• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.9 s.174
• /
• pp.93-98
• /
• 2005

The purposes of this paper are the review and derivation of design characteristics for the new construction of the practical flexible manufacturing system. The basic ideas to analyze the manufacturing system which is the automatically operated are dependant on the various manufacturing procedures in factory. The practical flexible manufacturing systems have various mechanical subsystems appropriated fur the final manufacturing products. Therefore the systems have the various kinds of hardwares as well as softwares. We study the software for the practical flexible manufacturing system designed and developed in the Halla University with the related company. Specially the design concepts and using specifications of all subsystems which are composed of mechanical and electronic movements of the product are analyzed and introduced in this dissertation.

• Proceedings of the KIEE Conference
• /
• 2004.05b
• /
• pp.166-168
• /
• 2004

근래에 무인 자동화기술의 발달과 마이크로프로세서 기술의 혁신적인 성장에 힘입어 일반산업현장에서 사용되고 있는 로봇은 복잡하고 다양한 작업이 요구되는 비제조업분야로 그 적용분야가 확장되고 있다. 그 대표적인 분야를 들자면 방사능 지역과 같은 위험한 환경에서의 작업, 우주공간이나 심해에서의 작업, 활선 작업과 같이 사람이 접근하기 어려운 곳에서 인간을 대신하는 작업 등이 있다. 이와 같이 사람이 접근하기 어려운 지역에서 인간을 대신하여 작업을 수행할 수 있는 원격작업 로봇시스템을 개발하였다. 개발된 로봇은 6 자유도를 갖는 수평다관절 유압구동형 조작기로써 로봇의 운반 및 설치가 용이하도록 제 1 링크의 분리가 가능하도록 설계하였다. 로봇의 제어기는 전체 제어기를 통괄하는 1 개의 마스터 CPU 및 3 개의 제어보드로 구성되며 이들은 VME 버스를 이용하여 데이터를 전송한다. 로봇의 관리제어시스템은 그래픽워크스테이션을 이용하여 구성하였으며 로봇의 작업상황을 실시간으로 애니메이션하여 작업자에게 원격현장감을 제공하고 작업효율의 향상시켰다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.3
• /
• pp.40-46
• /
• 2008

This paper presents the optimal motion control for 3-axis SCARA robot by using $LabVIEW^{(R)}$. Specifically, for optimal motion control of 3-axis SCARA robot, we study velocity profile based on finite jerk(the first derivative of acceleration) and optimal gain tunig based on frequency response method by using $LabVIEW^{(R)}$. The velocity optimization with finite jerk aims at generating the smooth velocity profile of robot. Velocity profile based on finite jerk is acquired and applied to 3-axis SCARA robot by using $LabVIEW^{(R)}$. DSA(Dynamic Signal Analyzer) for frequency response method is programed by using $LabVIEW^{(R)}$. We obtain the bode plot of transfer function about 3-axis SCARA robot by using DSA, and perform the gain tuning considering dynamic characteristic based on the bode plot. These experiments have shown that the proposed motion control can reduce vibration displacement and response error rate each 33.7% and 51.7% of 3-axis SCARA robot.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.4
• /
• pp.371-392
• /
• 2011

The purpose of this study was to comparatively analyze the stress distribution according to the inclinations of abutments and angulations of the implant fixtures under occlusal loading force. Three study models with straight and $15^{\circ}$ and $25^{\circ}$-angled abutments were prepared following the insertion of Implants parallel to the long axis of the tooth. Additional two experimental models were fabricated with $15^{\circ}$ and $25^{\circ}$ fixture inclinations. Using ANSYS 11, a finite element analysis program, the magnitudes of stress distribution were analyzed. The magnitude of stress under loading was lowest when the load was applied vertically onto the axis of implant. And the magnitude of stress under compound(vertical+oblique) loading was increased as the inclination of implant abutment and fixture was increase. But, the distribution of stress was different as the loading conditions, because of the horizontal offset. As the offset between the axis of loading and the central axis of the implant increased, the stress was increased.