• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.4
• /
• pp.404-411
• /
• 2022

The patient in this case was an 80-year-old female who had lost #16, 13, 26, 37, 36, 35, 44, 45, 46, 47 teeth. The patient showed loss of posterior support, loss of vertical dimension of occlusion, and deep anterior overbite. Her chief complaint was esthetic and functional discomfort. She wanted to restore normal facial aesthetic shape and masticatory function through prosthetic treatment. Clinical evaluation, radiographic examinations, and facial and oral analysis were performed. Interocclusal rest space was excessive than the average. Distance between labial vestibules and zenith of central incisors, and lower facial ratio were below the average. Taken together, occlusal rehabilitation was determined through increasing 4 mm of vertical dimension on premolars. In this case, a patient who lacked restoration space with deep bite in the anterior region due to loss of the posterior teeth support restored a stable occlusal relationship and harmonious anterior and lateral guidance through fixed and removable prosthesis with increased vertical dimension.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.2
• /
• pp.205-211
• /
• 2017

Loss of posterior support may cause extrusion of antagonistic teeth and excessive wear of remaining teeth which often leads to the destruction of the occlusal plane. In such cases, it is critical to verify the need to increase vertical dimension of occlusion (VDO). Should you increase VDO, provisionalization is crucial in evaluating function and esthetics. Double scanning technique is a useful method when fabricating definitive restoration that mimic provisional restoration. In this case, a patient with apparently no loss of VDO and insufficient interocclusal space for dental materials due to loss of posterior support and extrusion of antagonistic teeth was rehabilitated using double scanning technique.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.1
• /
• pp.33-43
• /
• 2023

Pathological wear across the entire dentition causes problems such as collapsed occlusal plane, reduced vertical dimension, anterior premature contact, inadequate anterior guidance, and tooth migration, thereby induce symptoms such as temporomandibular joint disorder, reduced masticatory efficiency, and tooth hypersensitivity. For the treatment of patients with excessive wear, evaluation of vertical dimension should be preceded along with analysis of the cause. The patient in this case was a 45-year-old female with a history of orthognathic surgery. Through clinical examination, radiographic examination, and model analysis, overall tooth wear, interdental spacing in the anterior maxillary region, retruded condylar position, and insufficient interocclusal space for prosthetic restoration were confirmed. Full mouth rehabilitation with increased vertical dimension was planned, the patient's adaptation to the new vertical dimension was evaluated with a removable occlusal splint and temporary prosthesis, and cross-mounting was performed based on the temporary restoration to fabricate the definitive zirconia prosthesis, maintaining the adjusted vertical dimension. It showed satisfactory functional and esthetic results through stable restoration of the occlusal relationship.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.3
• /
• pp.234-244
• /
• 2023

Tooth wear refers to the loss of dental hard tissue caused by various physiological and pathological causes, and excessive pathological wear can cause complications such as pathological changes in dimensions, occlusal disharmony, loss of function, and aesthetic problems. The cause of tooth wear can be caused by attrition, abrasion, corrosion and abfraction, and it is known to act in a multifactorial etiology in interocclusal activity. In patients with excessive pathological wear, it is important to determine whether or not the vertical dimension of occlusion is reduced, and complete oral rehabilitation should be achieved with the adaptation of the neuromuscular and temporomandibular joint through accurate diagnosis and analysis. The patient in this case was a 63-year-old male patient, who presented discomfort to cold beverage due to severe tooth wear. After analysis of the patient's vertical dimension of occlusion, a full mouth rehabilitation was performed with increasing vertical dimension of occlusion. The goal of treatment was to improve the occlusal plane with the equal-intensity contact of all teeth, harmonious anterior guidance and immediate disclusion of all posterior contacts. After rehabilitation, the patient was satisfied with function and esthetic appearance.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.2
• /
• pp.153-160
• /
• 2020

Gradual tooth wear is a natural process of aging, but pathological wear over physiologic ranges leads to functional and esthetic problems. The loss of posterior support may cause pathological wear of anterior teeth, which results in reduction of vertical dimension and disharmony of occlusal plane. To solve this problem, determination of proper vertical dimension considering centric relation is necessary. This case report presented 71-year-old male, who had the severe wear of lower anterior teeth due to loss of posterior support. By meticulous evaluation, a full mouth rehabilitation with elevation of vertical dimension was planned. After 8 months of follow-up, stable occlusal scheme is maintained and patient was satisfied with clinical outcome functionally and esthetically.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.4
• /
• pp.320-329
• /
• 2022

