• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.2
• /
• pp.145-151
• /
• 1994

앞 턱 부위가 짧고 후방으로 위치해 있을 때 턱의 높이를 증가시키고 전방으로 돌출시키는 축조 이부성형술의 방법으로는, 매식체 삽입술, 골 절단술, 골 절제술 또는 이들을 동시에 시행하는 혼합술등이 행해져 왔다. 그러나 매식체 삽입술에서는 감염 또는 매식체의 유동성 등의 합병증의 발병이 빈발하고 매식체의 밑 부위에 골이 흡수된다든지 연조직의 변화를 예측하기 어렵다든지 하는 복잡한 문제점들이 종종 보고되고 있다. 따라서 매식체를 이용하지 않는 골 절단술이나 골 절제술만을 이용한 다양한 방법의 이부성형술이 많이 시행되고 있다. 하악골이 전후방 관계로 발육부전인 환자에게 양측 하악지 시상분할술을 시행하여 전방 이동시킨 후 앞 턱의 위치를 좀더 개선하기 위하여 $Michel{\'{e}}t$ 테크닉의 변형법을 이용한 이부성형술을 추가로 시행하였다. 이 방법의 이부성형술은 턱의 수직적, 수평적 길이를 증가시키기 위하여 하악결합면 부위에 장부와 장붓구멍 모양을 한 골 절단술을 시행하고 광범위한 연조직경을 보존하여 골편으로의 혈류 차단을 최소화하였으며 나사를 이용한 견고한 고정을 용이하게 하였다. 이 술식은 턱을 수직적으로 증가시킬 때 두 골편 사이의 공간에 골 이식을 시행할 필요가 없으며, 금속판을 이용하지 않아도 정확한 위치에 골편을 고정하기가 용이하고, 또한 고정용 나사가 향후 골형성 부위에 위치하게 된다는 장점을 경험하게 되어 이에 한 증례를 보고하는 바이다.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.8
• /
• pp.97-105
• /
• 2004

The vertical roller mill is the important machine grinding and mixing various crude materials in the manufacturing process of portland cement. Table liner is one of grinding elements of vertical roller mill and is subjected to the cyclic bending stress by rollers and the centrifugal force by rotation of table. It demands $4{\times}10^7$ expense of life but has $4{\times}10^6~-8{\times}10^6$ cycle. It fractures at the edge of grinding path of outside roller The repair expense fur it amounts to 30% of total maintenance of vertical roller mill. Therefore, this study shows the fracture mechanism of table liner of vertical roller mill using HDM and fatigue analysis

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.163-169
• /
• 2003

The vertical roller mill is the important machine grinding and mixing various crude materials in the manufacturing process of portland cement. Table liner is one of grinding elements of vertical roller mill and is subjected to the cyclic bending stress by rollers load and the centrifugal force by rotation of table. It demands $4{\times}10^7$ cycle but has $4{\times}10^6{\sim}8{\times}10^6$ cycle. It fractures at the edge of grinding path of outside roller. The repair expense for it amounts to 30% of total maintenance of vertical roller mill. Therefore, this study shows the fracture mechanism of table liner for vertical roller mill using HDM and fatigue analysis

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.89-92
• /
• 2007

In the present study, the flow field in a square container with various comer rounding is studied to investigate drain flow characteristics. An attempt has been made to understand the mechanism that is responsible for vortex suppressing by the different radius of rounding at the comer. For this purpose, flow visualization studies using PIV (Particle Image Velocimetry) are employed to determine the flow patterns in a square tank. Results are obtained when there is no draining and with draining. The flow field is visualized both in horizontal and vertical planes.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.8-15
• /
• 2006

In this report Smart UAV structural analysis of the aft fuselage is presented. Aft fuselage needs to have enough strength and stiffness considering loads of the Vertical and Horizontal Stabilizer together. It has a big hole for the purpose of engine exhaust duct on its side body. In addition, much attention is needed in high temperature region due to material strength deterioration.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.4
• /
• pp.265-273
• /
• 2002

