• Phonetics and Speech Sciences
• /
• v.11 no.1
• /
• pp.29-40
• /
• 2019

The paper investigates the minimal pair of Korean phonemes quantitatively. To achieve this goal, I calculated the number of consonant minimal pairs in the syllable-initial position as both raw counts and relative counts, and analyzed the part of speech relations of the two words in the minimal pair. "Urimalsaem" was chosen as the object of this study because it was judged that the minimal pair analysis should be done through a dictionary and it is the largest among Korean dictionaries. The results of the study are summarized as follows. First, there were 153 types of minimal pairs out of 337,135 examples. The ranking of phoneme pairs from highest to lowest was 'ㅅ-ㅈ, ㄱ-ㅅ, ㄱ-ㅈ, ㄱ-ㅂ, ㄱ-ㅎ, ${\ldots}$, ㅆ-ㅋ, ㄸ-ㅋ, ㅉ-ㅋ, ㄹ-ㅃ, ㅃ-ㅋ'. The phonemes that played a major role in the formation of the minimal pair were /ㄱ, ㅅ, ㅈ, ㅂ, ㅊ/, in that order, which showed a high proportion of palatals. The correlation between the raw count of minimal pairs and the relative count of minimal pairs was found to be quite high r=0.937. Second, 87.91% of the minimal pairs shared the part of speech (same syntactic category). The most frequently observed type has been 'noun-noun' pair (70.25%), and 'vowel-vowel' pair (14.77%) was the next ranking. It can be indicated that the minimal pair could be grouped into similar categories in terms of semantics. The results of this study can be useful for various research in Korean linguistics, speech-language pathology, language education, language acquisition, speech synthesis, and artificial intelligence-machine learning as basic data related to Korean phonemes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4C
• /
• pp.247-254
• /
• 2006

Online testing method is one of the numerical experiment methods using experimental information for a numerical analysis directly. The method has an advantage in that analysis can be conducted without using an idealized mechanical model, because mechanical properties are updated from element test for a numerical analysis in real time. The online testing method has mainly been used for the geotechnical seismic engineering, whose major target is sand. A testing method that may be applied to a consolidation problem has recently been developed and laboratory and field verifications have been tried. Although related research thus far has mainly used a method to update average reaction for a numerical analysis by positioning an element tests at the center of a consolidation layer, a weakness that accuracy of the analysis can be impaired as the thickness of the consolidation layer becomes more thicker has been pointed out regarding the method. To clarify the effectiveness and possible analysis scope of the online testing method in relation to the consolidation problem, we need to review the results by applying experiment conditions that may completely exclude such a factor. This research reviewed the results of the online consolidation test in terms of reproduction of the consolidation settlement and the dissipation of excess pore water pressure of a clay specimen by comparing the results of an online consolidation test and a separated-type consolidation test carried out under the same conditions. As a result, the online consolidation test reproduced the change of compressibility according effective stress of clay without a huge contradiction. In terms of the dissipation rate of excess pore water pressure, however, the online consolidation test was a little faster. In conclusion, experiment procedure needs to improve in a direction that hydraulic conductivity can be updated in real time so as to more precisely predict the dissipation of excess pore water pressure. Further research or improvement should be carried out with regard to the consolidation settlement after the end of the dissipation of excess pore water pressure.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.1
• /
• pp.139-151
• /
• 2018

The National Base Map construction consists of the regular correction work of dividing the whole country into two regions and carrying out the modification Plotting by aerial photographs every two years as well as the real time updating work of correcting the major change feature within two weeks by the field survey and the As-Built Drawing. In the case of the Building Layout Drawing of Korea Real estate Administration intelligence System(KRAS) used for real time updating work of the National base map, the coordinate transformation error is included in the positional error when applied to the National Base Map based on the World Geodetic Reference System as the coordinate system based on the Regional Geodetic Reference System. In addition, National Base Map is registered based on the outline(eaves line) of the building in the Digital Topographic Map, and the Cadastral and Architecture are registered based on the building center line. Therefore, the Building Object management standard is inconsistent. In order to investigate the improvement method, the network RTK survey was conducted directly on a location of the Building Layout Drawing of Korea Real estate Administration intelligence System(KRAS) and the problems were analyzed by comparing with the plane plotting position reference in National Base Map. In the case of the general structure with the difference on the Building center line and the eaves line, beside the location information was different also the difference in the ratio of the building object was different between Building center line and the eave. In conclusion, it is necessary to provide the Base data of the double layer of the Building center line and the outline of the building(eaves line) in order to utilize the Building Layout Drawing of Korea Real estate Administration intelligence System(KRAS). In addition, it is necessary to study an organic map update process that can acquire the up-to-dateness and the accuracy at the same time.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.1
• /
• pp.31-44
• /
• 2008

