• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.2
• /
• pp.211-221
• /
• 2012

To utilize omni-directional images acquired by a rotating line camera for indoor spatial information services, we should register precisely the images with respect to an indoor coordinate system. In this study, we thus develop a georeferencing method to estimate the exterior orientation parameters of an omni-directional image - the position and attitude of the camera at the acquisition time. First, we derive the collinearity equations for the omni-directional image by geometrically modeling the rotating line camera. We then estimate the exterior orientation parameters using the collinearity equations with indoor control points. The experimental results from the application to real data indicate that the exterior orientation parameters is estimated with the precision of 1.4 mm and $0.05^{\circ}$ for the position and attitude, respectively. The residuals are within 3 and 10 pixels in horizontal and vertical directions, respectively. Particularly, the residuals in the vertical direction retain systematic errors mainly due to the lens distortion, which should be eliminated through a camera calibration process. Using omni-directional images georeferenced precisely with the proposed method, we can generate high resolution indoor 3D models and sophisticated augmented reality services based on the models.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.150-159
• /
• 1998

This paper described the recognition of the Off-line handwritten Hangul based on neural network using a feature extraction method. Features of Hangul can be extracted by a $5{\times}5$ window method which is the modified $3{\times}3$ mask method. These features are coded to binary patterns in order to use neural network's inputs efficiently. Hangul character is recognized by the consonant, the vertical vowel, and the horizontal vowel, separately. In order to verify the recognition rate, three different coding methods were used for neural networks. Three methods were the fixed-code method, the learned-code I method, and the learned-code II method. The result was shown that the learned-code II method was the best among three methods. The result of the learned-code II method was shown 100% recognition rate for the vertical vowel, 100% for the horizontal vowel, and 98.33% for the learned consonants and 93.75% for the new consonants.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.12
• /
• pp.67-75
• /
• 1999

In this paper, we present an ASIC(Application Specific Integrated Circuit) design of wavelet transform filter Wavelet transform is used in lots of application fields which include image compression, because it has an excellent energy compaction. The operation characteristic and performance of wavelet transform filter are analyzed by using verilog-HDL(Hardware Description Language). In this paper, the designed wavelet transform filter uses line memory to improve data processing rate. Generally, when it reads and writes data of DRAM by using Fast Page Mode, input and output processing is very fast in horizontal direction but substantially slow in vertical direction. The use of line memory solves this low speed processing problem. As a result, though the size of the chip is getting larger, processing time for an image frame becomes 4.66ms. Generally, since the limit of 1 frame processing time on the data of TV video is 33ms, so it is appropriate for TV video.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.337-343
• /
• 2007

Since three-dimensional (3D) images reconstructed in interval imaging technique are related to the resolution of elemental images, there has been a problem that ray information of elemental images increases largely in order to obtain high-resolution 3D images. In this paper, to overcome this problem, a new unidirectional integral imaging based on pinhole model is proposed. Proposed method provides a new type of unidirectional elemental images, which are simply obtained by magnifying single horizontal pixel line of each elemental image to the vertical size of lenslet using ray analysis based on pinhole model and used to display 3D images. In proposed method, reduction effect of the ray information of elemental images can be obtained by scarifying vortical parallax. Feasibility of the proposed scheme is experimentally demonstrated and its results are presented.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6D
• /
• pp.961-968
• /
• 2006

Curbs and L-type gutters installed at the edge of a road are very important structures to protect pedestrians from traffic accidents and to restraint slip of cars due to rain. However, existing construction method where great parts of the construction progress are done by human power has many problems in workability, quality and cost etc. In this paper, a new construction method for improvement in workability and quality for curbs and L-type gutters is developed. In order to investigate the structural safety and quality of curbs and gutters installed by the new method, tensile and lateral load tests are performed on curbs installed by existing and new methods and uniaxial compression tests are also performed on concrete samples of gutters constructed by existing and new methods. The test results show that the alignment of curbs and the strength of gutter concrete are very much improved by applying the new method. The tensile and lateral load capacities of the curbs installed by the new method are 10.7 and 2.5 times higher than those of curbs by existing method, respectively.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.6
• /
• pp.109-118
• /
• 1998

This paper presents an ASIC implementation of video encoder which converts either digital RGB or YCbCr to S-video(Y/C) and composite video signal. The video timing signal of this encoder includes horizontal sync., vertical sync. signal and blanking, and this encoder supports field identification signal which is convenient for video editing. The encoder has been designed in the 4 stages pipeline structure to assure the stable operation of each submodule. The proposed encoder requires only 20K gates ,which is a 40% reduction in hardware compared with [13]. The designed encoder was fabricated in $0.65{\mu}m$ SOG triple metal CMOS technology. Chip size is $3.7478mm {\times} 4.4678mm$ including PAD, gate counts is 19,468 and dissipated power is 0.9W.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.830-838
• /
• 2003

In this paper, TX/RX dual operation microstrip single antenna for satellite communication is designed, analyzed, fabricated and measured. TX/RX frequency ranges are 14.0∼l4.5 GHz, 11.7∼12.75 GHz in respectively and vertical and horizontal polarizations are used for TX and RX. This antenna uses microstrip direct feeding for RX and aperture coupled strip-line feeding for TX and accommodates stacked elements for a high directivity and wide impedance bandwidth. In an analysis of single element, FDTD and MOM was compared and FDTD analysis was more accurate because of the consideration of finite structure and imperfect two ground planes. The proposed structure facilitates generally to an extension of two dimensional array and lower an unwanted radiation by strip-line feed in TX. TX/RX 8${\times}$4 array has a return loss below -10 dB, -14 dB in TX, RX respectively and a gain ranging from 19.1∼20.7 dB in TX, 21.2∼21.8 dB in RX which has a radiation efficiency of 43∼5l %, 52∼57 %.