In this paper, wave absorbing characteristics of a horizontal submerged punching plate are investigated throughout the calculation and the experiment. The punching plate with the array of circular holes can force the flow to separate and to form eddies of high vorticity and cause significant energy loss. As an analytic tool, the linear water wave theory and the eigenfunction expansion method is applied. Darcy's law that the normal velocity of the fluid passing through the punching plate is linearly proportional to the pressure difference between two sides of the punching plate is assumed. The proportional constant called the porous coefficient is deeply dependent to the porosity. To obtain the relationship between the porosity and the porous coefficient the systematic model test for the punching plates with 6 different porosities is conducted at 2-dimensional wave tank. It is found that the porous coefficient is linearly proportional to the porosity(b=57.63P-0.9717). It is also noted that the optimal porosity value is near P=0.1 and the optimal range of submergence depth is $d/h\\leq0.2$ within entire frequency range.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.1
• /
• pp.1-7
• /
• 2017

When implementing butt joint welding of two plates, it is useful to attach end-tabs made of a metal with high heat conductivity (e.g., copper) at the front and back sides of the welded plates to prevent the bead from rolling down and prevent defects that may occur at the tips of the weld zone. In this study, the fin shape, which is known to have good heat discharging characteristics by natural convection, has been applied to enhance the cooling performance of the end-tab. From both experiment and numerical analysis, it was confirmed that end-tabs with fin-shaped holes have better heat discharging performance than end-tabs without holes. Through thermal and fluid flow analysis, the cooling rates of end-tabs with different hole shapes were estimated in order to figure out characteristics of shape factor that are important for the heat discharging performance. As a result, we found that the structure including vertical fins with optimal fin gap was the best-performing shape.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.4
• /
• pp.437-445
• /
• 2015

A design method for a perforated panel is suggested to reduce the level of incident noise without obstructing the flow of incoming fluid. The key idea was to insert an array of 1/4 wavelength tubes around the holes of the perforate panel. First, various case studies were performed for a unit model with only one hole. In order to avoid any increase in the panel thickness, the unit model was vertically divided into three layers, and only the middle layer was used as the design domain. The number and array of 1/4 wavelength tubes connected to the hole were optimized to obtain the widest effective frequency range in the transmission loss curve as possible. Then, the optimally designed unit model was converted to a periodic array in the perforated panel to achieve the design goals. Even if the target frequency and the target transmission loss were set to 1000 Hz and 10 dB, respectively, the suggested design method for the a perforated panel could achieve noise reduction for various target values.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.3
• /
• pp.289-302
• /
• 2006

For a reconstruct draft of the Gyupyo (Gnomon) in King Sejong Era, we collected a lot of documents of the Chosen Dynasty. With the result we made a reduced model by 1/10 and drawing set for the Gnomon in Sejong Era. It is composed of the Gyu, Yongpyo, Hoengryang (a beam), Yeongbu and granitic prop. You can read the scale where the shadow of vertically-standing stick touches the horizontal Gyu. A Shadow-Define. (Yeongbu) was used to focus the shadow cast by the sun's center, measuring the (gnomon) shadow length precisely. A Yeongbu is made of a leaf of copper in the middle of which is pierced a pin-hole for the tiny optical image of the sun which tilted to face the incident sunlight, used the principle of the a pin-hole camera and Scheimplug principle.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.1
• /
• pp.64-70
• /
• 2002

The marine algal flora and community structure of Gahakri in Jindo Gun, southern coast of Korea, was investigated monthly during September, 1993-August, 1994. As the results, a total of 87 species including 11 greens, 15 browns and 61 reds was identified. The marine algal flora was classified as the mixed flora based on the species composition. The dominant species of algal community throughout the year was Gloiopeltis furcata, and the subdominants were Sargassum thunbegii, Ulva pertusa and Hizikia fusiformis. In their vertical distribution, the species of algal community distributed yearly (or seasonally) from upper to lower intertidal zones were Gloiopeltis furcata-Corallina pilulifera, Myelophycus simplex, Gloiopeltis tenax (May$\~$October), Dumontia simplex, Sargassum thunbergii-Hizikia fusifomis, Ulva pertusa, Chondracanthus intemedius, Carpopeltis affinis.