• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6906-6914
• /
• 2014

This study examined the remodeling characteristics of traditional urban housing for lease focusing on Hanok in the traditional urban housing neighborhood of Bukchon. Furthermore, the space syntax was used as the main analytic approach to objectively revealing the change in social properties of each spatial element because each room forms its status in the structural relation with many rooms and accommodates the special change in traditional housing and modern life. These findings revealed the following; spatial division between the landlord and tenant results in a hierarchical change in the yard and main hall and strengthens the privacy of the space of the landlord.

• Tunnel and Underground Space
• /
• v.9 no.2
• /
• pp.131-140
• /
• 1999

Although there have been lots of geological or geotechnical surveys for construction sites, most of data obtained from these surveys have not been reused properly for the future construction work due to the absence of systematic management of data management system. This research, therefore, has focused on the development of DB system, Rockmass Information Management System(RIMS), to save, manage and reuse these abandoned data, specially test data of rock and rockmass with site conditions. RIMS has not only the basic functions of inputting, modifying, and dynamic searching of data but also several data control modules which can manage, input and correct, analyse and report data. Furthermore it saves data such as strata status, laboratory test results, in-site test results, and so on using 3-dimensional data stacking up structure. It is using x, y coordinates to represent horizontal positions and depth to represent vertical position of data. With the development of RIMS, this research has analyzed and classified present conditions of data in RIMS according to region, rock type, etc.

• Journal of the Korean Magnetics Society
• /
• v.11 no.4
• /
• pp.163-167
• /
• 2001

The rotation of uniaxial anisotropy field of 700 ${\AA}$ thick sputtered NiFe thin film due to magnetic annealing was investigated. NiFe film was annealed in a magnetic field which is perpendicular to the initial induced uniaxial anisotropy field. The NiFe film becomes nearly isotropic after 1 hour annealing at 160 $^{\circ}C$. With increase of annealing temperature over 160 $^{\circ}C$, the film gets uniaxial anisotropy field again. An abrupt increase of H$\sub$c/ was observed with annealing temperature over 400 $^{\circ}C$. The X-ray diffraction analysis and Auger electron spectroscopy with Ar ion etching showed extensive grain growth in NiFe film with (111) texturing and interdiffusion with adjacent Au electrode layer by 400 $^{\circ}C$ magnetic annealing.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.145-154
• /
• 2003

In this study, the variation in excess pore pressure during dissipation is estimated by using successive cavity expansion theory and finite difference technique based on axisymmetric uncoupled linear consolidation theory with separate consideration of magnitude and initial distribution $\Delta{u}_{oct}$induced by changes of octahedral normal stress, and $\Delta{u}_{shear}$ induced by changes of octahedral shear stress. The coefficient of consolidation is also estimated by trial and error procedure until the predicted dissipation curve matches the measured curve at a typical degree of dissipation. The proposed method is applied to the results of miniature piezocone tests at Louisiana State University calibration chamber system. Based on the results of interpretation and the comparison with experimental measurements and those from other solutions, the prediction dissipation curves show a good match with those measured during dissipation tests and the values of coefficient of consolidation estimated by proposed method are more close to the range of laboratory measurements than those of other theories.

• The Journal of the Korea Contents Association
• /
• v.5 no.5
• /
• pp.287-295
• /
• 2005

This paper describes user context awareness system, which is one of the most essential technologies in various application services of ubiquitous computing. The proposed system used two-akial accelerometer, embedded in SenseWear(R)PRO2 Armband (BodyMedia). When it was worn on the right upper arm of the experiment subjects, MAD (mean of absolute difference) value of the sensor data was calculated to quantify the amount of the wear's activity. Using this data, PC-based fuzzy inference system was realized to distinguish human motion states, such as, lying, sitting, walking and running and to recognize the restricted emergency situations. In laboratory experiment, the amount of activities for tying, sitting, walking and running were 0.204 g/s, 0.373 g/s, 2.808 g/s and 16.243 g/s respectively. The recognition rates of human motion states were 96.7 %, 93.0 %, 95.2 % and 98.4 % respectively for lying, sitting, walking and running. The recognition rate of restricted emergency situation was 100%.

• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.747-756
• /
• 2010

This study is on the spatial composition of accommodation area in accommodation barge. The accommodation barge which is used as living facilities for offshore plants' workers can be classified into Accommodation Work Barge, Accommodation Pipe Lay Barge and Multi-purpose Accommodation Barge. We study on the spatial composition of accommodation area in Accommodation Work Barge, most frequently used, through analyzing G.A drawings of the barges. The spatial composition has great influences into the convenience and amenity for workers' daily life in the accommodation area of accommodation barge. The spatial composition of accommodation area shows many characteristics not in horizontal arrangement on any deck but in vertical space arrangement on layers of decks. The particular types of vertical space composition can be classified into 'Centralized Type' and 'Dispersive Type'. These two types will be the basis of space planning for new accommodation barge.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.265-265
• /
• 2014

