• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.1
• /
• pp.264-273
• /
• 2001

The conjugate heat transfer from a protruding module in a horizontal channel with a variation of air temperature is experimentally investigated. It is an aim of this study is to estimate temperature difference between a module and air. This study is performed with a variation of parameters that are air temperatures($T_i,=25^{\circ}C{\sim}55^{\circ}C),$ thermal resistance($R_c=158 K/W),$ air velocities ( 4V_i=0.1$ m/s~l.5 m/s ), and input power (Q=3 W, 7 W ). The results show that as the thermal resistance increases, the effect of air temperatures are decreased. And input power was most effective parameter on the temperature difference between a module and air.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.2
• /
• pp.195-206
• /
• 2002

The conjugate heat transfer from the simulated module in a horizontal channel with the variation of inlet air temperature is experimentally investigated. The aim of this study is to estimate temperature difference between a module and inlet air. This study is performed with the variation of parameters that are inlet air temperature(Ti=25~$55^{\circ}C), thermal resistance( $R_c$=0.05, 4.11, 158 K/W), inlet air velocity(Vi=0.1~1.5m/s), and input power(Q=3, 7 W). The results show that the effect of inlet air temperature is little, at the case of using conductive board. And input power was most effective parameter on the temperature difference between module and Inlet air.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.17-19
• /
• 2004

트렌치 게이트 구조를 통해 순방향 전압 강하 손실 없이 기생 사이리스터 래치-업을 억제시키는 새로운 수평형 절연 게이트 바이폴라 트랜지스터 (LIGBT)를 제안하였다. 제안된 소자의 베이스 션트 저항은 정공의 우회로 인하여 감소하였으며, 이에 따라 기생 사이리스터 래치-업이 억제되었다. 제안된 소자의 순방향 전압강하는 트렌치 구조에 의한 유효 채널 폭 증가로 감소하였다. 제안된 소자의 동작 원리 분석을 위해 ISE-TCAD를 이용한 3차원 시뮬레이션을 수행하였으며, 표준 CMOS 공정을 이용하여 소자를 제작 및 측정하였다. 제안된 소자의 순방향 전압 강하는 기존의 LIGBT에 비해 증가하지 않았으며, 래치-업 용량은 2배로 향상되었다. 제안된 소자의 포화 전류는 감소하였으며, 이로 인하여 소자의 강인성 (ruggedness)이 향상되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.132-139
• /
• 2016

This study was carried out near the waters of Jango port, Dangjin-gun, Chungcheongnam-do by utilizing 10kHz carrier frequency, for the purpose of measurement and analysis of underwater channel environment of the Western sea. For the measurement of horizontal channel environment, the separation distance between transmitter and receiver is made differently in the range between 10m and 4000m. Meanwhile, for the measurement of vertical channel environment, transmission and receiving side ships are fixed as contacted each other and measured differently depending on their depth of submergence. In this study, the Coherence Bandwidth and the Coherence Time were estimated by analyzing the Power delay profile of the real sea based on the measured data, and analyzing the doppler frequency through frequency conversion of received tone-signal, respectively. This study is expected to become a base study in carrying out the frame design for underwater communication to improve the communication and secure the reliability of communication in future underwater channel environment.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.619-630
• /
• 2013

In this paper, we propose an edge directed color demosaicing algorithm considering color channel correlation. The proposed method consists of local region classification step and edge directional interpolation step. In the first step, each region of a given Bayer image is classified as normal edge, pattern edge, and flat regions by using intra channel and inter channel gradients. Especially, two criteria and verification process for the normal edge and pattern edge classification are used to reduce edge direction estimation error, respectively. In the second step, edge directional interpolation process is performed according to characteristics of the classified regions. For horizontal and vertical directional interpolations, missing color components are obtained from interpolation equations based on intra channel and inter channel correlations in order to improve the performance of the directional interpolations. The simulation results show that the proposed algorithm outperforms conventional approaches in both objective and subjective terms.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.11 s.254
• /
• pp.1035-1042
• /
• 2006

An experimental investigation was performed to study two-phase pressure drop of deionized water in a microchannel. Measurement and evaluation of two-phase frictional pressure gradient were carried out using a single horizontal rectangular microchanne1 having a hydraulic diameter of $100{\mu}m$. Tests were performed for mass fluxes of 90, 169, and 267 $kg/m^2$s and heat fluxes of 200-700 $kW/m^2$. Test results showed that the measured two-phase frictional pressure gradient increased with the mass flux and vapor quality. Most macro-channel correlations of two-phase frictional pressure gradient did not provide reliable predictions except under certain limited conditions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.11 s.254
• /
• pp.1043-1050
• /
• 2006

An experimental investigation was performed to study flow boiling heat transfer of deionized water in a microchannel. Measurement and evaluation of boiling heat transfer coefficients were carried out using a single horizontal rectangular microchannel having a hydraulic diameter of $100{\mu}m$. Tests were performed for mass fluxes of 90, 169 and 267 $kg/m^2$s and heat fluxes of 200-700 $kW/m^2$. Test results showed that the measured boiling heat transfer coefficients had no dependence on mass flux and vapor quality. Most macro-channel correlations of boiling heat transfer coefficient did not provide reliable predictions.

• The Journal of the Korea Contents Association
• /
• v.6 no.6
• /
• pp.50-55
• /
• 2006

This paper presents a scheme which scrambles and descrambles images from multiple video channels. A combined image frame is formed by concatenating the incoming frames from channels in a two dimensional array. This algorithm employs an encryption scheme on row and column numbers of the combined image frame and thereby yields an encrypted combined image. The proposed algorithm is to encrypt multiple images at a time since it recomposes images from multiple video channels yielding one by composite image, and encrypts the composite image resulting In higher security.

• Journal of Broadcast Engineering
• /
• v.17 no.5
• /
• pp.827-837
• /
• 2012

As broadcasting environments change rapidly to digital, user requirements for next-generation broadcasting service which surpass current HDTV service become bigger and bigger. The next-generation broadcasting service progress from 2D to 3D, from HD to UHD and from 5.1ch audio to more than 10ch audio for high quality realistic broadcasting service. In this paper, we propose 10.2ch based multichannel audio reproduction system for UHDTV. The 10.2ch-based audio reproduction system add two side loudspeakers to enhance the surround sound localization effect and add two height and one ceiling loudspeakers to enhance the elevation localization effect. To evaluate the proposed system, we used APM(Auditory Process Model) for objective localization test and conducted subjective localization test. As a result of objective/subjective localization test, the proposed system shows the statistically same performance compare with 22.2ch audio system and shows the significantly better performance compared with 5.1ch audio system.

• Proceedings of the CALSEC Conference
• /
• 2002.01a
• /
• pp.269-271
• /
• 2002

M2M M2M의 정의 서로 다른 Marketplace의 시스템을 상호 접속할 수 있는 시점 M2M의 장점 M2M은 자사 e마켓에서 지원되지 않는 서비스나 정보를 다른 e마켓을 통해 제공할 수 있어 신규 고객확보는 물론 새로운 서비스나 신규 콘텐츠 생산에 대한 부담을 덜 수 있음 정보공유를 통한 수평적 Marketplace의 활성화 각종 문서/양식/트랜잭션들의 생성/교환/처리 비용 절감 마케팅 및 영업 채널의 확대에 따른 이윤의 증대(중략)