• Journal of the Korean Society of Food Science and Nutrition
• /
• v.11 no.1
• /
• pp.57-68
• /
• 1982

In order to investigate the effect of dietary protein and energy on growing female and male rats, Sprague-Dawley 90 female rats and 54 male rats of 3 weeks old weighing approximately 70-80g and 65-75g, respectively, were subjected to feeding trials for 8 weeks and then subsquently to metabolic trials for 2 weeks. Three dietary energy levels (3200, 3600, 4000 kcal ME/kg) were employed and each energy level contained three protein levels (15, 25, 35% of 3600 kcal ME/kg) and three fat levels (10, 20, 40% of 3600 kcal ME/kg) by addition of an appropriate amount of carbohydrate and the following results were obtained. The body weight gain of female rats was highest for LPHE ration but that of male rats was highest for LPME ration. The weight gains both of female and male rats were not affected by the level of protein. Food efficiencies both of female and male rats was affected by the level of protein, whereas that of male rats was not. Protein efficiencies of female and male rats were highest at low protein level and tended to decrease as the level of protein increased, but that of female rats was highest at high energy level, while that of male rats was highest at medium energy level. The analysis of the body composition after feeding trials for 8 weeks has shown that the contents of body water and protein were not affected by protein level both in female and male rats. The content of body fat increased remarkably as the protein and energy levels increased in case of female rats, but it was not affected by the protein and energy levels in case of male rats. From the above-mentioned experimental results it may be con eluded that the best formula of diet of growing female rats may be composed of low protein (13%) and high energy levels (4000 kcal/kg) whereas that for male rats may be composed of low protein (13%) and medium energy levels (3600 kcal/kg), since all the efficiencies of food, protein and energy have shown to be best at these levels.

• Electronics and Telecommunications Trends
• /
• v.26 no.3
• /
• pp.50-60
• /
• 2011

사회와 산업이 발전함에 따라 국가적 재난재해는 다양성과 복잡성이 날로 증가하고 있고 그 피해규모 또한 대규모화되고 있는 추세이다. 최근 공공안전에 대한 국민들의 기대수준이 높아짐에 따라 고도화된 국가공공 재난안전무선통신 인프라의 필요성이 국내외적으로 대두되고 있으며 국가의 주도적인 역할이 요구되고 있는 상황이다. 본 고에서는 국내외 재난안전무선통신망의 구축 현황을 살펴보고, 우리나라의 차세대 재난안전무선통신망의 주요 요구기능과 그 요구기능에 적합할 것으로 예상되는 재난안전무선통신을 위한 후보 기술들을 알아보고자 한다.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1997.11a
• /
• pp.181-194
• /
• 1997

향후 전개될 멀티미디어 정보화 사회 구축을 위한 가장 적합한 통신 방식은 ATM (비동기 전송 방식)으로 음성, 영상, 데이터를 실시간, 비실시간 데이터로 구분하여 복합적으로 전송할 수 있다. 또한 유선 ATM 망은 이동성을 보장하는 무선 ATM 망으로 확장되어질 수 있다. 유선 ATM 망과 무선 ATM 망의 차이점은 이동성과 전송 환경의 특성으로 발생하는 오류 확율이다. 현재 무선 ATM 망에서 증가된 오류율을 유선 ATM 망의 수준으로 감소시키기 위한 여러 연구들이 진행되고 있다. 본 논문에서는 무선 전송 환경의 버스트 오류에 효과적인 인터리빙 기법을 무선 전송단의 한정된 대역폭에 할당되는 ATM 셀의 가상 회선/경로의 수만 감소시켜 일반 ATM 셀과의 연동성을 보장하는 Modified 셀에 적용을 제안하였고 일반 ATM 셀 전송과 비교하여 성능 향상에 대하여 평가하였다. 모의실험 결과 제안된 기법은 버스트 오류 환경에서 셀 손실율이 버스트 오류의 크기에 따라 효율적으로 감소되며 또한 이중 헤더 적용으로 셀 손실율을 감소시킴을 알 수 있었다. 본 기법은 인터리빙과 이중헤더의 사용으로 추가되는 오버헤더가 없으며, H-ARQ를 적용했을 때 불가능한 실시간 데이터 서비스에도 적합하다는 장점이 있다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.674-683
• /
• 2010

The current study was performed to examine the agricultural suitability of the cultivated upland nearby abandoned mining areas in Korea using three different scientific risk assessment models of Korea, USA and UK. For this, three mining sites DM, MG and KS were selected among 687 abandoned mines through preliminary risk assessment. A wide range of parameters were obtained through analysis of both soil and crop samples from the selected areas for heavy metal concentration and questionnaires to the communities along with the selected mining sites. Heavy metal concentration in soil samples was lower than the values previously reported by the Ministry of Environment (ME, 2002). However, both As and Cd concentration in the soil samples exceeded the concern level for agricultural area of the Soil Environment Conservation Act. Judging from the contaminant criteria for the crops, only Zn level in pepper, soybean and corn from the mining area DM exceeded the criteria whereas As, Cd, $Cr^{6+}$, Cu, Hg, Ni, Pb did not exceed the criteria. It was demonstrated that there would be human health risk by Pb accumulated in crops from both mining areas MG and KS when estimated by the risk assessment models of Korea and USA. Against it, results of the risk assessment model of UK showed human health risk by Pb in the crops from all study areas.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.1
• /
• pp.7-13
• /
• 2020