일반적으로 태양전지 및 반도체 공정에서 불순물 주입 과정인 도핑(Doping)공정은 크게 몇 가지 방법으로 구분해 볼 수 있다. 소성로(Furnace)를 이용하여 열을 통해 불순물을 웨이퍼 내부로 확산시키는 열확산 방법과 진공 챔버 내부에서 전자기장을 걸어 이온을 극도로 가속시켜 진행하는 이온 주입(Ion implantation)이나 이온 샤워(Ion shower)를 이용한 도핑 방법이 있다. 또한 최근 자외영역 파장의 레이저광을 조사하여 광화학 반응에 의해 도펀트 물질를 분해하는 동시에 조사 부분을 용해하여 불순물을 도포하는 기법인 레이져 도핑(Laser doping) 방법이 개발중이다. 그러나 레이져나 이온 도핑 공정기술은 고가의 복잡한 장비가 필요하여 매출 수익성 및 대량생산에 비효율적이며 이온 주입에 의한 박막의 손상을 치료하기 위한 후속 어닐링(Post-annealing) 과정이 요구되는 단점을 가지고 있고 열확산 도핑 방법은 정량적인 불순물 주입 제어가 어렵고 시간 대비 생산량의 한계가 있다. 반면 대기압 플라즈마로 도핑을 할 경우 기존에 진공개념을 벗어나 공정상에서 보다 저가의 생산을 가능케 할 뿐아니라 멀티 플라즈마 소스 개발로 이어진다면 시간적인 측면에서도 단연 단축시킬 수가 있어 보다 대량 생산 공정에 효과적이다. 따라서 본 연구에서는 새로운 도핑 방법인 대기압 플라즈마를 이용한 도핑 공정기술의 가능성을 제안하고자 도핑 공정 시 웨이퍼 내 전류 패스(Current path)에 대한 메카니즘을 연구하였다. 대기압 플라즈마 방전 시 전류가 웨이퍼 내부에 흐를 때 발생되는 열을 이용하여 도핑이 되는 형식이란 점을 가정하고 이 점에 대한 원리를 증명하고자 실험을 진행하였다. 실험 방식은 그라운드(Ground) 내 웨이퍼의 위치와 웨이퍼 내 방전 위치에 따라 적외선 화상(IR image: Infrared image) 화상을 서로 비교하였다. 적외선 화상은 실험 조건에 따라 화상 내 고온의 표식이 상이하게 변하는 경향성을 나타내었다. 이 고온의 표식이 전류 패스라는 점을 증명하고자 시뮬레이션을 통해 자기장의 전산모사를 한 결과 전류 패스의 수직 방향으로 자기장이 형성이 됨을 확인하였으며 이는 즉 웨이퍼 내부 전류 패스에 따라 도핑이 된다는 사실을 명백히 말해주는 것이며 전류 패스 제어의 가능성과 이에 따라 SE(Selective Emitter) 공정 분야 응용 가능성을 보여준다.

• Korean Journal of Construction Engineering and Management
• /
• v.2 no.3 s.7
• /
• pp.101-109
• /
• 2001

Application of system form is very effective to continuous horizontal or vertical walls of the apartment housing. Though the system forms that are used in the construction field have the advantage of concrete quality improvement and increasing number of usages, there are some problems in reaching early planning scheduling goal due to schedule delay and low productivity. This study is initiated to solve the problem and suggest some improvements searching for reasons that diminish the productivity. A case study was done in apartment construction field where system form was used and the productivity is analyzed by work sampling. Finally, productivity improvements for assembly of the form, internal form and external form are suggested, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1764-1769
• /
• 2014

Numerical investigations have been conducted on the junction that connect the multi-tubular section and the single shell section in order to evaluate applicability of hybrid sections in wind turbine towers instead of conventional single shell towers. Major characteristics in structural details include extension of multi-tubular member into shell end section, installation of wing stiffeners, and different layout of floor beams. Elastic and nonlinear incremental analyses were conducted to examine stress concentration patterns and ultimate behaviors, respectively. Based on evaluation of structural performance due to vertical and horizontal forces, it has been confirmed that installation of floor beams and wing stiffeners sensitively affect ultimate strength of global wind tower.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.3
• /
• pp.481-488
• /
• 2009

The purpose of this study was to investigate the hokey scoop motion of elite male hockey players. To accomplish the goal of this study, eight male hockey players participated and were divided into two groups (superior group Vs. inferior group). To find differences between groups, a three-dimensional motion analysis was performed with seven infrared cameras (SF: 200Hz). After analyzed their scoop motion, followings were found. 1) The non-significant(p>.05) increase in anterior CG displacement and velocities were found in superior group compare with inferior group) 2) There were no significance found in anterior-posterior stick velocities between groups. However, significant (p<.05) increase in vertical stick velocities were found in superior group than inferior group indicating the superior group has more skilled in scooping. 3) The significant(p<.05) increase in adductional and internal rotational stick released velocities were found in superior group than inferior group.