• Journal of Digital Convergence
• /
• v.15 no.12
• /
• pp.555-561
• /
• 2017

The card-based user interface is one of the easiest navigation methods for smart phones, and many of the contents have recently been exposed as cards. In this paper, we have dealt with the definitions of cards and the components of cards used in smart phones. The card can play multimedia including various images and media, and serves as an entry point into detailed contents through the arrangement of buttons or actions. The card UI had different characteristics depending on the type, if it could be classified into basic type, timeline type, workflow type, and dashboard type. The basic type and the timeline type were not suitable for the hierarchy and order of information, and they were suitable for providing large contents. The workflow type was not significantly different from the amount of content, horizontal content arrangement was possible, and the dashboard type was analyzed to be suitable for providing various data as graph or number.

• 한국벤처창업학회:학술대회논문집
• /
• 2023.04a
• /
• pp.7-10
• /
• 2023

IT기술의 발전과 스마트기기의 대중화로 인한 정보통신기술의 눈부신 발전으로 온라인 플랫폼을 통한 식품구매 비중이 급격히 증가하여 온·오프라인의 경계를 없어지고 있다. 더군다나 COVID-19 팬데믹은 반조리식품, 밀키트 등 홈쿡(Home-cook) 온라인시장을 급격히 확산시키며 소비자 구매추세를 오프라인에서 온라인으로 완전히 바꿔놓는 전환점이 되었다. 이런 트랜드를 반영하듯 다양한 온라인 식자재 이커머스 플랫폼의 출현하면서 브랜드마다 각각의 차별점을 내세우고 있으나 경쟁은 치열해지고 차별화는 더욱 어려운 게 현실이다. 이는 기업이 소비자에게 일방향으로 정보 또는 상품 및 서비스를 제공 하는 수직적 관계가 아닌, 수평적 쌍방향 관계로의 발전으로 이어져 브랜드가 가지고 있는 가치에 대해 보다 정직하게 보여주어야 소비자의 신뢰를 얻을 수 있게 되었다(Kotler, 2017). 또한, 과거에 소비자들의 만족도가 높았던 서비스도 현재 환경에서는 소비자의 니즈를 충족시키지 못하는 경우가 증가하고 있다(조윤오, 2018). 이는 서비스에 대한 소비자의 기대와 니즈가 지속적으로 변화하고 있다는 것을 의미하며, 이에 따라 기업은 소비자들의 새로운 요구를 만족시키기 위하여 다양한 서비스를 개발 및 제공하는 것이 중요하다고 사료된다(김광재 등, 2011). 이미 높은 인지도를 가진 플랫폼일지라도 지속가능한 우위를 선점하기 어려운 상황에서 온라인 플랫폼에 대한 소비자의 긍정적인 태도와 재구매를 유도하기 위해 제품 본질 뿐 아니라 서비스 차별화를 꾀하고 있고 차별화된 포지션을 차지하기 위해 온라인 플랫폼에 대한 소비자 인식과 서비스 품질 요인을 측정하여 고객이 중시하는 요인에 집중하는 것이 필요하다. 이에 본 연구는 온라인 플랫폼을 통해 식자재를 구매하는 소비자의 꾸준한 방문과 구매를 유인하기 위해 어떤 변수의 영향력을 높여야 소비자 재구매의도를 증가시킬 수 있는지 방법을 모색하고 온라인 플랫폼 기업 및 스타트업의 경영전략 마련에 목적이 있다. 이를 위해 식자재 구매 플랫폼 품질속성, 서비스품질 정도,, 충성도의 전반적인 영향관계를 파악하는 연구 과제를 설정하고, 식자재 이커머스 온라인 플랫폼 이용 전반에 대한 평가를 실시할 예정이다. 이러한 과정을 통해 도출된 결과는 식자재 이커머스 플랫폼 운영 전략을 세우는데 유용한 자료가 될 것이라 기대하며, 기존의 온라인 식품구매 플랫폼의 서비스품질 요인과 소비자 행동 간의 관계를 설명하는 것과는 다른 새로운 시사점을 제공할 수 있다는 측면에서 의미 있는 연구가 될 것이다. 또한, 다양한 산업에서의 플랫폼 비지니스 모델 적용을 위한 전략 수립을 하는 데에 필요한 기초자료를 마련하고자 한다.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.2
• /
• pp.332-350
• /
• 2019

Zonal hydrographic section measurements at $39.7^{\circ}N$ were conducted between $129.0^{\circ}E$ and $131.3^{\circ}E$ from August 7 to 25 in 2017 using an underwater glider. The glider traveled about 440 km for about 18 days along the 106 line of the regular shipboard measurements in the National Institute of Fishery Science (NIFS) and obtained twice a hydrographic section with high horizontal resolution. Even under the strong East Korea Warm Current with maximum speed of 0.8 m/s across the section, the glider successfully maintained the designated path within an RMS distance of 400 m. By comparing with the NIFS shipboard hydrographic section, it is confirmed that high spatial resolution measurements obtained from a glider were necessary to properly observe front and eddy variability in the East Sea where a typical spatial scale is smaller than the open oceans. From the glider section measurements, a new lens-shaped eddy was found in the thermocline. The lens-shaped anticyclonic eddy had 10~13 km in horizonal width and about 200 m in height like a typical submesoscale eddy resided within the thermocline, which was firstly named as Korea intrathermocline eddy (Keddy). The Keddy has the distinguishing characteristics of a typical intrathermocline eddy, such as a central core with anomalously weak stratification, a convex shaped lens bounded by the stratification anomaly, an interior maximum of velocity at 170 m, no surface appearance of the geopotential field, a small or comparable horizontal width relative to the first baroclinic Rossby radius of deformation, and the Rossby nubmer of 0.7.