• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.98-98
• /
• 2019

중력류 또는 밀도류는 주변 유체에 비해 상대적으로 밀도가 큰 유체가 밀도차에 의한 추진력으로 흐르는 것이다. 중력류의 수치모델링에는 두 가지 어려움이 있다. 즉, 적합한 지배방정식을 구성하여 적용하는 것 그리고 난류의 영향을 합리적으로 반영하는 것이다. 기존 중력류 해석을 위한 지배방정식들은 유체의 연속방정식과 운동량 방정식 그리고 밀도 또는 농도의 이송방정식을 조합하여 구성된다. 이들 지배방정식을 이용한 연구들은 대부분 두 유체 사이의 밀도차가 충분히 작아서 밀도 변동(variations)의 영향은 오로지 부력항에서만 유지된다는 Boussinesq 근사에 근거를 둔다. 그리고 이송방정식에서 밀도 또는 농도의 확산계수을 점성계수의 함수로 표현하기 위해서 Schmidt 수를 이용한다. 수치모델링에서 Schimdt 수는 상수값을 적용하지만, 이 값은 밀도의 연직방향 경사에 근거한 부력빈도(buoyancy frequency)와 난류량의 따라 큰 차이를 보이는 것으로 알려져있다. 한편, 표준 통계학적 난류모델과 벽함수를 적용한 수치모델링은 초기 중력에 의해서 무너지는(slumping) 단계를 넘어 관성력으로 추진되는 단계와 점성 효과가 지배적인 단계에서는 정확도에 현저히 낮아지기 때문에 대부분 큰와모의(large-eddy simulation, LES) 또는 DNS(direct numerical simulation)수준의 고해상도(high-resolution) 해석기법을 적용하여 공학적인 문제에 적용하는 데는 한계가 있다. 이 연구에서는 Boussinesq 근사와 Schmidt 수를 사용하지 않으며, LES 보다 적용이 용이한 DES (detached-eddy simulation)기법을 조합한 다상흐름 수치모델을 적용하여 중력류를 해석을 시도하였다. 수치해석결과를 실험값과 함께 기존 수치모델링 기법으로 구한 수치해와 비교분석하여 이 연구에서 개발 및 적용된 수치모델링 기법의 적용성을 평가한다.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.8
• /
• pp.15-26
• /
• 2018

Recently, as the seismic performance based design methods have been introduced, dynamic numerical analyses need to be performed to evaluate the actual performance of structures under earthquakes. The verification of the numerical modeling is the most important for the performance based design. Therefore, 2-dimensional numerical analyses were performed to simulate the seismic behavior of a pile-supported structure, to provide the proper numerical modeling and to determine of input parameters. A dynamic centrifuge test of a pile group in dry loose sand was simulated to verify the applicability of the numerical model. The numerical modeling was carefully made to reflect the actual condition of the centrifuge test including dynamic soil properties, soil-pile interaction, boundary condition, the modeling of the group pile and structure and so on. The predicted behavior of the numerical analyses successfully simulated the acceleration variation in ground, the moment and displacement of the pile, and the displacement and acceleration of the structure. Therefore, the adopted numerical modeling and the input parameters can be used to evaluate the seismic performance of pile groups.

• Atmosphere
• /
• v.33 no.1
• /
• pp.33-47
• /
• 2023

In this study, for the application of observation errors to the Korean Integrated Model (KIM) to utilize the Constellation Observing System for Meteorology, Ionosphere & Climate-2 (COSMIC-2) new satellites, the observation errors were diagnosed based on the Desroziers method using the cost function in the process of variational data assimilation. We calculated observation errors for all observational species being utilized for KIM and compared with their relative values. The observation error of the calculated the Global Navigation Satellite System Radio Occultation (GNSS RO) was about six times smaller than that of other satellites. In order to balance with other satellites, we conducted two experiments in which the GNSS RO data expanded by about twice the observation error. The performance of the analysis field was significantly improved in the tropics, where the COSMIC-2 data are more available, and in the Southern Hemisphere, where the influence of GNSS RO data is significantly greater. In particular, the prediction performance of the Southern Hemisphere was improved by doubling the observation error in global region, rather than doubling the COSMIC-2 data only in areas with high density, which seems to have been balanced with other observations.

• Journal of the Geological Society of Korea
• /
• v.54 no.6
• /
• pp.683-694
• /
• 2018

Subduction has been the focal point of numerical studies for decades because it plays an important role in the Earth's mass and energy circulations and generates earthquakes and arc volcanoes which are closely related to the human lives. Among the studies on subduction, numerical modeling has been broadly applied to the quantitative studies on the subducting slab in the mantle which cannot be directly observed. In this study, we benchmark the numerical subduction modeling using a finite element package, COMSOL $Multiphysics^{(R)}$ and the results are consistent with the previously reported benchmark results.

