• Defense and Technology
• /
• no.8 s.258
• /
• pp.44-51
• /
• 2000

유도탄을 수직으로 발사하는 방식은 유도탄 자체 추진기관 추력을 이용한 추력발사(일명 hot launch) 방식과 발사대의 사출장치를 이용한 가스사출발사(일명 cold launch) 방식의 2가지로 분류할 수 있다. 대부분의 수직발사 유도무기체계는 추력발사 방식을 채택하여 왔으며, 가스사출발사 방식은 80년대 초반에 들어와서 적용하기 시작한 신기술로 러시아가 최초로 수직발사 대공 유도무기체계인 S300계열 및 TOR 체계에 채택한 이후 계속 발전되고 있다.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.485-488
• /
• 2006

본 논문은 수평 런 길이와 수직 런 길이를 이용해 필기체 한글 문자의 자획 두께를 구하고, 그 자획 두께를 이용해 입력 문자의 자소를 수평 성분과 수직 성분으로 분리하는 기술을 제안한다. 수평 성분과 수직 성분 분석은 각도와 관계없이 자획 두께와 수평 런 길이의 변화량만을 이용해 구한다. 분리된 수평 성분 자획과 수직 성분 자획은 오프라인 필기체 한글 인식을 위한 요소 기술 중 하나인 자소 분리를 위한 특징이 된다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.218-220
• /
• 2019

전 세계 주요 항만에서 컨테이너터미널의 자동화가 추진되고 있으나, 기존 터미널 자동화 모형은 수출입 화물의 단순 양하에 초점을 둔 서구형 수직 배열 중심으로 개발되었다. 이로 인해 다양한 On Dock 서비스가 이루어지는 우리나라 컨테이너 항만의 경우, 터미널 자동화 추진에 많은 어려움이 존재한다. 이에 본 연구는 컨테이너터미널 On Dock 서비스 중 주요 업무인 공컨테이너 관리의 효율성 제고를 위해, 수직 배열 자동화 컨테이너터미널에서 활용할 수 있는 새로운 구내 이송모델을 제시하고 효과를 분석하였다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.321-327
• /
• 2013

Purpose: To investigate a correlation between vertical fixation disparity and stereopsis by analyzing distribution of types of vertical fixation disparity. Methods: In this study, RANDOT(R) stereotest partly using random dot was used in stereopsis tests. The vertical fixation disparity in close proximity categorized fixation disparity slope into six types on the basis of the result of measurement in when two thin lines, one for one eye looks, become overlapped as a line by adding into prism with Wesson fixation disparity card while maintaining a distance of 25 cm from patients. Results: In the types of near vertical fixation disparity curve, targeting 43 people, the first type 55.82% was the most distributed, the second type is the least 23.25%, the third type of 4.65%, the fourth type of 4.65%, the fifth type of 6.98%, the sixths types of 4.65% were distributed. The result of a correlation analysis, which shows the degree of linear correlation between two variables, represented that stereopsis is not correlated with Y-intercept (r = -0.07) which show vertical fixation disparity, associated phoria (r = -0.03) and dissociated phoria (r = -0.00), but it was not statistically significant (p>0.05). Fixation disparity slope of vertical fixation disparity (r = 0.36) was shown to have a positive correlation with stereopsis. It has a low positive correlation and a meaningful statistics (p<0.05). The Y-intercept which indicates vertical fixation disparity was also not associated with stereopsis (r = -0.07) and dissociated phoria (r = -0.03), and this was not statistically significant (p>0.05), while it had a high correlation as well as a statistically significant with associated phoria (r = 0.89). There was a negative correlation between Y-intercept and fixation disparity slope of vertical fixation disparity (r = -0.33). It showed a low relationship but statistically valuable (p>0.05). As a result of regression analysis, the stereopsis was changed as 7.631" if vertical fixation disparity changes 1' and the vertical fixation disparity changed as 0.017' if stereopsis changes 1', and the change was statistically significant (p<0.05). Conclusions: The study shows that there is a low correlation between stereopsis and vertical fixation disparity, and it is difficult to determine stereopsis only using vertical fixation disparity. Therefore, it suggests other factors above vertical fixation disparity have greater influence on stereopsis.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.46-52
• /
• 2009

