• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.1
• /
• pp.127-136
• /
• 2006

Shaded relief is used in the analysis of digital terrain model, but accurate shadow zone has not been affirmed on account of idea only shadow of terrain that would be in shadow are shaded. This study is to analyze each display difference of a digital terrain model by grasping the shadow characteristics of terrain and comparing shaded relief function used terrain display of GIS with a rendering technique. After terrain with road in subject area is selected and created to digital terrain model of TIN, shaded relief and rendering according to altitude and azimuth of the sun at 9:00 am and 3:00 pm is applied. As the results, only backward portions of the terrain that is in shadow from the sunlight are shaded in case of shaded relief. The rendering created the shadow, which is cast by terrain features. By these mutual comparison, this study represented data for understanding of shaded relief. And it is expected that the rendering method could be used to analyze sunshine influence.

• Water for future
• /
• v.25 no.3
• /
• pp.87-96
• /
• 1992

Hydraulic characteristics such as velocity, surface level and flow pattern in the curved channel are analyzed by model experiment, where model is scaled down by 1:20 for prototype channel containing side branch and curved section. The withdrawal of channel flow from channel is analyzed to find the effect on the curve section. The numerical scheme for shallow water equation using ADI method is verified through the comparison of hydrauric characteristics by experiment with that by numerical analysis in the side section of model channel. The comparison of numerical results with experimental data shows that velocity, surface level and flow pattern agree well for overall channel. Because fo the relative contraction of cross section in the curved section caused by rectangular system, the velocity calculated by numerical analysis is faster in curved section than that from experiment, which can be improved using finer spatial grid in curved section. The characteristics of the curved section such that the surface level is higher in the outer zone of curved section and the velocity is faster in the inner zone are well simulated by both experiment and numerical analysis. The effect of side branch reaches within the zone of the curved section.

• Journal of Korea Water Resources Association
• /
• v.33 no.1
• /
• pp.111-121
• /
• 2000

A numerical model which can analyze the flow and bed topography characteristics of a single bend and continuous one was suggested using the equations of mass, momentum, the vertical distribution of secondary flow, and the transverse bed slope. The calculated flow and bed topography characteristic values were compared with the experimental data in a single bend, and the predicted path of maximum streamwise velocity in continuous bends also compared with the Vadnal and Chang's data. The comparisons gave good results. A curved channel with 180 degrees was used. Sand and anthracite were selected as bed materials in the movable bed experiments. The model application of this model to the sand bed and the anthracite one accorded well with the observed values in the experiments. This model was proved to be useful for predicting the flow and bed topography with the change of bed materials. The results of this research could be used to construct and control curved channels as a fundamental information.mation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.2
• /
• pp.209-218
• /
• 1994

This study aims to generate triangulated irregular network in a form of digital terrain model which is being increasingly used. In general, grid digital elevation model and triangulated irregular network are reasonable units for solving terrain problems. But, triangulated irregular network is an efficient alternative to grid digital elevation model because of their efficiency in storing data and their convenient data structure for accommodating irregularly spaced elevation data. Various methods represented for extracting triangulated irregular networks from grid digital elevation model, and then algorithm that get accurate results for triangulation with their data set was introduced. The new approach for triangulation in this study uses the Elevation and Changeable Distance criterion, and adding interpolation points and restricted constraint lines can generate triangulated irregular network which is more close to real surface. This made database efficient construction and could be used for many applications of geo-spatial information system.

• Journal of Korea Water Resources Association
• /
• v.38 no.3 s.152
• /
• pp.189-198
• /
• 2005

This study showed that numerical simulation can be effectively used to analyze discharge capacity according to the form and arrangement of the lock gate of a tidal power plant. For the numerical simulation, FLOW-3D with Reynolds-averaged Navier-Stokes equation as a governing equation was used. This study found that improvement of apron length and approach angle of guide wall of the lock gate causes differences in discharge capacity of $10\%$ or more. In addition, there was a difference of discharge capacity caused by the connecting structures of the drainage gate and hydraulic turbine structure and the side slope at the end of apron. This study also showed that hydraulic investigation to enhance a discharge capacity is needed when the lock gate is designed and that numerical model experiments can be a useful analysis tool to design the drainage structure, as well as the hydraulic model experiment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1739-1744
• /
• 2010

The calculation method using the numerical model developed is currently one of the mose required method to predict sediment transport and bed changes in the rivers. Specially, it is real condition that is applying as it is a single sediment transport equation and sediment transport mode mostly without verification process with field data. The sensitivity analysis and calibration process considering the different sediment transport equations and sediment transport modes should be performed for the accurate bed change prediction of the specified study reach using the a model. Through its process, the optimum sediment transport equation and mode for the study reach should be defined. In this study, bed changes for the actual river are computed using the CCHE2D model allowed to select various sediment transport equations and modes. The bed change sensitivity analysis with different ranges of river flow discharge through its process, the optimum sediment transport equation and mode for the study reach should be defined. The bed change simulation with the actual hydraulic condition and the modeling results are compared with the field survey results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.604-604
• /
• 2012

