• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.217-225
• /
• 2019

The chimi(ridge-end tile) of Wangheungsa temple is the oldest in our country. The upper part of the chimi was excavated from the southern side of Wangheungsa temple and the lower part from the northern side. These parts are considered to be portions of the same chimi, because they are similar in shape and are excavated from two sides of the same temple structure. However, the original shape of the chimi cannot be determined owing to substantial deterioration. Hence, in this study, replicas of the deteriorated chimi portions of Wangheungsa temple were fabricated by employing 3D scanning technology and the computer numerical control machining method. While observing the bending phenomenon of the chimi, the proposed model was warped realistically on the basis of the bending direction of the actual chimi. Consequently, the restoration process was modified several times. The results indicated that no gaps can be found between the upper and lower parts, and the corresponding patterns connect naturally. Furthermore, the proposed method is contactless, safe, operable, reproducible, and appropriate for restoration of artifacts. Additionally, the modeling data is semi-permanent. Hence, if modelling data is appropriately applied as per the characteristics of artifacts, it can be utilized in various fields such as virtual exhibitions, hands-on exhibitions, cultural heritage restoration, and production of teaching aids and souvenirs.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.1
• /
• pp.13-21
• /
• 2020

Surrogate models have been used for the rapid estimation of six-DOF aerodynamic coefficients in the context of the design and control of a missile. For this end, we may generate highly accurate surrogate models with a multitude of aerodynamic data obtained from wind tunnel tests (WTTs); however, this approach is time-consuming and expensive. Thus, we aim to swiftly predict aerodynamic coefficients via co-Kriging using a few WTT data along with plenty of computational fluid dynamics (CFD) data. To demonstrate the excellence of co-Kriging models based on both WTT and CFD data, we first generated two surrogate models: co-Kriging models with CFD data and Kriging models without the CFD data. Afterwards, we carried out numerical validation and examined predictive trends to compare the two different surrogate models. As a result, we found that the co-Kriging models produced more accurate aerodynamic coefficients than the Kriging models thanks to the assistance of CFD data.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.2
• /
• pp.513-525
• /
• 2018

A 3 dimensional numerical analysis for shield TBM tunnel should take into account various characteristics of the shield TBM excavation, such as gap, tail void, segment installation, and backfill injection. However, analysis method considering excavation characteristics are generally mixed with various method, resulting in concern of consistency and reliability degradation of the analytical results. In this paper, a parametric study is carried out by using actually measured ground settlement data on various methods that can be used for 3 dimensional numerical analysis of shield TBM tunneling. As a result, we have analyzed and arranged an analytical method to predict similarly the behavior of ground settlement and tunnel face pressure at the design stage. Skin plate pressure, backfill pressure and soil model have been identified as the most significant influences on the ground settlement. The grout pressure model is considered to be applicable when there is no volume loss information on the excavated ground, such as seabed tunnels, or when it is important to identify the behavior around a tunnel, such as surface settlement as well as face pressure. And it is considered that designers can use these guidelines as a base material to perform a reasonable 3 dimensional numerical analysis that reflects the ground conditions and the features of the shield TBM tunneling.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.3
• /
• pp.45-51
• /
• 2016

Existing real-time signal control system was brought up typical problems which are supersaturated condition, point detection system and loop detection system. For that reason, the next generation signal control system of advanced form is required. Following thesis aimed at calculating queue length for the next generation signal control system to utilize basic parameter of signal control in crossing queue instead of the volume of real-time through traffic. Overflow saturated condition which was appeared as limit of existing system was focused to set-up range. Real-time location information of individual vehicle which is collected by GPS data. It converted into the coordinate to apply shock wave model with an linear equation that is extracted by regression model applied by a least square. Through the calculated queue length and link length by contrast, If queue length exceed the link, queue of downstream intersection is included as queue length that upstream queue vehicle is judeged as affecting downstream intersection. In result of operating correlation analysis among link travel time to judge confidence of extracted queue length, Both of links were shown over 0.9 values. It is appeared that both of links are highly correlated. Following research is significant using real-time data to calculate queue length and contributing to signal control system.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.12
• /
• pp.3794-3803
• /
• 2000

In a Video-on-Demand system, admission control that is used to serve multimedia data efficiently has to be perfonned by an accurate grasp of the condition of surplus resources. Most of all. we need to adaptable admission control mechanism because the disk has irregular response time caused by external elements of disk, and also has high deviation of amount demanded. In previous admission control schemes, they determined whether a new user is granted or not through a theoretical value. Although they based on the measurement, they left much to be desired in dealing with the service state. Measurement ~based statistical admission control scheme, as we su~~ested in this research, perfonns 2 processes of off-line process and on-line process in real service environment. Through this processes, we can grasp the accurate resource state of system and adaptive!y detennine the admission according to circumstances. Therefore, it can guarantee both maximum resource utilization and QoS(Quality of Service). On performance evaluations, we show that the video server can utilize maximum resource utilization with QoS guarantee through precision of perfonnance by measurement and adaptable admission control according to the requested bandwidth.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.4 s.34
• /
• pp.11-17
• /
• 2005

