• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06b
• /
• pp.483-485
• /
• 2012

본 논문에서는 수중 영상 환경에 특화된 자동 수중 영상 보정 시스템을 제안한다. 수중 영상은 빛 희석(light attenuation)을 인한 가시거리 제한, 낮은 영상 대비(low contrast) 그리고 부유물질과 같은 영상의 노이즈 등의 특수한 환경적 제약이 따른다. 기존의 수중 영상 보정 알고리즘은 색 및 대비(contrast) 보정, 가시거리 확장 및 노이즈 제거 기법등을 이용한 부분적으로 보정 연구가 진행되어 왔는데, 부분적 영상 보정 기법으로는 선명한 영상의 결과를 얻기 힘들다. 제안한 통합 수중 영상 보정 시스템은 색 및 대비 보정, 부유물질 제거를 위한 노이즈 필터링, 객체 윤곽선 강화를 위한 기법들을 통합하여 수중 영상에 특화하였다. 실험을 통하여 제안된 수중 영상 보정 시스템의 효율성을 확인하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.330-335
• /
• 2017

This study applied SONAR(Sound Navigation And Ranging) to the inspection and evaluation of underwater structures. Anactual river bridge was chosen for inspection and evaluation. SONAR and an optical camera were operated together to analyze the underwater image of the bridge. SONAR images were obtained by various methods to remove the environmental variables from the field experiment, and it was confirmed that the reliability of detecting damaged areas on piers was decreased when using SONAR alone. The SONAR equipment and the optical camera can be used simultaneously to overcome the limitations of SONAR in inspecting underwater structures.These results can be used as basic data for the development of similar technologies for underwater structure inspection.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.4
• /
• pp.150-160
• /
• 2008

The present domestic underwater and ocean facilities management depends on analysis with the naked eye. This study performs quantitative analysis to improve conventional methods, analyze spatial situation of underwater facilities. This research is divided into two steps; underwater image distortion correction and image mosaic step. First, underwater image distortion correction step is for the production of underwater target, calculates the correction parameters, and then developed the method that convert the original image point to whose distortion is corrected. Second step is for the obtaining pipe images installed in the underwater, corrects the distortion, and then transforms a coordinates of the correction pipe image. After coordinate transformation, we make the mosaic image using the singularities. As a result, when we measure the distance between pipe and underwater ground and compare with calculation value on mosaic image, it is showed that RMSE is 0.3cm.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.91-98
• /
• 2016

Detection and classification of underwater objects in sonar imagery are challenging problems. This paper proposes a system that detects and identifies underwater objects at the sea floor level using a sonar image and image processing techniques. The identification process of underwater objects consists of two steps; detection of candidate regions and identification of underwater objects. The candidate regions of underwater objects are extracted by image registration through the detection of common feature points between the reference background image and the current scanning image. And then, underwater objects are identified as the closest pattern within the database using eigenvectors and eigenvalues as features. The proposed system is expected to be used in efficient securement of Q route in vessel navigation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.5
• /
• pp.645-652
• /
• 2015

In underwater, such as fish farm and sea, turbidity is increased by water droplets and various suspended, therefore light attenuation occurs depending on the depth also caused by the scattering effect of light float. In this paper, in order to improve the visibility of underwater images obtained from these aquatic environment, we propose a visibility enhancement method using a haze removal method based on dark channel prior and a trained color transform model. In order to train a color transform model, we used underwater pattern images captured from Pohang and Yeosu, and to measure the performance of the proposed method, we carried out experiment of visibility enhancement using underwater images collected from Yeosu, Geomundo and Philippines. The results show that the proposed method can improve the visibility of underwater images of various locations.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.4
• /
• pp.370-376
• /
• 2023

In the underwater image, it is not clear to distinguish the shape of the target due to underwater noise and low resolution. In addition, as an input of deep learning, underwater images require pre-processing and segmentation must be preceded. Even after pre-processing, the target is not clear, and the performance of detection and identification by deep learning may not be high. Therefore, it is necessary to distinguish and clarify the target. In this study, the importance of target shadows is confirmed in underwater images, object detection and target area acquisition by shadows, and data containing only the shape of targets and shadows without underwater background are generated. We present the process of converting the shadow image into a 3-mode image in which the target is white, the shadow is black, and the background is gray. Through this, it is possible to provide an image that is clearly pre-processed and easily discriminated as an input of deep learning. In addition, if the image processing code using Open Source Computer Vision (OpenCV)Library was used for processing, the processing speed was also suitable for real-time processing.

• Journal of Broadcast Engineering
• /
• v.17 no.4
• /
• pp.684-694
• /
• 2012

In the underwater environment, light is absorbed and scattered by water and floating particles, which makes the underwater images suffer from color degradation and limited visibility. Physically, the amount of the scattered light transmitted to the image is proportional to the distance between the camera and the object. In this paper, the proposed visibility enhancement. method utilizes depth images to estimate the light transmission and the degradation factor by the scattered light. To recover the scatter-free images without unnatural artifacts, the proposed method normalizes the degradation factor based on the value of each pixel of the image. Finally, the scatter-free images are obtained by removing the scattered components on the image according to the estimated transmission. The proposed method also considers the color discrepancies of underwater stereo images so that the stereo images have the same color appearance after the visibility enhancement. The experimental results show that the proposed method improves the color contrast more than 5% to 14% depending on the experimental images.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.475-476
• /
• 2018

In this paper, we propose a method to measure the number of biofouling attached to underwater structures. This method measures the number of biofouling based on digital images captured in underwater. The number of biofouling was measured after correcting the image quality of underwater images for accurate population counting. In order to measure the number of biofouling, Maxima value in the image was found.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.845-850
• /
• 2018

In this paper, we propose a method to estimate the number of biofouling attached to the surface of marine structures. This method estimates the number of biofouling by calculating the region maxima using images taken in underwater. To do this, we analyze the correlation between the region maxima and the number of biofouling. The analysis showed that there is a significant correlation between the number of region maxima and the number of biofouling. By using the results of this analysis, the experiments were conducted on images taken in the underwater. Experimental results show that the higher the region maxima of the image, is greater than the number of biofouling in the image. The proposed method can be used as an important technology in computer vision for underwater images.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.3
• /
• pp.203-208
• /
• 2010

In this paper, we convert underwater acoustic signal made by sonar system into digital image. We propose the algorithm that detects target candidate and emphasizes information of target introducing image processing technique for the digital image. The process detecting underwater target estimates background noise in underwater acoustic signal changing irregularly, recomposes it. and eliminates background from original image. Therefore, it generates initial target group. Also, it generates weighted map through proceeding doppler information, ensures information for target candidate through filtering using weighted map for image eliminated background noise, and decides the target candidate area in the single frame. In this paper, we verified that proposed algorithm almost had eliminated the noise generated irregularly in underwater acoustic signal made by simulation, targets had been displayed more surely in the image of underwater acoustic signal through filtering and process of target detection.