The 1st phase framework data implementation of National Geographic Information Systems (NGIS) used 1:5,000 digital map with 5 years updating period which is lacking in the latest information. This is a significant factor which hinders the use of framework data. This study proposed the efficient technical method of a location based object data management and system implementation for updating framework data. First, we did an object-oriented data modeling and database design using a location based features identifier(UFID: Unique Feature IDentifier). The second, we developed the system with various functions such as a location based UFID creation, input and output, a spatial and attribute data editing, an object based data processing using UML(Unified Modeling Language). Finally, we applied the system to the study area and got high quality data of 99% accuracy and 35% benefit effect of personnel expenses compare to the previous method. We expect that this study can contribute to the maintenance of national framework data as well as the revitalization of various GIS markets by providing user the latest framework data and that we can develop the methods of a feature-change modeling and monitoring using an object based data management.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.3
• /
• pp.101-113
• /
• 2015

The purpose of this study is increasing ventilation network usability for urban green space planning by enhancing its practicality and detail. A ventilation network feature extraction technique using roughness length($z_0$) was proposed. Continuously surfaced DZoMs generated from $z_0$(cadastral unit) using three interpolations(IDW, Spline, and Kriging) were compared to choose the most suitable interpolation method. Ventilation network features were extracted using the most suitable interpolation technique and studied with land cover and land surface temperature by spatial overlay comparison. Results show Kriging is most suitable for DZoM and feature extraction in comparison with IDW and Spline. Kriging based features are well fit to the land surface temperature(Landsat-7 ETM+) on summer and winter nights. Noteworthy is that the produced ventilation network appears to mitigate urban heat loads at night. The practical use of proposed ventilation network features are highly expected for urban green space planning, though strict validation and enhancement should follow. (1) $z_0$ enhancement, (2) additional ventilation network interpretation and editing, (3) linking disconnected ventilation network features, and (4) associated dataset enhancement with data integrity should technically preceded to enhance the applicability of a ventilation network for green space planning. The study domain will be expanded to the Seoul metropolitan area to apply the proposed ventilation network to green space planning practice.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.1
• /
• pp.70-79
• /
• 2014

Following the technology developments of traffic network and communication for the wide area, the importance of the cooperation system to vitalize the wide area economy is increasing. Therefore, in this study, DongNam Kwon industry information system is established for the industrial information sharing based on GIS in the DongNam Kwon wide area economy. The DongNam Kwon is an industrial integration area centered with the manufacturing so that the operation of effective industrial cluster and cooperation systems are required across the administrational boundaries. To establish the database of the information, the information system was established utilizing already established industrial databases in Busan, Ulsan and Gyeongnam. But, various issues caused by the discordances among the data of each local government and the insufficiency of GIS based location information have been found. According to the analysis, the standardization considering the courses of collection, distributions and utilization are required immediately to solve the issues. This study establishes an 2-way industrial information system enabling the information creation and the phased approach between the administrator and the user in the bi-directions on the web by utilizing cadastral and numerical maps. The result of this study would have a meaning in providing a fundamental frame for cooperative responses and cooperation system for DongNam Kwon's industrial promotion using industrial information sharing.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.213-223
• /
• 2017

Recently, the air quality of South Korea has deteriorated and public interest has been increasing. Various observation means are used for the monitoring of the atmospheric environment, but it relies on the experience and judgment of the observer in the absence of spatial information on the emission facilities. The purpose of this study was to determine the availability of using drones for monitoring air pollutant emission facilities. A texture transformation method was applied to the drone ortho image to detect the small gas emission facility and the slope data calculated by the digital surface model (DSM) was used to reduce the false alarm ratio. As a result, it shows the possibility of using drones in the detection of small gas emission facilities by showing about 80% of positive detection ratio and 40% of false alarm ratio. In the future, various researches are required to the improve positive detection ratio and the reduction of the false alarm ratio. Based on these results, it is necessary to construct a database including 3D spatial information of air pollutant emission facilities.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.4 s.60
• /
• pp.48-52
• /
• 2006