The purpose of this study was to compare the skeletal maturation of cervical vertebrae according to vertical skeletal patterns in the adolescents. Lateral cephalograms of 198 subjects(10 years old), 216 subjects(12 years old), and 138 subjects(14 years old) were reviewed, and subjects were classified according to vertical skeletal patterns. The 30 subjects were selected with the greatest predominance of vertical growth, and the other 30 subjects, with the greatest predominance of horizontal growth; these subjects comprised the vertical and horizontal groups, respectively. For evaluating of skeletal maturation, the concavity of inferior border and verticohorizontal ratio of cervical vertebrae were observed and measured according to age. The measurements were analyzed statistically by SPSS computerized program. The results were as follows : In general, the concavity of the inferior border of the cervical vertebrae was greater in the horizontal group than the vertical group in all of the 10, 12, 14 year olds, but was not statistically significant. The vertico-horizontal ratio of the 3rd and 4th vertebra of the horizontal groups was a significantly larger than the vertical groups in 12 year olds but did not show any statistical significance in 10 and 14 year olds. There were a weak negative correlations between SUM, FMA and the vertico-horizontal ratio for each groups at 12 ages.

• Journal of Educational Research in Mathematics
• /
• v.23 no.2
• /
• pp.135-152
• /
• 2013

The purpose of this study is to navigate to the desired direction for the figure of number line through the extensive analysis of number line in middle school textbooks and literatures. For the efficient achievement of this purpose, three research questions were posed as follows: First, we compare the figures of number line in textbooks of Korea and other countries. Korean math textbooks mark the arrow on both sides of number line. But, however, coordinate plane was marked with arrow on only positive direction of number line. In contrast, the majority of secondary school textbooks in several foreign countries has the arrow only on positive direction. Second, the change in the figure of number line has been analyzed historically from two perspectives. From the first to 2007-revised curriculum, math textbooks of Korea were analyzed. Since the 6th curriculum, the number of textbooks with arrows on both sides has increased sharply. That is, textbooks with one arrow almost have disappeared. It is strange that any explanation for this abrupt change can't be found. The following analysis was also performed on published foreign literatures since Descartes. There was no arrow in the early figures of number line. But after 19th century, number lines with one arrow have begun to appear. Third, based on the previous study, we propose a reasonable way for the figure of number line. In fact, we claim that, in terms of linguistic symbols, the number line should be with only one arrow on positive side.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.74-74
• /
• 2015