• Geophysics and Geophysical Exploration
• /
• v.17 no.3
• /
• pp.155-162
• /
• 2014

We performed MCNP modeling for density log, and examined its reliability and validity comparing the correction curves from physical borehole model. Based on the constructed numerical model, numerical modelings of density sonde in three-inch borehole were carried out under the various conditions such as the existence and type of casing or fluid, and also the stand-off between the sonde and borehole wall. These results of numerical modeling quantitatively reflect effects of casing and fluid in borehole, and moreover, demonstrate constant patterns with interval change from borehole wall. From this study, numerical modeling using MCNP shows a good applicability for well logging, and therefore, can be efficiently used for the calibration of well logging data under the various borehole conditions.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.87-91
• /
• 2006

본 연구의 대상 지역은 전라북도 부안군 변산면 격포리 일대이다. 이 지역의 해안 대수층 내에서 발생하고 있는 해수 침투 현상을 효과적으로 모사하고 지하수 양수정의 설치 및 운영의 영향을 정량적으로 평가하기 위하여 지형과 지층의 구성 등의 수리지질학적 특성을 종합적으로 고려한 지하수 유동 및 염분 이동 삼차원 수치 모델링을 수행하였다. 지하수 양수 전의 정상 상태 수치 모델링 결과에서는 지하수 유동 및 염분 이동의 측면에서 대상지역의 수리지질학적 특성이 잘 반영되어 나타났다. 또한 지하수 양수 시의 비정상 상태 수치 모델링 결과에서는 지형과 지층의 특성에 따라서 염분 이동의 양상이 특징적으로 나타났으며 양수정의 위치에 따른 염분 농도의 시간적 공간적 분포의 변화를 효과적으로 예측할 수 있었다. 이러한 결과들은 향후 연구지역 뿐만 아니라 국내의 다른 해안 지역에서 지하수 자원의 개발 시에 해수 침투의 양상을 파악하고 예측하는데 효과적으로 활용될 수 있을 것으로 기대된다.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.410-417
• /
• 2000

The distinct element method has been effectively applied to the analysis of stability and behavior of jointed rock masses. In this paper the modelling characteristics of different types of distinct element model were investigated. Arch tunnel examples were chosen to compare the calculation results of two computer codes, NURBM and CBLOCK, where the former is based on implicit algorithm, and the other on explicit one. CBLOCK calculations show that joint properties are very important parameters in the stability analysis and that the joint stiffness ratio associated with joint configuration could be used as an indicator, whereas NURBM differ from that. Some other disagreements were also identified.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.291-294
• /
• 2004

최근 들어 위성영상의 사용성 증대와 더불어 고정밀한 공간지리정보의 획득에 대한 관심이 증대되고 있으며, 모델링의 정확도 수준은 수치표고모형, 정사영상 등에 영향을 미치므로 고정밀 모델링 기법을 수행하여야함. 또한 비접근 지역의 경우 많은 기준점을 획득하기 어려우므로 최소 기준점 즉, 2점 의 GPS관측성과와 수치지도를 이용하여 궤도모델링을 수행한 후 모델링(Bundle Adj.)을 수행

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.1
• /
• pp.75-80
• /
• 2016

Numerical modeling based on the finite difference method has been widely used with improved computer technology. However, high-capacity computing resources are required for this technique. To overcome this limitation, we propose an algorithm the employs a logarithmic grid in conjunction with the expanding domain method. The proposed algorithm was verified through comparison with numerical results obtained with a conventional method. The results confirmed that our algorithm can improve computational efficiency.

• Atmosphere
• /
• v.30 no.4
• /
• pp.319-333
• /
• 2020

Aircraft observations constitute one of the major sources of temperature observations which provide three-dimensional information. But it is well known that the aircraft temperature data have warm bias against sonde observation data, and therefore, the correction of aircraft temperature bias is important to improve the model performance. In this study, the algorithm of the bias correction modified from operational KMA (Korea Meteorological Administration) global model is adopted in the preprocessing of aircraft observations, and the effect of the bias correction of aircraft temperature is investigated by conducting the two experiments. The assimilation with the bias correction showed better consistency in the analysis-forecast cycle in terms of the differences between observations (radiosonde and GPSRO (Global Positioning System Radio Occultation)) and 6h forecast. This resulted in an improved forecasting skill level of the mid-level temperature and geopotential height in terms of the root-mean-square error. It was noted that the benefits of the correction of aircraft temperature bias was the upper-level temperature in the midlatitudes, and this affected various parameters (winds, geopotential height) via the model dynamics.