국지성 집중호우에 따른 도심지 내수 침수 피해의 주원인으로 하수관거의 설계기준을 초과하는 강우가 침수피해의 주요 원인이며, 도심화로 인해 불투수 면적이 증가함에 따라 유출되는 시간이 짧아 저지대의 피해는 불가피하다. 2010년과 2011년에 100년 이상의 강우사상이 서울시에 연이어 나타나면서 집중호우로 인한 피해지역이 유사하게 나타났으며, 광화문 거리의 연이은 침수는 현재 서울시의 하수관거의 용량과 빗물펌프장 및 저류조 시설로 구성된 기존 수방대책의 한계점을 보이고 있다. 이에 서울시는 광화문 일대의 배수능력을 향상시키기 위하여 효자배수분구 빗물배수터널을 계획하고 있다. 일본, 미국 및 유럽 등지에서는 대심도 지하수로 시설에 대한 수리실험 및 수치 연구를 바탕으로 다양한 지하방수로가 건설되어 국지성 집중 강우에 대해 적절히 대응하고 있으나, 국내의 경우에는 대심도 지하방수로 시설에 대한 연구가 미비하여 지하방수로 설계 지침 및 기술적 자료가 부족한 실정이다. 그러므로 대심도 빗물배수터널 시설에서의 흐름특성 분석에 관한 수리실험 및 수치해석 등의 구체적인 연구가 필요하다고 판단된다. 본 연구에서는 수리모형 실험의 물질적 및 시간적 한계를 극복하기 위하여 일반적으로 3차원 유체거동의 특성분석에 많이 사용되는 Fluent 6.3 모형을 이용하여 대심도 빗물배수터널 시설의 접선식 유입구에 대한 흐름특성을 수치모의 하였다. 접선식 유입구 및 수직갱(drop shaft)에 대한 기하 모형의 격자망은 수치해석의 안정성 확보를 위하여 그림 1과 같이 6면체 격자로 구성하였다. 맨홀 내의 다상유동을 고려하기 위하여 VOF(Volume of Fluid) Scheme을 적용하였으며, 수치해석 방법으로는 비정상류, 1st order implicit method를 사용하였다. Fluent에서의 난류 흐름을 계산하는 방법에는 난류 운동에너지와 난류 에너지 소산율 $\epsilon$의 전달 방정식을 도입한 k-$\epsilon$ 난류 모형을 채택하였다.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.2
• /
• pp.59-65
• /
• 2008

Digital close-range photogrammetric technique can measure and describe 3D geometric farm from 2D image. This technique is increasingly applied in the field of sciences. In the fields of civil and mechanical engineering, which need precise measurements for design, expensive measuring equipments are widely used. In occasions where visual inspection is required in addition to other forms of measurements, appropriate measuring equipments have not been yet available. This study utilizes digital close-range photogrammetric technique to quantitatively analyze behavior patterns before and after destruction from test model of reinforced-soil wall. Then the results are compared with the measurements obtained using digital theodolite to verify the reliability of the proposed method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.92-92
• /
• 2022

산 사면의 지반이 붕괴되어 흙, 모래, 자갈 그리고 물 등이 혼합하여 유동하는 토석류는 예측과 대비가 어려운 자연재해 중 하나 이다. 특히, 강우로 인해 발생하는 토석류의 경우 매우 빠르게 유동하기 때문에 피해 예측이 제한적이다. 이러한 토석류가 도심지역 또는 마을주변에서 발생할 경우 많은 인명 및 재산 피해가 발생한다. 따라서 토석류의 유동을 최소화시키기 위해선 1차적으로 수치모형을 통한 전반적인 유동 및 피해 규모 예측이 이루어져야 하며, 이러한 분석을 바탕으로 사방댐과 같은 구조물의 효율적인 설계가 이루어져야 한다. 이에 수치모형을 통해 토석류의 유동을 분석하고자 하는 많은 연구가 진행된 바 있으며, 사방댐 설계 분석 또한 수치모형과 실험을 통해 연구된 바 있다. 선행연구들에 따르면, 1) 발생부로부터의 거리, 2) 토석류 에너지의 감소, 3) 침식-연행 작용, 4) 사방댐의 용량 등이 효율적인 사방댐 설계에 영향을 미친다고 분석된 바 있다. 하지만 위의 항목들에 대한 종합적인 비교분석은 미비한 실정이다. 따라서 본 연구에선 위에서 제시한 4가지의 항목들을 바탕으로 사방댐 설계에 중요한 요소를 평가하고 산정하고자 한다. 토석류의 유동과 사방댐을 모의분석하기 위해 Deb2D 수치모형을 활용하였으며, Voellmy 유변학적 모형과 침식-연행-퇴적 작용을 분석할 수 있는 알고리즘을 사용하여 토석류의 유동을 현실에 가깝게 모의하였다. 2011년 서울 우면산에서 발생한 산사태 유역들 중에서 래미안 아파트 유역과2019년 강원도 갈남리에서 발생한 산사태를 대상지구로 선정하였다. 연구 결과에 따르면 4가지 요소들 중에서 사방댐의 용량이 효율적인 사방댐 설계에 가장 주요한 요인으로 분석되었다.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.4
• /
• pp.33-43
• /
• 2023

The impact of prolonged rainfall, such as during the monsoon season or intense concentrated rainfall over a short period, can lead to mountainous disasters such as landslides and debris flows. These events, such as landslides and debris flows, cause both human and material damage, prompting the implementation of various measures and research to prevent them. In the context of researching debris flow disasters, numerical models for debris flows provide a relatively simple way to analyze the risk in a study area. However, since empirical equations are applied in these models, yielding different results and variations in input variables across models, the validation of numerical models becomes essential. In this study, a numerical model for debris flows was employed to compare and analyze the mitigation effects of facilities such as check dams and water channel work, aiming to reduce the damage caused by debris flows.