2006 CISPR 총회가 스웨덴 스톡홀름 KISTA에서 개최되었다. CISPR I 회의는 9월 18일부터 20일까지 3일간 WG2 및 WG4를 중심으로 진행되었으며, WG1과 WG3 회의는 9월 20일 오후에 있었다. 우리나라에서는 WG1에 두 가지 제안을 발표하였다. 하나는 2004년 중국 상해 회의에서 처음 제안하여 2005년 남아공 케이프타운 회의에서 Task Force가 구성된 대형 시험품에 대한 CISPR 20의 외부 방사내성 시험레벨에 관한 것이다. 2006년 1월 미국 산타페에서 열린 TF 회의에서 시험결과에 대한 기술적 토론이 있었으며, Round Robin Test(RRT)를 실시하기로 결정되었다. RRT시험은 7월 중순에 실시되었으며, 참여한 시험소는 영국의 SONY, 네덜란드의 Philips, 독일의 SHARP 이었으며, 국내의 여러 EMC 시험소도 추후에 참여하였다. RRT 시험의 결과 및 분석이 이번 스톡홀름 회의에서 발표되었다. 또한, CISPR 13의 방사성 방출(RE)의 측정거리 기준점의 변경에 관한 것이다. 본 고에서는 TV 수신기에 대한 RRT 시험결과 및 분석에 대한 발표 내용을 소개하고자 한다. CISPR 20의 외부 전자기장 내성 시험은 0.8 m인 개방형 스트립라인(Open Strip-line: OSL)내에 시험품을 설치하고 $150kHz{\sim}150MHz$에서 시험하도록 규정하고 있다. OSL에 설치할 수 없는 대형기기는 IEC 61000-4-3에 따라서 주파수 범위 $80MHz{\sim}150MHz$까지 동일한 한계치로 전자파무반사실에서 시험하도록 규정되어 있다. 이에 대해 국내 제조업체 및 EMC 전문가들로 구성된 CISPR I 국내 위원회에서는 IEC 61000-4-3에 의한 전자파무반사실(챔버)에서의 내성시험이 CISPR 20에 의한 OSL에서의 내성시험보다 가혹하다는 문제 제기가 있었다. 이것이 본 안건에 대한 배경이다 지금까지 진행되어 왔던 내용을 요약해 보면 2004년 상해 회의에서, 수치해석 및 측정비교를 통하여 CISPR 20에서 규정하고 있는 OSL 전기장 교정방법의 개선의 필요성과 OSL에서 시험할 수 없는 대형 시험품에 대하여 시험레벨을 조정할 것을 지적하였다. 2005년 케이프타운 회의에서는 실제적으로 TV 방송 수신기 및 관련기기가 두가지 방법으로 시험되었을 때 시험결과에 미치는 영향을 시험품의 전기장 내성 레벨로 비교하였으며, 전자파무반사실에서 시험할 경우 시험레벨이 12 dB 낮추도록 보정되어야 할 것을 제안하였다. 2006년 이번 회의에서는 세계 각국의 시험소와 비교시험을 통하여 나타난 OSL과 전자파무반사실 간의 시험결과의 차이 및 이에 대한 원인을 분석하여 보고하였다. OSL과 전자파무반사실 비교시험에서 나타난 차이는 평균적으로 9 dB의 차이로 나타났으며, 주요 원인은 OSL에서 적용하고 있는 시험품을 OSL내부에 설치한 후 시험품에 의해 변경된 전기장의 세기를 보정해 주는 인자(k2)로 인한 차이(6 dB)와 OSL 내부의 전기장의 세기와 전자파무반사실 균일장 영역의 전기장의 세기의 차이(3 dB)이다.

• Proceedings of the Korean Journal of Food and Nutrition Conference
• /
• 2003.07a
• /
• pp.78-78
• /
• 2003