Physiological wear of occlusal surface is inevitable throughout the lifetime, and considered to be normal. Pathologic wear, however, may cause fatal damage to the occlusal surface and destroy esthetics and proper anterior guidance. In such cases, rehabilitation of occlusal wear should be followed by thorough evaluation and diagnosis. In this present case, severe occlusal wear was found in the labial surfaces of mandibular anterior teeth and palatal surfaces of maxillary anterior teeth. Occlusal vertical dimension was evaluated and decided to be regained due to insufficient amount of restorative space. After determining new occlusal vertical dimension, diagnostic wax-up is usually performed to continue prosthodontic treatment. In this case with collapsed occlusion and loss of occlusal vertical dimension, conventional diagnostic wax-up was replaced with various digital devices. Diagnostic wax-up was digitally performed in the software and provisional prosthesis was fabricated with digital tools. With verification with provisional prosthesis, the entire dentition was rehabilitated with newly set occlusal vertical dimension and proper anterior guidance.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.1
• /
• pp.50-57
• /
• 2020

The loss of posterior support and the abnormal jaw relation can cause pathologic findings. If deep bite patients with multiple missing teeth, can not have the stable posterior contact, the mandible moves posteriorly, and consequently the overjet and overbite get worse. And when the mandibular irregular occlusal plane is corrected, it is easier to have the bilateral balanced occlusion with the maxilla. So the treatment goal is to give proper posetrior support and establish appropriate anterior guidance, and ultimately provide improved mastication and esthetics recovery. In this case, a 68 year old man, having deep bite without posterior support was evaluated by the vertical dimesion decision flow-chart. An available prosthetic height, anterior occlusal relation such as overjet, overbite and the esthetic part such as facial height and the cephalometric analysis are the factors to be considered.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.405-415
• /
• 2019

Excessive tooth wear can cause irreversible damage to the occlusal surface and can alter the anterior occlusal relationship by destroying the structure of the anterior teeth needed for esthetics and proper anterior guidance. The anterior deep bite is not a morbid occlusion by itself, but it may cause problems such as soft tissue trauma, opposing tooth eruption, tooth wear, and occlusal trauma if there are no stable occlusal contacts between the lower incisal edge against its upper lingual surface. The most important goal of treatment is to form stable occlusal contact in centric relation. In this case report, patients with decrease in vertical dimension and anterior deep bite due to maxillary posterior tooth loss and excessive tooth wear were treated full mouth rehabilitation with increased vertical dimension to regain the space for restoration and improve anterior occlusal relationship and esthetics. The functional and aesthetic problems of the patient could be solved by the equal intensity contact of all the teeth in centic relation (CR), anterior guidance in harmony with the functional movement, and restoration of the wear surface beyond the enamel range.

• The korean journal of orthodontics
• /
• v.28 no.2 s.67
• /
• pp.255-268
• /
• 1998

This study was investigated to assess the difference of facial height and occlusal plane inclination between normal occlusion group and class II malocclusion group. The subjects consisted of 50 normal occlusion (male 25, female 25) and 50 class II(male 25, female 25) malocclusion patients. All subjects are adult. lateral cephalogram was taken with standard method traced, and digitized for each subjects. The computerized statiscal analysis was carried out with SPSS program. The results were as follows 1. In class II malocclusion group, variables significant different from normal occlusion group were as follows ; SN-FOP, FH-BOP, MP-BOP, AB-BOP, AB-FOP, Facial plane-BOP, FP-FOP 2. In class II malocclusion group, the posterior facial height -especially posterior lower facial height-was significantly smaller than normal occlusion group.(P<0.05) 3. In class II malocclusion group, the angles between occlusal plane and upper and lower incisor, the angle between upper molar and bisected occlusal plane were significantly larger than those of normal occlusion group. (P<0.05) 4. L1 to Mandibular plane (mm) was a unique factor of occlusal plane position that showed significant difference in class II malocclusion group. 5. The correlation between overbite and occlusal plane inclination existed in class II malocclusion group, but the correlation didn't exist in normal occlusion group.

• The korean journal of orthodontics
• /
• v.30 no.6 s.83
• /
• pp.687-698
• /
• 2000

The purpose of this study was to evaluate the changes of skeletodental patterns during Class II treatment and its retention period. Forty two patients of Class II malocclusion, which was treated with nonextraction or first premolar-extraction were selected and their lateral cephalograms were examined in this study. Various skeletodental changes in lateral cephalograms of pre-treatment, post-treatment and retention were measured by superimposition in reference to the cranial base for jaws, the palatal plane for maxillary teeth, and mandibular plane for mandibular teeth. The data were analyzed by paired t-test. In this study, occlusal plane showed the significant anterior downward steepening after active treatment, and remained during retention period. In the nonextraction group, maxillary incisors were retracted and extruded during treatment. Maxillary molars were extended, and mandibular molar were uprighted, with no mesial movement. In the extraction group, both maxillary and mandibular incisors were retracted and extruded. Maxillary molars were extruded and moved mesially, and mandibular molars were extruded and moved mesially with no mesial tilting. During retention period in both groups, there were tendencies of labial tipping of maxillary incisor, and mesial tipping of maxillary and mandibular molar. But the changes were not significant and most of teeth showed no change in vortical and horizontal direction.