Purpose: This study was to evaluate marginal and internal discrepancy of 3-unit fixed dental prostheses (FDP) fabricated by subtractive manufacturing and additive manufacturing. Materials and methods: 3-unit bridge abutments without the maxillary left second premolar were prepared (reference model) and the reference model scan data was obtained using an intraoral scanner. 3-unit fixed dental prostheses were fabricated in the following three ways: Milled 3-unit FDP (MIL), digital light processing (DLP) 3D printed 3-unit FDP (D3P), stereolithography apparatus (SLA) 3D printed 3-unit FDP (S3P). To evaluate the marginal/internal discrepancy and precision of the prosthesis, scan data were superimposed by the triple-scan protocol and the combinations calculator, respectively. Quantitative and qualitative analysis was performed using root mean square (RMS) value and color difference map in 3D analysis program (Geomagic control X). Statistical analysis was performed using the Kruskal-Wallis test (α=.05), MannWhitney U test and Bonferroni correction (α=.05/3=.017). Results: The marginal discrepancy of S3P group was superior to MIL and D3P groups, and MIL and D3P groups were similar. The D3P and S3P groups showed better internal discrepancy than the MIL group, and there was no significant difference between the D3P and S3P groups. The precision was excellent in the order of MIL, S3P, and D3P groups. Conclusion: Within the limitation of this study, the 3-unit fixed dental prostheses fabricated by additive manufacturing showed better marginal and internal discrepancy than the those of fabricated by subtractive manufacturing, but the precision was poor.

• The Journal of the Korea Contents Association
• /
• v.15 no.7
• /
• pp.128-137
• /
• 2015

Going through rapid changes, the field of information technology (IT) has launched many innovative products. Some of those products have spread, forming a stable market, whereas others have disappeared. The purpose of the study is to purpose a theoretical model to show changes in the importance of competition factors over the three stages. Our study applied the innovation adoption stage model of the Innovation Diffusion Theory (IDT) to the industry life cycle of the Industry Life Cycle (ILC) Theory resulting in three stage of introduction, growth, and maturity, and defined a model of market characteristics according to time. By using the model, we analyzed the case of notebook computers and tablet and checked the fitness of the model. Results show that five competition factors worked differently according to time. In the introduction stage, relative functionality and relative playfulness are important competition factors. In the growth stage, compatibility is added to those two factors. In the last maturity stage, compatibility, complexity, and cost level are important competition factors.

• The Journal of the Korea Contents Association
• /
• v.6 no.7
• /
• pp.31-41
• /
• 2006

This study is to analyze the effect of compatibility of information characteristics and information technology structure on AIS performance. This used financial and non-financial factors as the characteristics of management accounting information and used information technology structure as centralization and decentralization classified by Ahtuv et.(1989) and Fiedler et.(1996). 425 sampling companies are selected randomly and 137 of them were used in this study. The results of this study are as follows. First, In compatibility analysis between the characteristics of management accounting information and information technology structure, in case of companies which have centralized data process system, AIS performance of companies which use financial information is higher than that of companies which use non-financial information. However, no meaningful results show statistically. in case of companies which have decentralized data process system, AIS performance of companies which use non-financial information is higher than that of companies which use financial information. Also the statistical results show the meaning at the p. < 0.01.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.05a
• /
• pp.113-117
• /
• 2006

This study is to analyze the effect of compatibility of information characteristics and information technology structure on AIS performance. This used financial and non-financial factors as the characteristics of management accounting information and used information technology structure as centralization and decentralization classified by Ahtuv et.(1989) and Fiedler et.(1996). 425 sampling companies are selected randomly and 137 of them were used in this study. The results of this study are as follows. First, In compatibility analysis between the characteristics of management accounting information and information technology structure, in case of companies which have centralized data process system, AIS performance of companies which use financial information is higher than that of companies which use non-financial information. However, no meaningful results show statistically. in case of companies which have decentralized data process system, AIS performance of companies which use non-financial information is higher than that of companies which use financial information. Also the statistical results show the meaning at the p < 0.05.

• Journal of the Korean Society for information Management
• /
• v.21 no.3
• /
• pp.203-225
• /
• 2004

This study is to investigate the characteristics of the Invisible Web and many search services designed to serve as gateways to the Invisible Web and to evaluate searching the Invisible Web in the Services. The four services for searching the Invisible Web were selected to search the Invisible Web with 11 queries, that are Google as portals, ProFusion and Search.com as Invisible Web meta search engines, and IncyWincy as Invisible Web search engines. It was found that the effectiveness of Google's Invisible Web searching was better compared with the three Invisible Web search tools but the difference between the four systems was not significant((${\alpha}$=.055) The Invisible Web meta searching was better than the Web meta searching in the three search tools at the statistically significant level. The effectiveness measurement based on the ranks and relevance degree(quality) of relevant documents retrieved seemed appropriate to the ranked search results.

• Annual Conference of KIPS
• /
• 2002.11c
• /
• pp.2463-2466
• /
• 2002

본 연구에서는 학습자의 수준에 맞는 적합한 학습 내용과 평가 문제를 제공하고, 그 평가 결과를 분석하여 반복학습 및 심화학습을 효과적으로 제공하는 웹기반 퍼지 교수 시스템을 제안한다. 이를 위해 코스웨어를 설계시 학습목표의 중요도, 학습내용의 난이도, 학습목표와 학습내용과의 관련성과 각 항목의 가중치를 고려한 퍼지 함수에 의해 퍼지 소속성을 가진 퍼지 언어 변수로 각 프레임에 대한 수준을 표현한다. 이와 같이 퍼지 함수를 이용함으로써 학습자의 수준을 분석하고, 이에 적절한 학습 및 평가 내용을 제공하는데 여러가지 다양하고 불확실한 요소들을 고려하여 처리함으로써 보다 융통성 있고 효과적인 교수 학습 방법을 지원할 수 있다.