This study is to improve the modification of survey data and efficiency of update using digital map based on PDA_based surveying mapping system. This object is achieved by developing wireless communication module of PDA which is adaptable to Totalstation, and contents for its usage. It is achieved by drawing up transformation module of dxf file to editing the text file and the drawing. And it is achieved by drawing up modification module to layer control. This system will be efficiently used to surveying parts of spatial location information for real time mapping ind point positioning in field work.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.15-21
• /
• 2019

The fourth industrial revolution is noted. It is a smarter factory. At present, research on CNC (Computerized Numeric Controller) is actively underway in the manufacturing field. Domestic CNC equipment, acoustic sensors, vibration sensors, etc. This study can improve efficiency through CNC. Collect various data such as X-axis, Y-axis, Z-axis force, moving speed. Data exploration of the characteristics of the collected data. You can use your data as Random Forest (RF), Extreme Gradient Boost (XGB), and Support Vector Machine (SVM). The result of this study is CNC equipment.

• Journal of the Korea Computer Graphics Society
• /
• v.25 no.3
• /
• pp.133-142
• /
• 2019

In physics-based character animation, trajectory optimization has been widely adopted for automatic motion synthesis, through the prediction of an optimal sequence of future states of the character based on its system dynamics model. In general, the system dynamics model is neither in a closed form nor differentiable when it handles the contact dynamics between a character and the environment with rigid body collisions. Employing smoothed contact dynamics, researchers have suggested efficient trajectory optimization techniques based on numerical differentiation of the resulting system dynamics. However, the numerical derivative of the system dynamics model could be inaccurate unlike its analytical counterpart, which may affect the stability of trajectory optimization. In this paper, we propose a novel method to derive the closed-form derivative for the system dynamics by properly approximating the contact model. Based on the resulting derivatives of the system dynamics model, we also present a model predictive control (MPC)-based motion synthesis framework to robustly control the motion of a biped character according to on-line user input without any example motion data.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.2
• /
• pp.120-126
• /
• 2019

Recently, there is an increasing need for highly precise processing with the rapid development of precision machinery, electrical and electronics, and semiconductor industries. Cutting machine control relies on the operator's sense and experience in tradition, but it has been greatly enhanced by the adoption of CNC(Computerized Numeric Controller). In addition, cutting dynamics technology has been paid attention to reflect the operating state of machine in real time. This paper presents a method to detect and stabilize tool vibration by attaching an acoustic sensor to a CNC machine. The sensed acoustic data is synchronized with the tool position and the abnormal vibration frequency is separated from the collected acoustic frequency, then analyzed to detect the tool vibration. Also the reliability the tool vibration detection and stabilization is improved by applying the cutting dynamic method. The proposed method is analyzed and evaluated in terms of the surface roughness.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.225.2-225.2
• /
• 2012

저궤도 관측용 다중 카메라를 통해 고해상도 위성을 제공할 수 있으며, 지도 제작이나 환경, 농업, 해양 지역 모니터링 등의 목적으로 사용될 수 있다. 특히 항공촬영 및 지구 관측을 통해 수치표고모델(DEM) 추출을 함으로써 촬영지역의 고도정보를 포함하는 입체영상을 얻는데 유용하다. 또한, 달 관측을 위한 관측위성에 장착할 경우 달 표면의 지형을 정밀하게 얻어내어 달표면 고도 지형 지도제작 및 향후 달 탐사선을 통한 달 탐사 시 탐사지역 선정에 필요한 정보를 제공할 수 있다. 다중 카메라를 포함한 탑재체 시스템은 크게 광학부와 카메라 전자부로 구성된다. 광학부에서는 입체촬영 및 줌인이 가능한 광학계를 제공하며, 카메라 전자부에서는 광학계를 통해 검출기로 입사되는 빛에너지를 전자신호로 변환하고, 이를 카메라 전자부 영상출력 형식으로 변환하게 된다. 특히, 다중카메라를 각각 제어하기 위한 정밀제어로직, 다양한 촬영 지원 모드, 다중카메라 영상자료 및 영상처리를 위한 추가적인 영상정보를 제공한다. 본 논문에서는 저궤도 관측용 다중 카메라를 이용한 다양한 활용에 따른 각 모드별 성능분석방법을 제안한다. 이를 위해 각 촬영조건에 따라 필요한 파라미터를 분석하고 실제 활용시 예상되는 성능을 분석해 본다. 또한 다중카메라를 통해 얻어진 영상을 처리하는데 필요한 처리 과정 및 처리된 영상을 활용하는 방법을 제시한다. 특히 다중 카메라 촬영을 통해 얻어진 영상데이터의 특성을 알아보고, 이를 보정 및 처리하기 위해 필요한 추가 적인 정보, 영상파라미터, 처리 단계 및 최종결과물을 검증하는 방법을 제시한다.