• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.479-479
• /
• 2018

하천의 수심, 유속, 하상경사, 하상재료, 만곡도 등과 같은 물리적 특성에 따라 생물서식처로서 다양한 특성을 나타내고 그 특성들에 의해 서식처의 유형을 구분할 수 있다. 이러한 서식처 유형에 따라 수중음향의 특성이 달라지며, 수중음향의 서식지의 양적 표시자로서 잠재력으로 인해 최근 많은 연구들이 시도되고 있다. 본 연구에서는 인공적인 영향을 적게 받은 자연하천으로 양양 남대천 12개 지점을 대상으로 하여 서식지의 형태에 따른 수중음향과 하천의 수리적 인자에 따른 관계를 파악하고자 하였다. 서식처 유형으로는 빠른 유속에 얕은 수심을 가지고 있는 여울(riffle), 수심이 깊고 유속이 느린 소(pool), 낙차가 있는 계단형 여울(step riffle)에 대해 조사하였다. 수중배경음은 여울과 계단형 여울이 유사하게 나타났으며 소는 상대적으로 낮은 배경음을 나타내었다. H2, H4, H5, H9, H10 지점은 여울 형태로 유속에 따라 H2, H5, H4, H9 지점 순으로 음압레벨이 낮아지는 경향을 보였으며, H10지점은 H9, H4 지점에 비해 낮은 유속임에도 높은 음압레벨을 보였다. 이는 H10 지점의 하상이 조도가 매우 큰 전석으로 이루어져 나타나는 현상으로 판단된다. H3, H6, H7, H8, H12 지점은 소 형태로 H12 지점을 제외하고 대체로 낮은 음압레벨을 보였으며, H3과 H6지점에서는 저주파수에서 높은 음압레벨을 보였다. 이는 수심이 깊은 경우 상류의 저주파수의 음파가 잘 전달되기 때문으로 판단된다. H1과 H11지점은 계단형 여울로 낮은 수심에서 빠른 유속을 가진 H11지점과 느린 유속을 가진 H1 지점에서 대체로 높은 음압레벨을 나타내었다. 이는 낙차에 의한 수중음향 발생에 의한 것으로 판단된다. 세 가지 유형에 따른 수중 음향을 비교하였을 때 음압레벨은 계단형 여울, 여울, 소 순서로 높게 나타났다. 결과적으로 수중음향이 서식처의 수리적 특성에 따라 다양한 특성을 나타내고 있으며, 이를 통해 생물서식처를 평가하기 위한 새로운 방법으로 수중음향의 활용 가능성을 제시하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.4
• /
• pp.313-319
• /
• 2023

In this paper, a time series machine learning model, Long Short Term Memory (LSTM), is applied into the bubble flow noise data and the underwater projectile launch noise data to predict missing values of time-series underwater noise data. The former is mixed with bubble noise, flow noise, and fluid-induced interaction noise measured in a pipe and can be classified into three types. The latter is the noise generated when an underwater projectile is ejected from a launch tube and has a characteristic of instantaenous noise. For such types of noise, a data-driven model can be more useful than an analytical model. We constructed an LSTM model with given data and evaluated the model's performance based on the number of hidden units, the number of input sequences, and the decimation factor of signal. It is shown that the optimal LSTM model works well for new data of the same type.

• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.457-465
• /
• 2007

In this paper, polymer-modified repair materials using polymer dispersions with six repair methods are prepared with various polymer-cement ratios, and tested for compressive and flexural strengths through each curing condition such as dry cure, water cure, and freezing and thawing cyclic action. And, the adhesive interface between the polymer-modified mortar and mortar substrate is observed by a scanning electron microscope. From the test results, the compressive and flexural strengths of cement mortar repaired by polymer-modified mortar are improved with a rise in the polymer-cement ratio regardless of the type of polymer and curing conditions. Such an improvement in the strengths of polymer-modified repair materials to ordinary cement mortar is explained by the high adhesion of polymer-modified mortar. Strength reduction of polymer-modified repair materials after freezing and thawing cyclic actions is recognized, but it is lower than that of unmodified mortar. Especially, cement mortar repaired by polymer-modified mortar with a St/BA emulsion has good strength properties compared with those of SBR latex and PA emulsion. Accordingly, it is judged that polymer-modified mortars with a St/BA emulsion are possible to use as repair materials to ordinary cement mortar and concrete.

• Journal of Pharmaceutical Investigation
• /
• v.17 no.1
• /
• pp.41-46
• /
• 1987

Oil in water microemulsion containing soybean oil and egg phosphatide was prepared by vacuum high shear mixing and high pressure homogenizing. The laser particle sizer, Coulter counter and photomicroscope were used to determine the particle size distribution at each cycle of homogenizing. Particularly, the laser particle sizer(dynamic light scattering method) was applied to the study of particle size distribution behavior below $1\;{\mu}m$. It was found that the particle size distribution below $1\;{\mu}m$ was shifted to lower size range as the number of passing cycle was increased. Beyond the 7th cycle, however, the particle size distribution was not varied.