최근 홍수의 특성과 피해 양상은 과거와는 다르게 변화하고 있으며, 급격한 도시화로 인하여 기존 하천유역의 저류 능력이 감소하였으며 이러한 한계를 극복하기 위하여 이미 외국에서는 대심도 터널을 활용한 홍수재해 관리방안이 오래전부터 활용되어 왔다. 본 연구에서는 대심도 터널의 유입구, 수직갱, 감세지, 배수터널과 같은 시설물 중 대심도 터널 설계 시 수직 유입구를 통해 유입되는 유량의 에너지를 완화하고 효과적으로 배수 할 수 있도록 중요한 역할을 하는 감세지의 효율적인 깊이 산정을 위하여 수리모형실험을 실시하였으며, 모형은 Froude 상사법칙을 사용하여 원형의 1/18크기로 제작하였다. 본 연구에서 실시한 감세지 모형의 깊이는 0.278 m(원형 5.0 m), 0.417 m(원형 7.5 m)이며, 각 감세지 깊이별 수직 유입구 3개소(저지수직구1, 저지수직구2, 고지수직구) 및 5가지의 유량 CASE에 대하여 감세지 바닥면 압력을 비교?분석 하였다. 수직 유입구 3개소의 설계조건에 따른 감세지 깊이별 바닥면 압력 분포 평가를 실시한 결과 저지수직구1의 감세지 깊이 0.278 m(원형 5.0m)에서는 최대 압력이 4번 지점에서 $0.075kg/cm^2$(원형 1.30 MPa)이 측정 되었으며, 0.417 m(원형 7.5m)에서는 최대 압력이 1번지점에서 $0.089kg/cm^2$(원형 1.54MPa)이 측정되었다. 또한 저지수직구2의 감세지 깊이 0.278 m(원형 5.0 m)에서는 최대 압력이 1번 지점에서 $0.074kg/cm^2$(원형 1.28 MPa)이 측정 되었으며, 0.417 m(원형 7.5 m)에서는 최대 압력이 2번지점에서 $0.088kg/cm^2$(원형 1.52 MPa)이 측정되었다. 고지수직구의 감세지 깊이 0.278 m(원형 5.0 m)에서는 최대 압력이 3번 지점에서 $0.082kg/cm^2$(원형 1.42 MPa)이 측정 되었으며, 0.417 m(원형 7.5 m)에서는 최대 압력이 1번지점에서 $0.092kg/cm^2$(원형 1.59 MPa)이 측정되었다. 본 연구에서 실시한 수리모형실험의 결과 저유량에서 고유량으로 갈수록 최대압력지점은 반시계방향으로 움직이는 것을 알 수 있으며, 이는 수직 유입구의 설계조건에 따른 수직갱에서의 회전수차에 의하여 발생하는 것으로 분석하였다. 따라서 적절한 감세지 깊이 산정을 위해서 대심도터널의 수직 유입구(유입구형태, 수직갱)의 평가가 함께 유기적으로 이루어져야 할 것으로 판단된다.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.4
• /
• pp.71-76
• /
• 2015

Recently, light emitting diodes (LEDs) have been studied to improve their efficiencies for the uses in various fields. Particularly in the aspect of chip structure, via hole type vertical LED chip is developed for improvement of light output power, and heat dissipations. However, current vertical type LEDs have still drawback, which is current concentration around the n-contact holes. In this research, to solve this phenomenon, we introduced isolation layer under n-contact electrodes. With this sub-electrode, even though the active area was decreased by about 2.7% compared with conventional via-hole type vertical LED, we could decrease the forward voltage by 0.2 V and wall-plug efficiency was improved approximately 4.2%. This is owing to uniform current flow through the area of n-contact.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.1
• /
• pp.31-39
• /
• 2018

The collapse of the posterior occlusion destroys the normal occlusal plane and causes excessive wear reducing the vertical dimension. Reduced vertical dimension of occlusion causes not only aesthetic and functional problems but also overloading on the temporomandibular joints and abnormalities of muscle nerve system. In order to improve the collapsed occlusal relationship, it is necessary to consider the change of the vertical dimension. It is necessary to make a precise diagnosis and analysis before the treatment and to evaluate the adaption of patient to the new vertical dimension of occlusion. A patient with excessive overbite often has occlusal problems of tooth wear and tooth eruption. Considering these considerations, overall prosthodontic restoration is required to solve the problem. A patient of 68 year old man in this case who suffered major tooth wear and maxillary posterior teeth loss was treated with elevation of vertical dimension of occlusion by maxillary removable dental prosthesis and mandibular fixed prosthesis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.1
• /
• pp.56-63
• /
• 2018

Severe dental attrition causes pathological changes of the tooth, collapsed occlusion, and functional and aesthetic complications and can also result in a decrease in occlusal vertical dimension. Before increasing the vertical dimension with full-mouth rehabilitation, it is important to determine the amount of vertical dimension through accurate diagnosis. In this case, a 77 year old elderly male patient on anticoagulant medication with generalized attrition and fracture of teeth was treated with full-mouth rehabilitation in order to recover vertical dimension and aesthetics. Accurate clinical and radiographic examination, diagnostic, wax-up, and occlusal vertical dimension evaluation were step by step performed considering pre-medical history and old age. Patient adaptability was evaluated using an occlusal splint and interim restoration. After 3 months of stabilization with interim restoration, definitive prostheses were fabricated. Satisfactory functional and esthetic outcomes are observed after 6 months of follow up.