심혈관계질환의 예방과 영양교육의 기초자료를 제공하기 위하여 성인 남녀를 대상으로 규칙적인 운동 습관과 음주, 흡연, 폐경, 비만 여부에 따라 신체계측치와 콜레스테롤, 중성지방, LDL-cholesterol, LDL-cholesterol 등의 혈청지질 및 영양소 섭취량을 비교 조사한 결과는 다음과 같다. 1)체중이나 신장, 비만 정도 및 WHR 등 신체계측지수는 음주나 흡연 여부에 따른 차이가 없었으나, 혈청 중성지방 농도를 유의적으로 상승시켰다. 2)음주군은 비음주군에 비하여 단백질의 열량비율(% RDA)이 유의적으로 높았으며(p<0.05), 흡연군은 비타민 A와 나이아신, 비타민 B6, 엽산, 비타민 C, 비타민 E의 섭취량에 있어서 비흡연자들보다 낮은 경향을 보였다. 3)운동에 의한 혈청지질 농도에는 뚜렷한 차이가 없었으나, 남성들의 경우 현재의 체중과 PIBW, Quetlet index, 엉덩이둘레가 비운동자들보다 많은 것으로 나타났다. 영양소 섭취량에 있어서 남성의 경우 운동군이 비운동군에 비해 콜레스테롤과 나이아신 및 인을 더 섭취하고 있었으며, 당질의 섭취비율은 유의적으로 더 낮았다(p<0.05). 여성의 경우에는 불포화지방에 유의적 차이를 보여 비운동군의 불포화지방 섭취량이 더 많았다(p<0.05). 4)폐경한 여성의 경우 폐경 전 여성에 비하여 신장은 더 작고 WHR은 더 높았다. 폐경 이후 estrogen 분비의 변화로 인하여 혈중 지질 성분 중에서는 cholesterol이 198.4$\pm$36.3mg/dl, LDL이 119.5$\pm$34.9mg/dl로 폐경 전의 수치보다 유의적으로 높았다(p<0.01). 5)비만 여부는 남자의 경우 콜레스테롤 농도에(p<0.01)), 여자의 경우 중성지방 농도(p<0.01)에 대해 의미있는 설명력을 보이는 변수로 작용하고 있었다. 그러나 식이 섭취상태와의 관련성은 나타나지 않았다. 이상에서 생활습관이 신체계측치 및 혈중 지질 농도와 일부 상관을 보이는 것을 알 수 있었으며, 건강위험 요인도 관찰할 수 있었다. 고지혈증은 심혈관계질환의 주요한 위험 인자로 알려져 있으며, 그 유발 요인에는 여러 환경적인 요인과 식이 요인이 있다. 또한 생활습관은 영양소의 섭취량에도 영향을준다. 이처럼 식이 요인과 생활습관은 단독 혹은 상호 영향을 주게 되므로 고지혈증 및 심혈관계질환을 개선하려면 식사요법과 생활습관 교정을 병행하여야 한다. 고지혈증의 원인 중의 하나로 지적되고 있는 음주와 흡연은 상호 유도작용이 있으므로 금연이나 절주를 하고자 할 경우 두가지를 동시에 자제해야 효과적일 것으로 생각된다. 폐경후 여성들에게 발생 빈도가 높은 심혈관질환의 위험요인인 고지혈증을 예방하고자 하는 노력은 폐경후 여성들의 삶의 질적 향상을 위해서도 매우 중요하다. 또한 균형식 섭취와 운동을 통해 혈중 지질 수준을 건강하게 유지하고, 비만으로의 이행을 방지함으로써 심혈관계질환을 예방하도록 하여야겠다.

• Journal of Food Hygiene and Safety
• /
• v.3 no.3
• /
• pp.117-129
• /
• 1988

Packaged meal manufacturing establishments in Seoul city and Kyungkido province were assessed in terms of the sanitary conditions and practices, time and temperature, and microbiological quality. Sanitary check-lists were developed to evaluate the sanitary condition of sampled packaged meal manufacturing establishments. Microbiological tests on.food containers, equipments, and foods in various phases of product flow were done. The results of the study are summarized as follows; 1) Sanitary condition of kitchen.and sanitary practices of employees in.large and medium establishments were evaluated as the some improvement required in order to meet all standards. But sanitary practices of employees in small establishments were evaluated as the unsatisfactory state with negligence or ignorance of safe practice. 2) The microbiological quality of basic ingredients and food materials after pre-preparation were poor. 3) Time and temperature data indicated that phases of holding ingredients at room temperature after cooking, assembly and packaging before delivery were critical. 4) Microbiological test results for food containers, equipments indicated that sanitary conditions of stainless steel ware, knife, wiping clothes and cutting board should be improved promptly. 5) Critical control points identified were ingredients, pre-preparation, Holding, and assembly and packaging. 6) Guidelines were suggested for effective quality control of packaged meals production.