• Journal of Pharmaceutical Investigation
• /
• v.18 no.1
• /
• pp.9-13
• /
• 1988

Physicochemical properties of oil in water microemulsions containing soybean oil and egg phosphatide were observed for 3 weeks under the storage condition of $4^{\circ}C$ refrigerator. Changes in major fatty acid content, particle size distribution, rheogram, acid value and pH value were measured by gas chromatograph, laser particle sizer, Coulter counter and rheometer. From above experiments following conclusions were obtained; 1) Mean particle diameter was shifted from 240 to 266mm. 2) No significant changes were observed in the content of major fatty acids of soybean oil, rheogram, acid value and pH value.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.1
• /
• pp.77-89
• /
• 2020

Submerged floating tunnel (SFT) is a type of tunnel that allows tunnel segments to float underwater by buoyancy, and is being actively studied in recent years. When the submerged floating tunnel is connected to the ground, the tunnel and the bored tunnel inside the ground must be connected. There is risk that the stress will be concentrated at the connection between the two tunnels due to the different constraints and behavior of the two tunnels. Therefore, special design and construction methods should be applied to ensure the stability around the connection. However, previous studies on the stability at the connection site have not been sufficiently carried out, so study on the basic stage of the stability at connection site are necessary. In this study, numerical analysis simulating the connection between submerged floating tunnel and the bored tunnel confirmed that the shear strain concentration occurred in the ground around the connection, and it was analyzed that the structural factors can be handled during construction to have effects on the stability of the ground around the connection. Numerical results show that the risks from disproportionate displacements in the two tunnels can be mitigated through the construction of grouting material and joint design. Although the results from this study are qualitative results, it is expected that it will contribute to the determination of structural factors and risk areas that should be considered in the design of connections between the submerged floating tunnel and bored tunnel in the future studies.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.4
• /
• pp.345-353
• /
• 2007

We have obtained a topographical image nondestructively for a Cu thin film in liquid using a near-field scanning microwave microscope (NSMM), its operating frequency was 3.5 to 5.5 GHz. We have kept a distance of 10 nm between tip and sample using a quartz tuning fork shear force feedback system. As an end of tip was attached to one prong of the quartz tuning fork has a length of 2 mm, the only tip of tuning fork was immersed in water tank. A loss cause by evaporation in water tank is regulated with actuator was connected to a supplementary tank. Moreover, using a revise program of LabView, we could increase the accuracy of a measurement in liquid.

• Polymer(Korea)
• /
• v.29 no.6
• /
• pp.543-548
• /
• 2005

Double-layered spheres play an important role in controlling drug delivery for pharmaceutical application, because of the low initial burst compared with single-layered spheres and targetable delivery to specific organ. But it has drawback in loading drug and controlling size. In this study, we developed double-layered spheres using relatively simple oil-in-water (O/W) solvent evaporation method witw/without ultrasonication and investigated the size variation of the double-layered microspheres on the contents of poly(lactide- co-glycolide) (PLGA). Double - layered spheres were char-acterized by scanning elecron microscope (SEM), camscope, and confocal fluorescence laser microscope (CFLM). Double-layered spheres showed smooth surfaces and obvious difference between core and corona by SEM observation and camscope. We observed the fluorescent core in the double-walled spheres composed of FlTC-dextran and PLGA using CFLM. It was found that the core of the microsphere was dextran and the corona of the fabricate microsphere was PLGA. Also, the more PLGA concentration, the more the size of the fabricating double-layered sphere observed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.9
• /
• pp.763-771
• /
• 2014

As a preliminary study on the spray behavior characteristics of emulsified fuel, the fuel properties (viscosity, surface tension, and density) and evaporation characteristics of a fuel droplet were investigated. The emulsified fuel was made by mixing diesel and $H_2O_2$. In addition, the macroscopic spray behavior characteristics such as the spray penetrations and spray angles of the emulsified and diesel fuels were compared. The stirring condition of the emulsified fuel was a 9:1 mixture of the diesel fuel and the surfactant span 80. The mixing ratios for the hydrogen peroxide were set at EF2, EF12, EF22, EF32, EF42, EF52, EF62, EF72, EF82, and EF92. The injection pressures were set at 400, 600, 800, and 1000 bar. We found that as the mixing ratio of the hydrogen peroxide was increased from EF2 to EF52, the viscosity of the emulsified fuel increased. However, afterward, the viscosity of the emulsified fuel gradually decreased and approached the viscosity value of the diesel fuel. Therefore, generally oil-in-water emulsions were used for the hydrogen peroxide mixing ratios up to 52 (EF52), and water-in-oil emulsions were used for the hydrogen peroxide mixing ratios above 52. Finally, the spray behavior characteristics (spray penetration and spray angle) of the emulsified fuel were found to be almost independent of the mixing ratio.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.3
• /
• pp.237-254
• /
• 2019

This study is focused on the effect of sodium stearate, which is a hydrophilic gelling agent affecting on the hardness of O/W solid sunscreen cosmetic. The sunscreen of the O/W (oil in water) type is stable, good in use, and relatively easier to stabilize than the sunscreen of the W/O (water in oil) type. Methods for increasing the stability by using emulsifiers, electrolytes, and wax or oil have been studied for solid sunscreen. This study was intended to develop a solid sunscreen stabilized by increasing the hardness using sodium stearate as an O/W type containing more than 40% moisture. Response surface methodology (RSM) was used to analyze the factors affecting the hardness of cosmetics, and sodium stearate, polyol and oil were used for each factor. The hardness and the reaction value was measured using a rheometer. As a result, sodium stearate showed a meaningful value (p < 0.05) among the three factors affecting hardness. In addition, the use of sodium stearate as a hydrophilic gelling agent increased the usability and stability of the solid sunscreen.