³, respectively. The felling productivity for P. rigida a nd Q. mongolica wa s 40.9 and 23.0 m³/SMH, respectively, and the cost was 2,667 and 4,743 won/m³, respectively. The processing productivity for P. rigida and Q. mongolica was 8.25 and 7.75 m³/SMH, respectively, and the cost was 15,296 and 16,283 won/m³, respectively. In the developed regression equation, the DBH, traveling distance, and number of cuttings were found to be important factors (p<0.05). Therefore, it is necessary to construct a DB considering the various conditions and species associated with harvester operations, and further research is needed to increase the accuracy of predicting operation productivity and costs.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.3
• /
• pp.175-182
• /
• 2022

Heavy metals can be intentionally or unintentionally introduced into plastic food utensils, containers, and packaging (PFUCP) as additives or contaminants, which can be ingested with food by humans. Here, seven-heavy metals (lead, cadmium, nickel, chromium, antimony, copper, and manganese) with toxicity concerns were selected, and risk assessment was done by establishing their migration from 137 PFUCP products made of 16 materials distributed in Korea. Migration of heavy metals was examined by applying 4% acetic acid as a food simulant (70℃, 30 minutes) to the PFUCP products. Inductively coupled plasma mass spectrometry (ICP-MS) was employed for the analysis of migrated heavy metals, and the reliability of quantitative results was confirmed by checking linearity, LOD, LOQ, recovery, precision, and expanded uncertainty. As a result of monitoring, heavy metals were detected at a level of non-detection to 8.76 ± 11.87 ㎍/L and most of the heavy metals investigated were only detected at trace amounts of less than 1 ㎍/L on average. However, antimony migrated from PET products was significantly higher than other groups. Risk assessment revealed that all the heavy metals investigated were safe with a margin of exposure above 311. Collectively, we demonstrated that heavy metals migrated from PFUCP products distributed in Korea appear to be within the safe range.